Mikefit

I have a call in to them but said of today they have not called back maybe c19 has them close . Up

I need a good radiator for my Dodge Brothers touring car 1918 I would not mind if it needs boiled out and or minor repairs Mike

I need a good radiator for a 1918 Dodge B help. Mike

Do you still have the point sets and $$$$$ Mike

String was used to tie the gasket on the pan

1928 2 door Model A it needs right now New battery some time in the future (yrs) a new top all gravestone short block installed leaderless water pump turn lights that do not distract from the original look. Wind wings I owned the car for over 20 yrs some rust showing along a lower cowl area you have to look radiator stone shield Quail motor meter interior is very good as per original some spare parts most new tires are white walls and some age on them . Car has run on the Indianapolis race track and many two day road trips no problems The down side it's in northern Indiana not in Florida paint looks good two tone black and light brown. Original color combination there is a after market trunk and rack trunk is not to good the bottom was made of practical board and is not good but could be replaced thinking $8,500.00 Thanks. Mike.

I did mine in glossy. But I'm a wood boat nut

My money's on a plug up converter. Drop the exhaust pipette a short run it will be obvious

I have a friend that has a 4 post lift it's a commercial lift was in a Ford dealer ship we brought it to his home and installed it worked great few years he sold the home New owner wanted it out it was not part on the sale long story short it is how disassembled and in storage would be a very challenging to reassemble it be wood sell it what's it worth.

Could it be the ones swingers on the lamp the other on the door pillar?????

Looks somewhat like Ford's vv carburetor of the 60s

Cut a groove in the edge of a 2x4 deep enough to stand the plate up then you can rearrange them as needed attach the 2x4 to the wall

A few years ago I did 5 wire spoked wire Model A wheels and used brake fluid worked good ps I had access to a large amount of it took about 5 qts.

Log vmTom and Cindy Myers dba Myers Early Dodge 734 856 1207

I would 2nd Larry's motion there would be no strain on the patch or road salt get up there

Could it be a mole trap?????

Here's my thoughts; Fastened to the wood body/ floor boards you are a passenger in the body as it flying from the frame not good or you fastened to the frame you have the body flying off and it's trying to pull you off with it not good. Mike

L M = Lawn mower

Fort Wayne clutch 18002588243 in northeastern indiana

My pet peeve. Husband passed away neighbor comes over tells the wife he watched B J auction on TV ( so now he's a expert on car values) the car is worth xXxX$$$ and do not anyone talk you down.

I'm not real sure but. I think you had the rods reversed they should be paired up so that the rod has clearance on the radius on the crank ( at the cheek of the crank) just a thought. The rods should move some on the crank journal side to side. Hope this . Helps.

I guess I do not know what AACA stands for is it not Antique Car club ?? My thought any vehicle that car keep up in today's traffic is not an antique vehicle. Mike

Horn relay. H= horn. S= switch. ??????

Tubes may make the tires run warmer ???

I had the same problem some how over the years the cylinder shrunk and the key way close e d up some I used a small file and thinned the key used a magic marker on th side of the key to have a reference as where it was too thick and some3/1 oil it worked. B