zeke01 Posted April 7, 2020 Author Share Posted April 7, 2020 Deluxe version, the arms are adjustable . 2 Link to comment Share on other sites More sharing options...
NailheadBob Posted April 8, 2020 Share Posted April 8, 2020 JustDave Snap on tools master steering wheel puller set # CG-20, maybe what you are looking for, attached is a picture of it, this set in the picture is not complete, just to show if this is what you are looking for. I do see them from time to time on e-bay. If you need more information let me know. Bob Link to comment Share on other sites More sharing options...
Real Steel Posted April 8, 2020 Share Posted April 8, 2020 4 hours ago, gossp said: you drop the valve stems through them to keep them in order. The back sides are for organizing your valves Link to comment Share on other sites More sharing options...
Terry Bond Posted April 8, 2020 Share Posted April 8, 2020 Here are a couple of tool assortments out in my "museum." First one is a cabinet full of early tools, many for Model T Fords. I bought this cabinet complete as you see it. Good story, catch me at Hershey for the details. Next, is an old tool chest full of stuff. It was owned by a mechanic who worked at a Norfolk Studebaker dealership beginning in 1916. I have several souvenirs form that old dealership, but this tool chest is filled with neat stuff that I've found very handy over the years. Last item is one of several little old socket sets I've got but this one has a great label inside the lid. I have a good friend in NJ who has collected odd wrenches for years and It's simply amazing what hangs on the walls in his basement. Terry 2 Link to comment Share on other sites More sharing options...
JustDave Posted April 8, 2020 Share Posted April 8, 2020 Yes that’s the type of steering wheel puller,thanks for the info and model number, now I know what to look for, Dave Link to comment Share on other sites More sharing options...
NailheadBob Posted April 8, 2020 Share Posted April 8, 2020 Here is a timing light that power source is 110 volts from your house power outlet. Link to comment Share on other sites More sharing options...
zeke01 Posted April 9, 2020 Author Share Posted April 9, 2020 Ever use one of these? Link to comment Share on other sites More sharing options...
gossp Posted April 9, 2020 Share Posted April 9, 2020 1 minute ago, zeke01 said: Ever use one of these? not successfully. 1 Link to comment Share on other sites More sharing options...
ryan95 Posted April 9, 2020 Share Posted April 9, 2020 Is that a leaf spring separator? Link to comment Share on other sites More sharing options...
Isaiah Posted April 9, 2020 Share Posted April 9, 2020 The first jack is most likely a wagon or a buggy jack . I got oner similar Ill try to get a picture of it. In have a Yellow cab floor jack that uses a chain. I m trying to get it all freed up Link to comment Share on other sites More sharing options...
JV Puleo Posted April 9, 2020 Share Posted April 9, 2020 Carriage jack... it goes under the hub and lifts the carriage or wagon off the floor. I have a set of 4 of them. They could probably be used with a brass car to lift it off the tires for winter storage but they aren't all that stable. You wouldn't want to crawl under. Link to comment Share on other sites More sharing options...
zeke01 Posted April 9, 2020 Author Share Posted April 9, 2020 9 hours ago, ryan95 said: Is that a leaf spring separator? Yes, it is used to separate spring leaves in order to lubricate them. Zeke 1 Link to comment Share on other sites More sharing options...
Tom Devoe Posted April 9, 2020 Share Posted April 9, 2020 Ah-ha moment here. Is this why some early valves have a slot or two holes in the face? I've only ever used the suction cup style. 2 Link to comment Share on other sites More sharing options...
KRK Sr. Posted April 9, 2020 Share Posted April 9, 2020 Here is an old ad for one, you got is close and with one push of the handle it was off the ground, no jacking this jack or the ones pictured above! 1 Link to comment Share on other sites More sharing options...
Bill Boudway Posted April 9, 2020 Share Posted April 9, 2020 Hi, Leg vice! I have one that I rescued from a Dumpster at the transfer station a few years ago. Nice find. Someone called mine a blacksmith's vice. Link to comment Share on other sites More sharing options...
Bill Boudway Posted April 9, 2020 Share Posted April 9, 2020 Hi, Yes, I know it's a bit brace. Extra credit if you can tell what trade might find it useful Link to comment Share on other sites More sharing options...
kgreen Posted April 9, 2020 Share Posted April 9, 2020 10 minutes ago, Bill Boudway said: Hi, Yes, I know it's a bit brace. Extra credit if you can tell what trade might find it useful I'm guessing a plumber would use this so he could drill holes close to a wall. 1 Link to comment Share on other sites More sharing options...
Dandy Dave Posted April 9, 2020 Share Posted April 9, 2020 Everyone has pairs of Vice Grip's. But how many have a NOS pair still in the box with instructions even. Found these in a hoarder house I cleaned out years ago and just could not bring myself to use them. I guess that makes me a hoarder of sort's. 🤪 Dandy Dave! 2 Link to comment Share on other sites More sharing options...
Dandy Dave Posted April 9, 2020 Share Posted April 9, 2020 Vice Grips Continued... Link to comment Share on other sites More sharing options...
Bush Mechanic Posted April 9, 2020 Share Posted April 9, 2020 3 hours ago, Bill Boudway said: Hi, Leg vice! I have one that I rescued from a Dumpster at the transfer station a few years ago. Nice find. Someone called mine a blacksmith's vice. Yes, we called it a Blacksmith's vise when I was a kid. My old man was a Blacksmith, and that's what he called it. I have subsequently been corrected to call it a leg vise. Either way, it's a handy piece of kit. You won't break it. I have a spare, about twice the size, but I doubt I'll ever wear mine out. You were lucky to find one in a skip, as they are keenly sought by the new wave of hobby blacksmiths, in this country. An anvil or a bellows will cost you deep in the purse around these parts. Link to comment Share on other sites More sharing options...
Bush Mechanic Posted April 9, 2020 Share Posted April 9, 2020 3 hours ago, Bill Boudway said: Hi, Yes, I know it's a bit brace. Extra credit if you can tell what trade might find it useful That's a beauty. Perhaps it pre-dates the ratchet type. Just makes you appreciate our battery drills! I don't miss drilling green fence posts with a brace and bit. Link to comment Share on other sites More sharing options...
Ben Bruce aka First Born Posted April 9, 2020 Share Posted April 9, 2020 On 4/7/2020 at 6:14 PM, Tinindian said: Speaking of valve tools. As long as the head of the valve has the two holes! Ben Link to comment Share on other sites More sharing options...
zipdang Posted April 9, 2020 Share Posted April 9, 2020 22 hours ago, zeke01 said: Ever use one of these? The bull I was tending to didn't like it one bit. 3 Link to comment Share on other sites More sharing options...
zeke01 Posted April 10, 2020 Author Share Posted April 10, 2020 30 minutes ago, zipdang said: The bull I was tending to didn't like it one bit. I have used what you are referring to. Not at all the same. Not at all. Ouch Zeke Link to comment Share on other sites More sharing options...
Isaiah Posted April 10, 2020 Share Posted April 10, 2020 Here is a couple of my jacks the green one is a National Standard made in Niles Mi the taller one is a Ashland Products Ashland O Link to comment Share on other sites More sharing options...
Dandy Dave Posted April 10, 2020 Share Posted April 10, 2020 Another old tool used on automotive stuff. I know what it is and have used it. Let's see if anyone else knows? Link to comment Share on other sites More sharing options...
oldford Posted April 10, 2020 Share Posted April 10, 2020 (edited) Model T magnet charger... Dave, I'll swap that for the model A engine... Frank Edited April 10, 2020 by oldford (see edit history) 2 Link to comment Share on other sites More sharing options...
oldford Posted April 10, 2020 Share Posted April 10, 2020 14 hours ago, Ben Bruce aka First Born said: As long as the head of the valve has the two holes! Ben If the valves have two holes, they are probably two piece valves. i would remove all two piece valves from my cars, if they were there... Frank Link to comment Share on other sites More sharing options...
Olsarge Posted April 10, 2020 Share Posted April 10, 2020 15 hours ago, Dandy Dave said: Vice Grips Continued... I didn't even know Vice Grips came with instructions. I would have never thought of holding the reinforcement on a cracked fender with Vice Grips. Who knew? Link to comment Share on other sites More sharing options...
Dandy Dave Posted April 10, 2020 Share Posted April 10, 2020 10 minutes ago, James Wright said: I didn't even know Vice Grips came with instructions. I would have never thought of holding the reinforcement on a cracked fender with Vice Grips. Who knew? Yeah. Just buy them off of the shelf today. They have not come with a box for many, many years. I have lot's of pairs that I use. Just did not want to beat up this vintage pair. Link to comment Share on other sites More sharing options...
Dandy Dave Posted April 10, 2020 Share Posted April 10, 2020 (edited) 26 minutes ago, oldford said: Model T magnet charger... Dave, I'll swap that for the model A engine... Frank I use it all the time to charge Magneto Magnets. It is here anytime need to charge a magnet Frank. Just bring them by. No charge. Pun intended. Dandy Dave! Edited April 10, 2020 by Dandy Dave (see edit history) Link to comment Share on other sites More sharing options...
Joe in Canada Posted April 10, 2020 Share Posted April 10, 2020 (edited) 15 hours ago, zipdang said: The bull I was tending to didn't like it one bit. That one is very different as the one we used had long handles like bolt cutters. I would not want to have my head anywhere near the bulls legs. I suspect those ones were used one time then went into an estate sale. Edited April 10, 2020 by Joe in Canada (see edit history) Link to comment Share on other sites More sharing options...
Isaiah Posted April 10, 2020 Share Posted April 10, 2020 The magnet charger will work on a lot of tractor and the old hit and miss engines. magneto That one is a nice one.. 1 Link to comment Share on other sites More sharing options...
zepher Posted April 10, 2020 Share Posted April 10, 2020 I have a pair of vice grips that look just like that pair from the box. They were handed down to me from my Dad. Use them all the time. Just used them a few days ago to repair a weed whacker. Maybe I should put them away and buy a modern pair. 🙂 Link to comment Share on other sites More sharing options...
mike6024 Posted April 10, 2020 Share Posted April 10, 2020 The Vice Grips with the "Easy Release" are a newer model, not an "antique." Real Vice Grips don't have that. 1 Link to comment Share on other sites More sharing options...
Bill Boudway Posted April 10, 2020 Share Posted April 10, 2020 Hi, My guess is a spark plug wrench. Any other guesses? Link to comment Share on other sites More sharing options...
Olsarge Posted April 10, 2020 Share Posted April 10, 2020 It's a yard stick. 1 2 Link to comment Share on other sites More sharing options...
zeke01 Posted April 10, 2020 Author Share Posted April 10, 2020 5 hours ago, Joe in Canada said: That one is very different as the one we used had long handles like bolt cutters. I would not want to have my head anywhere near the bulls legs. I suspect those ones were used one time then went into an estate sale. W.C. Fields once said, "There comes a time when you must grab the bull by the tail and face the situation". 1 Link to comment Share on other sites More sharing options...
Bush Mechanic Posted April 10, 2020 Share Posted April 10, 2020 1 hour ago, Bill Boudway said: Hi, My guess is a spark plug wrench. Any other guesses? This could work as a draw-bar spanner on a milling machine. Small hammer head on the handle, and a hanging hook. I doubt it's deep enough for a plug spanner. Most likely automotive, though. Link to comment Share on other sites More sharing options...
Isaiah Posted April 10, 2020 Share Posted April 10, 2020 lug bolt wrench for changing tires Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now