58L-Y8 Posted November 26, 2021 Share Posted November 26, 2021 For Sale: 1930 Lincoln 4dr Sedan - $21,500 - Vacaville, CA 1930 Lincoln - cars & trucks - by owner - vehicle automotive sale (craigslist.org) 1930 Lincoln 4 Door Sedan. Original inside and out. Complete and in good condition. Runs and drives well. Flathead V8 engine compression is less than half of what it should be but it still runs good considering. Purchased new in Sacramento. Third owner for the past 22 years. An enclosed trailer that can be purchased separately. odometer: 55666 Contact: (530) 2-one-9-eleven-2-five Copy and paste in your email: a2b949f0c25d3dc985ccfca02c246ef7@sale.craigslist.org I have no personal interest or stake in the eventual sale of this 1930 Lincoln 4dr Sedan. 3 Link to comment Share on other sites More sharing options...
suchan Posted November 26, 2021 Share Posted November 26, 2021 I like the ad and the car. At that price, it'd be tempting to just run it and hope for the best. I'm guessing a competent engine rebuild would be a multiple of the asking price? Link to comment Share on other sites More sharing options...
Steve_Mack_CT Posted November 26, 2021 Share Posted November 26, 2021 Well it is a Classic but the flat 8 is not super complicated. Fairly priced. I believe aluminum bodied (factory) Link to comment Share on other sites More sharing options...
edinmass Posted November 26, 2021 Share Posted November 26, 2021 4 minutes ago, Steve_Mack_CT said: Well it is a Classic but the flat 8 is not super complicated. Fairly priced. I believe aluminum bodied (factory) Easy fix......throw 1000 dollar bills at it till you pass out......five times. Nice car. And a seller that speaks the truth........impressive. 3 Link to comment Share on other sites More sharing options...
charlespetty Posted November 26, 2021 Share Posted November 26, 2021 (edited) Very complete original car. I went to see it earlier this year and it runs and drives very well despite the low compression and blow-by. Owner is very friendly and honest. Original paint and upholstery. New Michelin double rivet tires and powder coated wheels. Edited November 26, 2021 by charlespetty (see edit history) 3 2 Link to comment Share on other sites More sharing options...
edinmass Posted November 27, 2021 Share Posted November 27, 2021 (edited) The engine could probably be left in the car and a hone job with rings and valves would make it good as new. More time than money..........I did a similar overhaul on a 1931 when I was 14 years old without difficulty. Edited November 27, 2021 by edinmass (see edit history) 5 1 Link to comment Share on other sites More sharing options...
Guest Posted November 27, 2021 Share Posted November 27, 2021 Great looking car. Two questions: 1- Juice brakes or mechanical? 2- What is the diamond above the front license plate? Link to comment Share on other sites More sharing options...
charlespetty Posted November 27, 2021 Share Posted November 27, 2021 Very complete original car. I went to see it earlier this year and it runs and drives very well despite the low compression and blow-by. Owner is very friendly and honest. Original paint and upholstery. 1 Link to comment Share on other sites More sharing options...
charlespetty Posted November 27, 2021 Share Posted November 27, 2021 The diamond is a period AAA insurance enameled sign. Mechanical brakes for sure. 1 Link to comment Share on other sites More sharing options...
Guest Posted November 27, 2021 Share Posted November 27, 2021 Thanks Charles. Link to comment Share on other sites More sharing options...
TAKerry Posted November 27, 2021 Share Posted November 27, 2021 Again showing my ignorance of pre war cars, but that one seems pretty decent. Seems like a lot of car for not much more than model A money. Link to comment Share on other sites More sharing options...
edinmass Posted November 27, 2021 Share Posted November 27, 2021 2 minutes ago, TAKerry said: Again showing my ignorance of pre war cars, but that one seems pretty decent. Seems like a lot of car for not much more than model A money. Agreed, but you can fix a Model A for free compared to a Leland Lincoln. We won’t even discuss parts availability. 4 Link to comment Share on other sites More sharing options...
Steve_Mack_CT Posted November 28, 2021 Share Posted November 28, 2021 11 hours ago, edinmass said: Agreed, but you can fix a Model A for free compared to a Leland Lincoln. We won’t even discuss parts availability. The reason I have passed on a couple local cars that were pretty good, this one though, is nice enough I think to not worry about cosmetics, a big leg up if your not hung up on a show car. 3 Link to comment Share on other sites More sharing options...
ericmac Posted November 28, 2021 Share Posted November 28, 2021 Of all the cars I have seen posted here there has only been one other that made my heart beat faster than this car. I like it...a lot. 3 Link to comment Share on other sites More sharing options...
classiclines Posted September 9, 2022 Share Posted September 9, 2022 Not Mine - Same car - significant reduction in price - $12,500 https://sacramento.craigslist.org/cto/d/vacaville-1930-lincoln/7531607075.html pics in new ad may be slightly different than ones in this thread - same car license plate and contact phone number phone five30-21nine1125 Email - copy and paste into your email: 3598a5a581b63a119facfd01e7ba5c86@sale.craigslist.org 1 Link to comment Share on other sites More sharing options...
John Bloom Posted September 9, 2022 Share Posted September 9, 2022 That seems like a car that should be gone in a few days...... or a soon as someone serious can get to it. 1 Link to comment Share on other sites More sharing options...
Grimy Posted September 9, 2022 Share Posted September 9, 2022 I've seen that Lincoln many times at the annual Gatsby Sunday Afternoon at Oakland's Dunsmuir House (to occur again this Sunday) and have admired its originality. I don't know the owner and have not heard it run. 1 Link to comment Share on other sites More sharing options...
kar3516 Posted September 10, 2022 Share Posted September 10, 2022 Craigslist posting is deleted Link to comment Share on other sites More sharing options...
Leif in Calif Posted March 11, 2023 Share Posted March 11, 2023 New ad, now $19K. I wonder if they wouldn't take a few grand less to someone who promised a good home! https://sacramento.craigslist.org/cto/d/vacaville-1930-lincoln/7598100830.html 28ba5d0758cd367db72e407e608890d9@sale.craigslist.org 3 Link to comment Share on other sites More sharing options...
Dave Henderson Posted March 11, 2023 Share Posted March 11, 2023 On 11/27/2021 at 9:27 AM, edinmass said: Agreed, but you can fix a Model A for free compared to a Leland Lincoln. We won’t even discuss parts availability. Ed, Too much crown? Ford bought Leland Motor Co in 1922.... Link to comment Share on other sites More sharing options...
edinmass Posted March 11, 2023 Share Posted March 11, 2023 (edited) Unfortunately, I’m sober. I don’t get your question Dave. All the V-8 Lincolns are considered Leland cars. Edited March 11, 2023 by edinmass (see edit history) Link to comment Share on other sites More sharing options...
John Kelso Posted March 11, 2023 Share Posted March 11, 2023 (edited) You sure about that? I thought when Henry put his name on the radiator badge and Edsel supervised all the body designs it was no longer Leland, except for the fork and blade engine. Edited March 11, 2023 by JAK (see edit history) Link to comment Share on other sites More sharing options...
Fossil Posted March 11, 2023 Share Posted March 11, 2023 On 11/26/2021 at 4:39 PM, charlespetty said: I went to see it earlier this year and it runs and drives very well despite the low compression and blow-by. Somehow a little smoke coming out the back just seems to fit an original looking car from that era. 1 Link to comment Share on other sites More sharing options...
RVMC Posted March 11, 2023 Share Posted March 11, 2023 Nice looking car, but the seller has had it for sale for 3 years now, I find it amazing it's still for sale, especially at only $21k. Why is this car still available? If it didn't cost so much to transport it from the west coast to the east cost, I would buy it. Link to comment Share on other sites More sharing options...
TAKerry Posted March 11, 2023 Share Posted March 11, 2023 It does seem like a lot of car for the asking. Motor being low on compression is the deal killer I suppose. Link to comment Share on other sites More sharing options...
Terry Y Posted March 11, 2023 Share Posted March 11, 2023 3 hours ago, RVMC said: Nice looking car, but the seller has had it for sale for 3 years now, I find it amazing it's still for sale, especially at only $21k. Why is this car still available? If it didn't cost so much to transport it from the west coast to the east cost, I would buy it. Is it still being advertised by the original seller ? Or is this someone new selling the same car? Link to comment Share on other sites More sharing options...
Matt Harwood Posted March 12, 2023 Share Posted March 12, 2023 A hurt motor is scary to buyers. And even if it has 2/3 the cylinders of my V12 and a rebuild only costs 2/3 as much, it's still going to be more than the asking price. Link to comment Share on other sites More sharing options...
charlespetty Posted March 12, 2023 Share Posted March 12, 2023 6 hours ago, Fossil said: Somehow a little smoke coming out the back just seems to fit an original looking car from that era. That blow-by oily smoke was coming from the oil fill breather cap, not the exhaust so much. 1 Link to comment Share on other sites More sharing options...
Fossil Posted March 12, 2023 Share Posted March 12, 2023 46 minutes ago, charlespetty said: That blow-by oily smoke was coming from the oil fill breather cap, not the exhaust so much. Thank you and I understand that. The breather pipe being at one end of the car and the exhaust pipe the other end. The breather pipe adds aroma to the inside of the car and the tail pipe the outside. This reminds me of setting at an intersection waiting for the light to change on cold days and seeing the vapors rising up from under the cars. Not something you see much of anymore. 2 Link to comment Share on other sites More sharing options...
Leif in Calif Posted March 12, 2023 Share Posted March 12, 2023 I know these are totally unrelated to Ford's '32 V8 design and that they have fork and blade rods, but what makes them so daunting to rebuild? Link to comment Share on other sites More sharing options...
ericmac Posted March 12, 2023 Share Posted March 12, 2023 Looks like the ad was deleted. Link to comment Share on other sites More sharing options...
edinmass Posted March 12, 2023 Share Posted March 12, 2023 13 hours ago, JAK said: You sure about that? I thought when Henry put his name on the radiator badge and Edsel supervised all the body designs it was no longer Leland, except for the fork and blade engine. I can only respond to how the founders of the CCCA that I was around referred to them………any fork and blade was a Leland. The square boxes on wheels were certainly coming under that nomenclature. But guys like Pres Blake, Joe Joseph, Charlie Kerner, Bob Turnquist, John Wemple, and many others who taught me the ropes as a young kid all referred to the fork and blade cars as Leland Lincoln’s. Fact is many considered them as a pre WWI design, and the “first” good one as the “KB”. Personally, I really like the 1925-1928 specials that were done. Always though they Lincoln beans was under appreciated…….same as Pierce Arrow. Just my two cents. 4 Link to comment Share on other sites More sharing options...
alsancle Posted March 12, 2023 Share Posted March 12, 2023 This is a very attractive car. It tells you something (bad) if it can't find a quick home at 20k. 2 Link to comment Share on other sites More sharing options...
Dave Henderson Posted March 12, 2023 Share Posted March 12, 2023 21 hours ago, edinmass said: Unfortunately, I’m sober. I don’t get your question Dave. All the V-8 Lincolns are considered Leland cars. Ed, Yes, it was devilish of me to exclude "Leland" from Lincoln. After all, my high school year book epitaph started with "Devilish as can be". After acquisition by Ford, the corporate name was changed to LINCOLN MOTOR COMPANY Division of FORD MOTOR COMPANY, for whatever that's worth. A strange observation; Wicipedia states that after '30 the "L" designation was replaced by "K", even though the '31-'32 models were still flathead V8's and not the 12 cylinder models we associate with "K". A look at a prewar Victor gasket catalog corroborates this, showing K in the prefix of the head gasket for '31 and '32's. I have about 40 Lincoln service bulletins ranging from 1925 up into 1934 in their original string bound covers that I would like to make available for purchase byanyone more in need of them than I am. Any interest? Link to comment Share on other sites More sharing options...
edinmass Posted March 12, 2023 Share Posted March 12, 2023 Thanks for the offer......I only collect stuff that applies to my cars I have on hand........it was getting out of hand. I'm certain someone will want them. 1 Link to comment Share on other sites More sharing options...
RVMC Posted March 12, 2023 Share Posted March 12, 2023 16 hours ago, Terry Y said: Is it still being advertised by the original seller ? Or is this someone new selling the same car? Yes, the same person by the name of Roger. Link to comment Share on other sites More sharing options...
JACK M Posted March 12, 2023 Share Posted March 12, 2023 Is there a quick explanation of 'fork and blade rods'? Link to comment Share on other sites More sharing options...
alsancle Posted March 12, 2023 Share Posted March 12, 2023 23 minutes ago, JACK M said: Is there a quick explanation of 'fork and blade rods'? 2 2 Link to comment Share on other sites More sharing options...
JACK M Posted March 12, 2023 Share Posted March 12, 2023 (edited) Thank you, Is there a bearing on a bearing? Edited March 12, 2023 by JACK M (see edit history) Link to comment Share on other sites More sharing options...
58L-Y8 Posted March 12, 2023 Author Share Posted March 12, 2023 19 hours ago, Leif in Calif said: I know these are totally unrelated to Ford's '32 V8 design and that they have fork and blade rods, but what makes them so daunting to rebuild? I'll take run at this question: tight tolerance machining to allow century old build methods, virtually extinct spare parts, few willing or able to bear the cost or headache of such a project for the resulting car involved. Anything else? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now