Brooklyn Beer Posted January 6, 2019 Share Posted January 6, 2019 If this is in the wrong place I apologize but it seems like a logical place to ask this question. Come Spring I am going to be looking at buying a late 20's - early 30's car and do not have a set make or type though am partial to Pontiac styling. Would like a driver car I can take out in the evenings that is solid, dependable, and not rare by any means. A car that is easy to grasp and learn on. I have not ever owned or worked on a car from this era. Have had a 1940 Ford 1.5 ton truck and do have a 1946 Dodge, 49 Roadmaster, 65 Fury III convertible, and 80 Z28 (HS car). My mechanical experience is not the best but surely not the worst. Not afraid to tackle any project with help and guidance (Thank you AACA forums) of experienced people when getting into something I have never worked on before. So here is what I what like to know as I continue to research what make and model of car would be best for me. (and eventually my nephews) Parts availability. What make is easy to get parts for when it breaks? Heard horror stories about this problem with some 20's cars Reliability. What make is noted for it's reliability with just normal scheduled maintenance in regards to around town driving? No touring, etc. Ability to work on. What make has good shop manuals and simplicity that an average auto hobbyist's garage tool inventory can easily work on. I look forward to folk's opinions and explanations as to why they feel as they do about this or that. Just what what and why that make compared to this make is better (or worse) in what standpoint. Have a few months before going shopping. Link to comment Share on other sites More sharing options...
John_Mereness Posted January 6, 2019 Share Posted January 6, 2019 1920's and 1930's cars are lovely, they generally are not high speed by today's standards - but all are generally torque-y, very easy to work on compared to today's standards of cars, and used parts are surprising available (but often more challenging to find and expect certain things to possibly not be available and need fabrication which often means more expense involved) - you need to join the club for whatever you get and reach out to people with the same/similar car, wood frame work tends to be hard for some people and certain cars are die-cast trim wonders and that can at times be a challenge, and related. The cars you listed are excellent primers for pretty much anything. I do recommend you start off with a driver or close to one to start - if you find something later that floats your boat more then sell X and move on. As to clubs - Join the AACA and Horseless Carriage Club for a year to start. Link to comment Share on other sites More sharing options...
28 Chrysler Posted January 6, 2019 Share Posted January 6, 2019 GM cars had used a lot of wood in those years. Fords and Ford parts are common but the inside of the car can be a bit on the small size. Dodge had all steel bodies since the early 1920s. The late 1920s the Dodge cars were 12 -14 inches wider than the Fords and with more leg room. 1 Link to comment Share on other sites More sharing options...
alsancle Posted January 6, 2019 Share Posted January 6, 2019 I second the idea of joining some clubs and getting a lay of the land. No need to rush in to anything. 1 Link to comment Share on other sites More sharing options...
keiser31 Posted January 6, 2019 Share Posted January 6, 2019 1 hour ago, 28 Chrysler said: GM cars had used a lot of wood in those years. Fords and Ford parts are common but the inside of the car can be a bit on the small size. Dodge had all steel bodies since the early 1920s. The late 1920s the Dodge cars were 12 -14 inches wider than the Fords and with more leg room. Yep. That's my 1931 Dodge Brothers coupe on the right. I had a Model A and did not fit in it very well. I am 5'-7" tall. My DB has LOADS of room for a bigger guy. 1 Link to comment Share on other sites More sharing options...
mercer09 Posted January 6, 2019 Share Posted January 6, 2019 parts availability, ease of maintenance and easy resale????????????? Model A ford. 5 Link to comment Share on other sites More sharing options...
Steve_Mack_CT Posted January 6, 2019 Share Posted January 6, 2019 All good advice above. I would check in with regular poster Matt Harwood who may still have a very reasonably priced Pontiac 2 door sedan ready to rock since you mentioned Pontiac. Quick pitch for a late T or better, imo, a Model A to get feel for the era. Always a ready market for an A if you decide its not for you, a bit more market risk with non Ford, non CCCA cars I think. 2 Link to comment Share on other sites More sharing options...
Brooklyn Beer Posted January 6, 2019 Author Share Posted January 6, 2019 (edited) 2 hours ago, keiser31 said: Yep. That's my 1931 Dodge Brothers coupe on the right. I had a Model A and did not fit in it very well. I am 5'-7" tall. My DB has LOADS of room for a bigger guy. Yes, I am 6 ft so room needs to be considered. I also like the idea of all steel as opposed to wood. That also needs to be considered as I live in TX and times humidity can get quite low for weeks on end. How would that affect the wood structure as well as wood wheels? Reading that Dodge changed to a 6 cylinder in 1929 (?). From a reliability and workmanship standpoint what is considered the best year in Dodge Brothers? Say from 1927 to 1932. I know these are only personal opinions. I will look into a Dodge Brothers club. Just an FYI on the size of people in the 30's yes they were smaller. Even before depression times malnourished them. I do WW 2 living history and the average soldier going into WW 2 weighed about 155 pounds, stood 5-6, and wore a size 36 suit. Based on uniform allotments to the QM. Edited January 6, 2019 by Brooklyn Beer spelling (see edit history) 1 Link to comment Share on other sites More sharing options...
Brooklyn Beer Posted January 6, 2019 Author Share Posted January 6, 2019 23 minutes ago, mercer09 said: parts availability, ease of maintenance and easy resale????????????? Model A ford. Thank you. I see Model A's listed everywhere and with prices every direction ! will follow the market trend. Seems a model A is available for every budget. Link to comment Share on other sites More sharing options...
John_Mereness Posted January 6, 2019 Share Posted January 6, 2019 Here is some fun: 4 Link to comment Share on other sites More sharing options...
John_S_in_Penna Posted January 6, 2019 Share Posted January 6, 2019 (edited) 6 hours ago, Brooklyn Beer said: ... I am going to be looking at buying a late 20's - early 30's car and do not have a set make or type though am partial to Pontiac styling. The typical closed car from that era can be quite affordable. Cars 1916 to 1927 or 1928 are even more affordable, since they have even less demand, and many of their owners are older. Some cars of the years you note are considered to have styling so beautiful that it wasn't surpassed for several decades. Matt Harwood is a collector-car dealer and AACA member who frequents this forum. He's knowledgeable about antique cars. And, as Steve Mack noted above, he has a 1929 Pontiac 2-door sedan for sale that you might like to look at: http://www.harwoodmotors.com/vehicles/inventory_details.php?id=911 Edited January 6, 2019 by John_S_in_Penna (see edit history) 3 Link to comment Share on other sites More sharing options...
mercer09 Posted January 6, 2019 Share Posted January 6, 2019 also if you go on the Ford Barn- you will have all of the help you will ever need......... 1 Link to comment Share on other sites More sharing options...
Steve_Mack_CT Posted January 6, 2019 Share Posted January 6, 2019 Yes, the Model A market is all over the place but their is order if one takes the time to research. Fine point cars using NOS parts and little or no repro stuff, rare bodystyles like the A400 or two door phaeton will command a premium. Many newer, older restorations, projects and the occasional original show up for much less. As Mercer says, Fordbarn is a great resource. At 5 foot, 9 inches, 230 lbs i could stand to lose a few but fit in my 30 roadster just fine. 28, 29s are generally tighter and tudors have adjustible seats. Little wood in tudors, roadsters, lots in sedans. 1 Link to comment Share on other sites More sharing options...
commander Dave Posted January 7, 2019 Share Posted January 7, 2019 Consider a Studebaker; Pretty reliable and great club to work with. Some of their cars were a little bigger than Ford or Chevys of that era. Yes, I am biased cause I have owned many Studes. but only have one now. A 1927 Studebaker Commander Sport Roadster. Now, don't the rest of you guys get me for plugging my preference. There a lot of good Brands out there. Respectfully, Commander Dave 1 Link to comment Share on other sites More sharing options...
Brooklyn Beer Posted January 7, 2019 Author Share Posted January 7, 2019 I have looked at Studes and like the history with them as much as say a Packard. Plus just a different car then is normally seen. So I am tossing this Hemmings ad out there for no particular reason just to get your opinion on what I should be looking for with a studebaker. What are some of the critical area's common to problems etc. https://www.hemmings.com/classifieds/cars-for-sale/studebaker/rockne/2077698.html Link to comment Share on other sites More sharing options...
Joe in Canada Posted January 7, 2019 Share Posted January 7, 2019 You have to consider what your plans are for a car touring or showing. A late teens or early 20s car have limited events. Too new pre 1916 for HCCA and two slow for other events plus reliability. If you want to tour you have to consider a source for parts. Or for show an expensive restoration that you will never recoup in that vintage era. I for myself would go for a Ford A for a first earlier car as there are many eligible events, great driving, easy for parts and an all fun car to drive. If you have a problem with an A on tour there is always several experts around on As that would be glad to help you out. Then after you got your feet wet the A is an easier car to part with if you choose a different direction. And yes as above Mat Hargrove would be the fellow to set you in an early car. Besides you would be able to come to Kingston Ont. for the AACA National Vintage tour Aud. 4 to 9. Link to comment Share on other sites More sharing options...
Brooklyn Beer Posted January 7, 2019 Author Share Posted January 7, 2019 Touring, showing, etc is basically a local thing for me. As much as I would like too, traveling distances require taking the dog with me so I tend to stick less then 2 hours drive. I have the ability to trailer so no big deal. I doubt I would ever go to a show for points, judging, etc. Way out of my league. Really looking for a car to drive 5 miles into town a couple times a week for errands and then the occasional local show and shine. 1 Link to comment Share on other sites More sharing options...
Guest Posted January 7, 2019 Share Posted January 7, 2019 10 hours ago, Steve_Mack_CT said: I would check in with regular poster Matt Harwood who may still have a very reasonably priced Pontiac 2 door sedan ready to rock since you mentioned Pontiac. This looks to be a very good car. My 30 Pontiac is basically the same car and it has given me 59 years for 400,000+ miles after my Grandfather put 99,000 miles on it in 29 years. I have been in every state west of the Mississippi. Only had to be towed home once. The pressure plate fell apart the day after I had been pulling stumps with the car. 26-28 Pontiacs are better than the same year Ford or Chev but are not nearly as good as 29 and up. 3 hours ago, commander Dave said: Consider a Studebaker; Pretty reliable and great club to work with. Some of their cars were a little bigger than Ford or Chevys of that era. I had a 26 Studebaker, a much superior car to the Pontiac but when children arrived sentiment won out over practical. Link to comment Share on other sites More sharing options...
ply33 Posted January 7, 2019 Share Posted January 7, 2019 From the advent of the automobile until maybe the mid-1930s there was continuous and rapid technological changes made to cars. A bit like computer or mobile phones today: A couple of years difference in design can make a huge difference product. And like now with mobile phones, the lower priced lines generally picked up features and engineering a little after the high end lines. All this to say that the difference between a late 1920s car and an early 1930s car can be considerable and for any given year the higher priced makes were more likely to be a more advanced or refined vehicle. You've had the Model A Ford suggested. And it has lots of things going for it, most notably a huge supplier base for parts. I suspect that early Chevrolet suppliers exist too that may have a large range of reproduction parts. But the Model A has a steel body, etc. The further you go from Ford and Chevy the fewer reproduction parts you'll easily find, so the more the need for joining a marque specific club to help find that elusive widget you need. On the topic of reliability, I notice you have a 46 Dodge. By 1933 Chrysler had come up with a pretty decent mechanical design and the running gear in a Dodge from 1933 is strikingly similar to that in your '46. Four wheel Lockheed hydraulic brakes and the same basic engine with full pressure feed lubrication, aluminum pistons, etc. In fact, other than the head it uses the same engine gasket set as your '46. I find that most tune-up/wear parts I need for my '33 Plymouth I can get from my local auto supply store. They might have to order them from the local warehouse, but I can usually get what I need in a day or so. So you might consider a 1933 or up Dodge. Unfortunately body and trim parts will be much more difficult to find than for a Model A Ford so you need to keep that in mind when looking at cars. 1 Link to comment Share on other sites More sharing options...
hidden_hunter Posted January 7, 2019 Share Posted January 7, 2019 One thing that’s not mentioned often is that quite often these cars have ideas/approaches that didn’t pan out in the long term which can make things a bit foreign. e.g I have a 1922 Cadillac that has fork and blade conrods which weren’t widely used Link to comment Share on other sites More sharing options...
Curti Posted January 7, 2019 Share Posted January 7, 2019 21 hours ago, John_Mereness said: 1920's and 1930's cars are lovely, they generally are not high speed by today's standards - but all are generally torque-y, very easy to work on compared to today's standards of cars, and used parts are surprising available (but often more challenging to find and expect certain things to possibly not be available and need fabrication which often means more expense involved) - you need to join the club for whatever you get and reach out to people with the same/similar car, wood frame work tends to be hard for some people and certain cars are die-cast trim wonders and that can at times be a challenge, and related. The cars you listed are excellent primers for pretty much anything. I do recommend you start off with a driver or close to one to start - if you find something later that floats your boat more then sell X and move on. As to clubs - Join the AACA and Horseless Carriage Club for a year to start. John, I would have suggested the very car you are restoring. Parts availability , great club, drive all day at 60-70 mph. Link to comment Share on other sites More sharing options...
Modeleh Posted January 7, 2019 Share Posted January 7, 2019 Of course I will endorse the sentiments of those that have suggested the Model A, but I do agree that Dodge made a very fine automobile. A marque not mentioned yet that I feel doesn’t get the recognition is Nash. I think you get a pretty good bang for the buck there, they were a well made car in many ways ahead of the Fords but they just don’t command the same prices because the hot rod crowd has driven up the value of 30s Ford bodies. 1 Link to comment Share on other sites More sharing options...
Brooklyn Beer Posted January 8, 2019 Author Share Posted January 8, 2019 I started skimming through classifieds just to look at base line pricing VS car quality. Has there not been a 24-28 ford that has not been hot rodded??? There is no way the market could support that many to buyers. I went on to look at Studebaker and Dodge Brothers and oddly those early-mid 20's open touring cars started looking very interesting indeed, Ford included. But I have to ask. What is it based on mechanical' s that make the Studebaker VS the Ford VS the Nash VS the Dodge different. High points VS Low points Link to comment Share on other sites More sharing options...
John_S_in_Penna Posted January 8, 2019 Share Posted January 8, 2019 5 minutes ago, Brooklyn Beer said: What is it based on mechanical' s that make the Studebaker VS the Ford VS the Nash VS the Dodge different? I'll let others delve into specifics, Brooklyn, but from old automotive accounts I've read, there was a MARKED difference in that era between low-priced, medium-priced, and high-priced cars. Today, you can buy a Honda Civic or a high-line Mercedes-Benz, and both will be competent and comfortable to take you on a trip across the country. In the old days, comfort, smoothness, and reliability were very different between, for instance, a Chevrolet and a Pierce-Arrow. One writer 100 years ago explained it as such: You wouldn't expect a small boat to do the things that an ocean-going yacht would do. Even so, you shouldn't expect a small runabout car, to be used for errands around town or driving to work, to tour the continent as a large car would do. Those vast differences between grades of cars were reduced over many decades, but even a 1971 Chevrolet Vega would be louder, harsher, and less comfortable than a Chevrolet Caprice. So, even the difference between a Ford and a Dodge or Buick from your years of interest should be noticeable to you. 2 Link to comment Share on other sites More sharing options...
babychadwick Posted January 8, 2019 Share Posted January 8, 2019 Are you a person who changes your own oil or takes it to a shop? When you need work done do you think more about labor cost or parts? If you are mechanical anything is possible, if you rely on others money makes anything possible. Knowing where you are will help determine the best car for you Link to comment Share on other sites More sharing options...
maok Posted January 8, 2019 Share Posted January 8, 2019 (edited) If you are looking for a more robust build and mechnical quality example then don't go for a Ford or Chev from the '20's. However, like others have mentioned, parts availability is easiest for the Fords by a long way, and very cheap too. Regarding hotrods, try finding a non hotrodded Ford model B ('32 onwards), I have never seen an original one here in Australia. Edited January 8, 2019 by maok spelling (see edit history) Link to comment Share on other sites More sharing options...
cahartley Posted January 8, 2019 Share Posted January 8, 2019 You can sink way more than you bargained for into a Model A too....... There is a lot of wood in the Model A. If the top is not in GREAT shape the chances are the underlying wood isn't either. That's a common thing to look for in most 20's and earlyish 30's cars and no part of doing the fixing is easy, pleasant or cheap. 1 Link to comment Share on other sites More sharing options...
Brooklyn Beer Posted January 8, 2019 Author Share Posted January 8, 2019 Lots of good stuff. Keep it coming. Looking at the price differences between Studebaker, Buick VS Ford, Dodge, Chevy, just what is it that made (make) then such a different car and upscale model? Was it just creature comforts or a big difference in mechanicals? I have read good info on how Packards were assembled like a Swiss watch. What made Buick and Studebaker stand a step taller then lower priced models? Link to comment Share on other sites More sharing options...
mercer09 Posted January 8, 2019 Share Posted January 8, 2019 There is a lot of wood in the Model A. BUT APPARENTLY FAR LESS THEN IN CHEVIES AND OTHER MAKES. i BOUGHT A 31 CHEVY ROADSTER AND HAD A HELL OF A TIME GETTING PARTS. mOST CHEVIES WERE SCRAPPED BECAUSE OF ALL WOOD BODIES. NO SO WITH THE FORDS...........WHY SO MANY ARE WITH US TODAY! Link to comment Share on other sites More sharing options...
alsancle Posted January 8, 2019 Share Posted January 8, 2019 You are going to get a really wide variety of opinions considering the audience. My opinion (besides the advice I already gave for joining a bunch of clubs) is to sit back and wait for the best 28-32 car that happens to fall in to your lap over the next 18 months. What that car is depends on your budget. If you have 10k to spend, then the low to mid priced suggestions make sense. If you can get up in the 20k range you might be able to find a nice car among the lower end of the big Classics. But has been stated many times on the forum, you can have as much fun in a Model T as a Model J, just depends on what floats your boat. 2 Link to comment Share on other sites More sharing options...
TexRiv_63 Posted January 8, 2019 Share Posted January 8, 2019 I am far from an authority on prewar cars but I was fortunate enough to own three "big Classics" - a 1928 Pierce-Arrow model 81, a 1932 Cadillac 370B V-12, and a 1934 Packard model 1100. My overall impression was that cars made a light year shift in technological advancement in the six years between 1928 and 1934. My Pierce was considered state of the art in '28 but the driving experience seemed archaic compared to the later cars, with the Packard feeling very modern in comparison. Keep this in mind and get real driving experience in the cars you add to your list before buying. My only other comment is that there are many bargain priced prewar cars out there right now and it is a good time to buy as long as you have your eyes open to potential difficulties regarding parts and service availability. Good luck! 1 Link to comment Share on other sites More sharing options...
tomcarnut Posted January 8, 2019 Share Posted January 8, 2019 A Ford is the best bet as far parts availablity, less body wood to rot, Club help etc. Model A’s have four wheel brakes and will do 45 easy and maybe 50-55 with an overdrive. Early v8 Fords are an option too but a little more pricey than and an A. Non Fords of this era have few parts being made. You can get just about anything for an A or v8 Ford in a day or so vs a longer search for non Ford parts. Link to comment Share on other sites More sharing options...
John_Mereness Posted January 9, 2019 Share Posted January 9, 2019 On 1/7/2019 at 8:39 AM, Curti said: John, I would have suggested the very car you are restoring. Parts availability , great club, drive all day at 60-70 mph. Yes, I generally recommend an Auburn 1926 through 1936 - great drivability no matter with most any year you get (all be it 34-36 is a great improvement over earlier series cars), wonderful club, solid place to park your money, good parts availability (especially for the 34-36 cars), and the list goes on and on. I generally have no fear with 1928-1935 Ford cars as well (a couple of T's around here too, but just depends on what you want to achieve via drivability - we live right in the thick of things in town and an A to V-8 is a better choice). Sidnote: I like the more traditional chrome grill of a 35 Link to comment Share on other sites More sharing options...
Brooklyn Beer Posted January 9, 2019 Author Share Posted January 9, 2019 13 hours ago, alsancle said: You are going to get a really wide variety of opinions considering the audience. My opinion (besides the advice I already gave for joining a bunch of clubs) is to sit back and wait for the best 28-32 car that happens to fall in to your lap over the next 18 months. What that car is depends on your budget. If you have 10k to spend, then the low to mid priced suggestions make sense. If you can get up in the 20k range you might be able to find a nice car among the lower end of the big Classics. But has been stated many times on the forum, you can have as much fun in a Model T as a Model J, just depends on what floats your boat. April I am looking at a 20-22k budget for a car. Why I am doing my homework now. Not locked into any car in general. Just would like pre 32. When did mechanical fuel pumps come in? I have also see a few articles on people putting overdrive in model A's which seems interesting Link to comment Share on other sites More sharing options...
Brooklyn Beer Posted January 9, 2019 Author Share Posted January 9, 2019 Just throwing this out there as this caught my eye. In this price range what jumps out at you both good and bad https://www.hemmings.com/classifieds/cars-for-sale/ford/model-a/2185956.html Link to comment Share on other sites More sharing options...
chistech Posted January 9, 2019 Share Posted January 9, 2019 (edited) " Would like a driver car I can take out in the evenings that is solid, dependable, and not rare by any means. A car that is easy to grasp and learn on." What I get from this question is the OP is not looking for a car needing much restoration work, but if it needs some mechanical upkeep, it should be basic and easy enough to work on. Not rare would mean parts should be readily available and the OP actually states that as another criteria later in the post. What amazes me is all the negative comments about wood framed bodies and parts availability for Chevy. If the OP purchases a "SOLID" car as he stated he is looking for, wood won't be an issue. Today, we never put our cars through the weather that they were put through when they were new. There are plenty of wood body cars, with excellent condition wood, out there in the same price range as an A and some T's that are in great shape and actually, have a much more "solid" feel and sound to them than a steel bodied car plus better HP and drivability. Close a door on a 32' Chevy and a 32' Ford and you'll know what I mean. Drive a Ford A or T all day at 35-40mph. Drive a 31-32 chevy at 45-50 all day with more power and better brakes. Kind of a no brainer. If someone buys a good solid wood bodied car, they will not have any more issues with it than those without the wood. The OP states a $20-$22K budget. I can tell you a very nice, reliable, completely solid, wood framed car can be purchased. That kind of money would buy you a very nice rumble seat coupe and virtually any restored sedan. I restore different brands of Fisher bodied cars. Great driving and super easy to work on mechanically. I do woodwork but again, I restore them and once they leave my shop, I'm confident the owner will never see a wood issue in his lifetime. To try and scare someone away from a wood bodied car with all kinds of horror stories or lack of parts availability is not proper advice based on the OP's original question and his budget. To inform him, if looking at a wood framed bodied car, to make sure the wood is solid and if he's not sure, to have someone experienced look at it for him, would be proper advice. As far as original and aftermarket parts for Chevy, 330,000 31' chevys were made and another ton of them in 32', both years outselling Ford. Yes, there are a lot more Fords on the road because of the steel bodies, but there's still a ton of original parts out there from the chevys that aren't on the road. Aftermarket parts are also very plentiful for the 29 and up Chevys. Edited January 9, 2019 by chistech (see edit history) 3 Link to comment Share on other sites More sharing options...
Steve_Mack_CT Posted January 9, 2019 Share Posted January 9, 2019 (edited) On the A phaeton, nice enough car, top is incorrect but better looking than the correct black cobra grain top. An example of whsts typically seen in terms of creative license but likely not an issue. If you want a pre 32, easy to maintain, drive and resell and can go low 20s you can get an A in the bodystyle of your choice likely with a touring engine (insert vs. Babbit bearings, a little more hp) and poss od set up. These generally help vs hurt value in all but the fine point cars, and are usually the quickest to sell. Join MARC and the monthly is really high quality, always a few good cars availble in classified section.. Edited January 9, 2019 by Steve_Mack_CT (see edit history) 1 Link to comment Share on other sites More sharing options...
md murray Posted January 9, 2019 Share Posted January 9, 2019 -if you don't mind a closed car how bout that nice honest looking 1930 Cadillac for sale here in AACA forums? obviously upkeep wont be as thrifty as a little ford but what a value! 1 Link to comment Share on other sites More sharing options...
tomcarnut Posted January 9, 2019 Share Posted January 9, 2019 11 hours ago, Brooklyn Beer said: Just throwing this out there as this caught my eye. In this price range what jumps out at you both good and bad https://www.hemmings.com/classifieds/cars-for-sale/ford/model-a/2185956.html I am not an A expert but have lot of friends with them. Others will chime in on what to look for in terms of correctness. The Mitchell Tranny that comes with it could be a nice addition and I believe adds overdrive that pushes the cruising speed up a bit and no double clutching and you could keep up with those 31-32 Chevies at least on flat ground. I have one friend with one and he likes it. I do not know the cost of a Mitchell but they are not cheap. Tom Muth Cincinnati, Ohio 1 Link to comment Share on other sites More sharing options...
Bloo Posted January 9, 2019 Share Posted January 9, 2019 And with that I think I should point out Mitchell makes 2 different types of product for the Model A. The first is an Overdrive that goes in the torque tube. This is not a planetary deal, it is an auxillary (second) transmission with 2 speeds, direct and overdrive. It is more comparable to a Warford for a model T, except that it has helical gears (much quieter) and is fully synchronized!. The second thing Mitchell makes is a set of fully synchronized gears for the model A transmission. With this, the model A is no longer a crashbox and basically anyone can drive it. It is still 1:1 direct drive in high gear like a stock model A. If you have enough money you could do both!. If it were me I would go for the Overdrive before I would go for the fancy transmission gears. A cruising gear is more important to me. I can shift a crashbox. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now