riv2x4 Posted February 20, 2020 Share Posted February 20, 2020 No part numbers but believed to be large car convertible early 6o's. Bought for a long gone 64 Electra conv. Not sure if they were correct for it or not. Shipping cost from 60048 and it's yours. Link to comment Share on other sites More sharing options...
riv2x4 Posted February 20, 2020 Share Posted February 20, 2020 64 Electra tail panel. No lock, a few pits. Bought for a long gone 64 Electra conv. Shipping cost from 60048 and it's yours. 1 Link to comment Share on other sites More sharing options...
Matt Harwood Posted February 20, 2020 Share Posted February 20, 2020 ALL of those Ford parts I mentioned are still available. Not one person has shown up to help themselves to any of those parts, even for free. Not even a complete engine. Maybe scrap is all they're worth? Link to comment Share on other sites More sharing options...
auburnseeker Posted February 21, 2020 Share Posted February 21, 2020 Don't feel bad Matt. I offered all those 37 Buick parts and no takers. I even produced a very good nose molding with badge for a guy needing one and he never responded. I didn't say it was free as crating for shipping would be a pain in the Butt, but hey if he walked up it would be his. I guess even though he had been looking for a year and another member said grab it as it was the best they had ever seen he didn't really need it. 😞 Still tripping over it on the office floor. Time to head back o the loft I guess. 2 Link to comment Share on other sites More sharing options...
psychostang Posted February 21, 2020 Share Posted February 21, 2020 On 3/19/2019 at 9:29 PM, psychostang said: I have a Gran Sport plate for the glove box door on a 1965 Buick Riviera. The two studs are broken off, and it could use a cleaning. If anyone is interested, I'll pay it forward for shipping cost. This is still available if anyone wants if mail cost! 🙂 1 Link to comment Share on other sites More sharing options...
NC-car-guy Posted February 23, 2020 Share Posted February 23, 2020 Early 60s Rochester with stuck secondaries. Needs full rebuild some new gaskets included. Pay shipping and its yours! 1 Link to comment Share on other sites More sharing options...
39BuickEight Posted April 18, 2020 Share Posted April 18, 2020 (edited) 3 (three) 16” 1939 Buick Special wheels They are rough, but they aren’t beyond repair by any means. I used them during my restoration when moving the car around. 2 tires are 245’s off a 2003 Silverado and the other is an old, old, old, old Firestone. They hold air for a few days at a time. Free pickup at my place in Central Kentucky. Edited April 18, 2020 by 39BuickEight (see edit history) 2 Link to comment Share on other sites More sharing options...
Carbuff2 Posted April 30, 2020 Share Posted April 30, 2020 would like the riviera gran sport glove box trim, still available? send info an i will send shipping fees. thanks paul Link to comment Share on other sites More sharing options...
psychostang Posted May 2, 2020 Share Posted May 2, 2020 Paul: Please pm me your address, and I'll get it out ASAP. Link to comment Share on other sites More sharing options...
Rusty Heaps Posted May 18, 2020 Share Posted May 18, 2020 (edited) Your choice, ‘51-‘52 big Buick gauge oil and temp clipped, ‘53 Special clock or “Buick Eight” filler . Free, you pay for the travel. Edited May 18, 2020 by Rusty Heaps No photo (see edit history) 4 Link to comment Share on other sites More sharing options...
Aaron65 Posted May 19, 2020 Share Posted May 19, 2020 I sent a PM about the clock. Link to comment Share on other sites More sharing options...
Rusty Heaps Posted May 21, 2020 Share Posted May 21, 2020 On 5/19/2020 at 10:38 AM, Aaron65 said: I sent a PM about the clock. Clock is on the way. Any takers on the Special clock delete filler or the other gauge? 1 Link to comment Share on other sites More sharing options...
NC-car-guy Posted July 15, 2020 Share Posted July 15, 2020 (edited) On 2/9/2020 at 6:05 PM, NC-car-guy said: Rear glass for a small body 4 door sedan. Should fit 54/55/56. No cracks only a tiny bit of fog at the bottom (hidden by the seal).Must pick up as building a crate costs me too much. FREE. Still available (3/22/21). I still have this. I have a windshield too that I'm.pretty sure is small body 4dr sedan. Tired of tripping over these... Edited March 24, 2021 by NC-car-guy (see edit history) 2 Link to comment Share on other sites More sharing options...
NC-car-guy Posted August 18, 2020 Share Posted August 18, 2020 (edited) Going to scrap this weekend (3/27/21) Free seat from a 56 century 2dr HT. Edited March 24, 2021 by NC-car-guy (see edit history) 1 Link to comment Share on other sites More sharing options...
Matt Harwood Posted August 18, 2020 Share Posted August 18, 2020 On 3/18/2019 at 9:04 PM, Matt Harwood said: Awesome thread, Mr. Earl! I have a storage room full of Model A and V8 Ford parts that I'm not using and trying to turn them into money is just going to take too much time. If you come to my shop, I will give you any two parts of your choice, up to and including a complete flathead V8 engine (I have two long blocks and I'm going to keep the one that you don't take). I'm not going to try to identify everything or ship it, but if you want some parts that probably have value, come and look and you're welcome to take any two things you want. Most of the small parts are 1935 Ford, but big stuff has wider applications. I believe the exhaust manifolds are Chrysler 340 but might be small block Chevy, I don't remember anymore. That's the deal. I'm not boxing and shipping anything, but it's free if you can come get it. You can also hang out and look at cars all day if you'd like. Here's just some of the stuff: Wow, I almost forgot about this thread. I gave pretty much all that stuff to one guy because he was the only one to show up with a truck and ask for it. I kept the two V8 engines and the stainless gas tank, but I probably gave away 4000 pounds of parts--his truck was FULL. Glad they went to a new home with someone who will be able to benefit from them more than I could. 8 Link to comment Share on other sites More sharing options...
NC-car-guy Posted August 21, 2020 Share Posted August 21, 2020 (edited) CLAIMED. 55 service manual. Well worn but seems to have all its pages. Free. You pay shipping. Media mail is cheap. Edited March 24, 2021 by NC-car-guy (see edit history) 2 Link to comment Share on other sites More sharing options...
moose50 Posted August 28, 2020 Share Posted August 28, 2020 Hi, I'm a Dodge Brothers guy, but I came across this Buick axle for free and couldn't pass it up. Anybody out there need any/all of it? Not sure of the year, probably mid 20's. Seems like it was for 21" wheels. It was some sort of trailer or cart and the spindles are brazed to the axle, but should be able to heat and melt the braze away if you want. Or you could just display it like I will until somebody wants it. Bearings are all there and in great shape. No brake parts except the backing plates. Springs are in good shape. I'm in Massachusetts, feel free to message or email me. Moose 2 1 Link to comment Share on other sites More sharing options...
sleeve-valve Posted October 31, 2020 Share Posted October 31, 2020 (edited) Update: These books have been taken and are no longer available. Lot of Early 1920's Books: Everyman's Guide to Motor Efficiency 1922, Questions and Answers relating to Modern Automobile Design and Construction Driving and Repair Victor Page 1921, Gasoline Automobiles Moyer 1921, Brookes Automobile Handbook 1921, Hallock's Starting and Lighting Systems of Automobiles 1921, Audels Automobile Guide 1922, Gasoline Automobiles 1922 Floyd Clymer reprint, Motor Vehicle laws 1921 CT, Motor Vehicle Laws 1921 RI. All free shipped as one lot via USPS Media Mail. Edited October 31, 2020 by sleeve-valve Books taken (see edit history) 3 Link to comment Share on other sites More sharing options...
kingrudy Posted February 26, 2021 Share Posted February 26, 2021 I might be mistaken, but wasn't this thread posted at the top of the "Buick for Sale" forum? Just read a thread on the General Discussion Forum that suggested starting this under General Discussion. I have a couple of parts that I want to list and I wanted to post it in here. Link to comment Share on other sites More sharing options...
1937McBuick Posted February 27, 2021 Share Posted February 27, 2021 On 2/20/2020 at 6:31 PM, auburnseeker said: Don't feel bad Matt. I offered all those 37 Buick parts and no takers. I even produced a very good nose molding with badge for a guy needing one and he never responded. I didn't say it was free as crating for shipping would be a pain in the Butt, but hey if he walked up it would be his. I guess even though he had been looking for a year and another member said grab it as it was the best they had ever seen he didn't really need it. 😞 Still tripping over it on the office floor. Time to head back o the loft I guess. Auburnseeker, if I was within a reasonable distance to you I would have taken it from you. Has the demand for parts for a certain range of years dried up? Not much in Canada. Some stuff is just so hard to ship. Heavy or bulky and light. I shipped a couple of 37 Buick nose trims from Regina Sask Canada to Pacoima California for straightening and polishing. The box was a flat screen tv box cut down to 48X19X9 inches. I used some of the Styrofoam to maintain the boxes strength and integrity. It worked well. It only weighed about 10 lbs. But was pricey. ps. Is the 37 and 38 nose trims the same? 1 Link to comment Share on other sites More sharing options...
auburnseeker Posted February 27, 2021 Share Posted February 27, 2021 11 hours ago, 1937McBuick said: Auburnseeker, if I was within a reasonable distance to you I would have taken it from you. Has the demand for parts for a certain range of years dried up? Not much in Canada. Some stuff is just so hard to ship. Heavy or bulky and light. I shipped a couple of 37 Buick nose trims from Regina Sask Canada to Pacoima California for straightening and polishing. The box was a flat screen tv box cut down to 48X19X9 inches. I used some of the Styrofoam to maintain the boxes strength and integrity. It worked well. It only weighed about 10 lbs. But was pricey. ps. Is the 37 and 38 nose trims the same? I just got out of the parts business. Too much left over stuff that wasn't rare and cherry once I picked the lots over, which in many cases had been picked over atleast once before I got them. I'm not sure if 37 and 38 are interchangable. The shipping was the whole reason I got out of parts. All that big awkward stuff was a pain to ship and usually the shipping ate up most of the value of the part. Once I spent a 1/2 hour boxing it up, it just wasn't worrh selling that type of stuff anymore, and that was with stocking several different box sizes and tubes. My new business only requires about 5 different box sizes and usually that takes very little time to box everything up. The parts are still here if anyone wants them. Though I did dig out a pair of headlights and a trunk ornament assembly that I sold at our garage sale for someone's rat rod project. 1 Link to comment Share on other sites More sharing options...
Buick35 Posted February 28, 2021 Share Posted February 28, 2021 (edited) I have a distributor for a 35 forty series ,good drive gear.Minus the cap and vacuum canister. Just pay for shipping from Fl.32927. It's a 663E. Edited May 13, 2021 by Buick35 Add text (see edit history) 1 1 Link to comment Share on other sites More sharing options...
deac Posted February 28, 2021 Share Posted February 28, 2021 On 8/21/2020 at 3:41 PM, NC-car-guy said: 55 service manual. Well worn but seems to have all its pages. Free. You pay shipping. Media mail is cheap. I know this was posted in August of 2020 but I would like know if this manual is still available. If it is I will take it!! 2 Link to comment Share on other sites More sharing options...
deac Posted March 3, 2021 Share Posted March 3, 2021 Message for NC-CAR-Guy: I sent a private message your way. Please make sure to let me know the shipping costs of that manual. 1 Link to comment Share on other sites More sharing options...
neil morse Posted March 23, 2021 Share Posted March 23, 2021 I agree that this page should again be pinned at the top of the Buick Buy/Sell forum. As others have said, it's a bit hard to find now. I have three random items to offer to anyone who wants to pay the shipping from 94114. First, a '41 Steering wheel that someone might want to have recast. It is in good shape but for one cracked spoke. Next up, a '41 reproduction speedo face with the chrome/painted inner rim (not sure what to call this) included. The inner rim was repainted by me in an attempt to match the original colors (it is brown up to 50 mph when it turns RED to alert you to excessive speed!). I was going to use it when restoring my speedo, but at the last minute I found an NOS part online. It looks pretty good, but not perfect. Finally, a new gas pedal that I got from Bob's Automobilia. It was sold to fit my '41, but it did not fit. The angle of the bottom hinge is much greater than the '41 (i.e., it is canted more sharply to the right when installed). I think it fits a '39, but I'm not sure. Bob's would not take it back and give me a credit for the purchase price because they insisted that it could be "bent" to fit! (What a joke -- but that's a story for another day.) Anyhow, I would be happy to try to take some measurements if anyone is interested. So anyone interested in any of these items should just shoot me a PM. Happy motoring, Neil 3 1 Link to comment Share on other sites More sharing options...
neil morse Posted March 24, 2021 Share Posted March 24, 2021 Thank you, @Peter Gariepy, for pinning this topic back up on top. 2 Link to comment Share on other sites More sharing options...
neil morse Posted March 24, 2021 Share Posted March 24, 2021 The steering wheel has been claimed. Neil 2 Link to comment Share on other sites More sharing options...
NC-car-guy Posted March 24, 2021 Share Posted March 24, 2021 I went through and updated my posts. 3 Link to comment Share on other sites More sharing options...
Wildcatter Posted April 19, 2021 Share Posted April 19, 2021 '63 Wildcat hubcap - Just to keep it spinning and shining: If you need 1963 Wildcat hubcap, this one has bold and clear medallion that can be swapped out. Otherwise, slight imperfection in metal can be resolved with patience. Needs flat black paint touch up. Need cap or just filling out a cap collection, let's skip the hunt. Pay the routine shipping costs - agreed upon in advance. If you are in the Mid-Atlantic region, I'll drop it off or meet someplace. 3 Link to comment Share on other sites More sharing options...
kingrudy Posted June 4, 2021 Share Posted June 4, 2021 I am cleaning out the garage and letting go of some items that are not right for my car, but may be used by someone else. I have a horn button that is in really good shape. It appears to be correct for 1941, 1942 and some other years. Part number on the back is 1319406. It does has a few scratches near the opening on the back for the horn ring. Free to a good home and you pay shipping. Thanks, Mike Link to comment Share on other sites More sharing options...
kingrudy Posted June 4, 2021 Share Posted June 4, 2021 (edited) Still cleaning out the garage. I have a steering wheel, horn ring and button. I believe this is from an early 50's Buick. There is pitting on the horn button and the steering wheel is not perfect, but usable. I no one wants this, I will use it for garage art. Free to a good home if you pay the shipping. Thanks, GONE TO A NEW HOME! Mike Edited March 12, 2022 by kingrudy GONE TO A NEW HOME (see edit history) 1 Link to comment Share on other sites More sharing options...
kingrudy Posted June 5, 2021 Share Posted June 5, 2021 Also have the cowl to hood seal which fits a 1940 model 40 or 60. This is part # HS-40, made of rubber six feet long. I purchased this part five years ago, but it has always been in a temperature controlled environment. Free to a good home if you will pay the shipping from Asheville, NC 28803. Package has been opened, but never removed. Thanks, Mike 1 Link to comment Share on other sites More sharing options...
markewebb '39 Buick Team Posted September 16, 2021 Share Posted September 16, 2021 (edited) No longer available. Edited November 4, 2021 by markewebb '39 Buick Team no longer available (see edit history) 2 Link to comment Share on other sites More sharing options...
cxgvd Posted December 12, 2021 Share Posted December 12, 2021 I have six envelopes with a Diamond Tire promotion inside from a garage in NY, four are still sealed, uncirculated, from the appearance of the roadster pictured I'd say early 1920's. Free to a good Buick home, send me a message with your postal address. Merry Christmas, Gary 1 1 Link to comment Share on other sites More sharing options...
39BuickEight Posted December 12, 2021 Share Posted December 12, 2021 I have a very heavy large box of used 1939 Buick front end suspension parts from my old car-shocks, upper and lower arms, etc. All would need to be rebuilt and refinished for use, but its free to pick up at my home in Richmond, KY 1 1 Link to comment Share on other sites More sharing options...
Miguelg510 Posted February 9, 2022 Share Posted February 9, 2022 I love this thread man. I miss the days of paying for the car behind you's coffee order at starbucks, holding the door open for strangers just because, and the little things we used to do normally to be kind to one another. Seems like more of a distant memory in today's climate. I have really enjoyed being a newer member of AACA because I realized this is a collection of like minded men and women who enjoy car culture same as me and are just great humans to congregate with. Thumbs up guys. 4 Link to comment Share on other sites More sharing options...
Miguelg510 Posted February 9, 2022 Share Posted February 9, 2022 On 3/23/2021 at 3:20 PM, neil morse said: I agree that this page should again be pinned at the top of the Buick Buy/Sell forum. As others have said, it's a bit hard to find now. I have three random items to offer to anyone who wants to pay the shipping from 94114. First, a '41 Steering wheel that someone might want to have recast. It is in good shape but for one cracked spoke. Next up, a '41 reproduction speedo face with the chrome/painted inner rim (not sure what to call this) included. The inner rim was repainted by me in an attempt to match the original colors (it is brown up to 50 mph when it turns RED to alert you to excessive speed!). I was going to use it when restoring my speedo, but at the last minute I found an NOS part online. It looks pretty good, but not perfect. Finally, a new gas pedal that I got from Bob's Automobilia. It was sold to fit my '41, but it did not fit. The angle of the bottom hinge is much greater than the '41 (i.e., it is canted more sharply to the right when installed). I think it fits a '39, but I'm not sure. Bob's would not take it back and give me a credit for the purchase price because they insisted that it could be "bent" to fit! (What a joke -- but that's a story for another day.) Anyhow, I would be happy to try to take some measurements if anyone is interested. So anyone interested in any of these items should just shoot me a PM. Happy motoring, Neil Hey is the steering wheel and speedo insert still available?? Link to comment Share on other sites More sharing options...
neil morse Posted February 9, 2022 Share Posted February 9, 2022 58 minutes ago, Miguelg510 said: Hey is the steering wheel and speedo insert still available?? The steering wheel is gone, but the speedo insert is still available. Send me a PM with your address and I will send it to you. Link to comment Share on other sites More sharing options...
Miguelg510 Posted February 10, 2022 Share Posted February 10, 2022 On 12/1/2019 at 8:24 PM, jw1955buick said: ‘FREE 55 Buick body parts and bumpers A perfectly straight hood with surface rust for super/RM two doors for a special two door post model 48, drivers is very straight, passenger has large dent across the middle front and rear bumpers for spec/century with extra bullets plus a grill and two grill center cross bars all stuff is salvage yard quality, rust, dents all that also a glove box door for same models I’m in Tulsa Oklahoma, will not box up, pick up or make all arrangements I wish I had a completed 55 Buick in my driveway! Haha, what good looking cars from that era 👍🏽👍🏽👍🏽 Link to comment Share on other sites More sharing options...
neil morse Posted December 7, 2023 Share Posted December 7, 2023 I have some additional '41 items that I will happy to pass along to anyone who needs them. Three dashboard switch knobs (lights, defroster, and map light), and a rear passenger cigar lighter (fits in back of front seat in Super and Roadmaster -- not sure about Special or Century). Also @Peter Gariepy, I'm not sure why you unpinned this topic, but I think it helps people to find the right place to pass along free stuff if it's pinned. Just my $0.02. 5 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now