Mikefit

VL. I love your sense of humor. You jest never fail to come up with some thing to keep my on the lookout for your next adventure. Mike

I guess I'm stupid. How can they issue a plate where there is a duplicate number out already the computer should confirm that number is not used. Also what difference would it make if it was a reproduced plate the state will get the same amount of money in Indiana you still will get a current plate it must be in the car but not on it what difference does it make if the color is not perfect match are they going to use a paint chip to determine if it a match ? The bottom line is $$$$$$$$$. No one working would know what colors for each year . Just my opinion. Mike

I thought it was a Polish camper

Put a little butter on the catch wire to lubricate it and now you have a hair trigger.

Only fix was to replace the strip I did a number of them in the 80s. At our Ford Lincoln Mercury dealer

My family out for a road trip

The condenser does not care 6 volt 12 volt. You can be off on the uf's and it would be ok 50% more or less think of it as a storage unit for current.

Please resend your pdf I deleted it by mistake. Thanks. 2mikefit@att.net

Please send me a pdf copy. 2mikefit@attnet. Thanks mike

Dan: Have you done a 4 cylinder Dodge Brothers water pump I had my rebuilt by a local machinist new ss shaft and 3 lip style seals. 2 yrs and it is leaking he has sense passed away. Could you be of help to me. Mike. F

One of 2 things #1 you do not drive it fast enough ( over 45 mph ) or #2 you are very lucky. Better go buy a lottery ticket. Mike

My reply is pie is round and not square also pie is good warn out of the oven.

I drove my Studebaker Avanti on Route 66 along with a 55 T Bird when he had to fuel up I did to my fuel gauge did not work but his did he put in 15gal. I put in 10 gal put it worked all the way .

We would play a game we called valve stems up you would drive around the school parking lot for a set amount of time and the car with the most valve stems up would win

No the one I need is like an old pill bottle it screws on just like you would screw a light bulb will try to post pictures not to good at doing to that will try. Thanks. Mike

Don Thanks for the reply. I need the glass bottle there looks like there is or was a bale to keep it from unscrewing and falling off ( that's when you run out of gas and sweep up the glass) I think if I tried to remove the metal part it would break then the next thing would be the vacuum pump would be in a number of pieces. Will await you pictures. Mike. Ps you guys may be right it is not a D B part aftermarket more than likely.

Sounds like the 40 Ford v8i had you had to kill it with the choke or it would not restart was a 6volt system and would sound like it was 12 volt. Poor engine was flat worn out no compression.

Hi I need the glass sediment bottle that is attached to the vacuum fuel pump on a 1918 D B it screws on the bottom of the pump. About 1 1/8 // 11/4 in diameter. Thanks Mike

I find myself in need of the small glass jar that is attached to the vacuum fuel pump on a @1918DB. Maybe used on other makes also. The top threaded part is about 1 1/8 to 1 1/4 just depends on how you measure it. Thanks. Mike

VL: You could post about how to boil water and very one would read about it. Looks like you may be winding up some loose ends I just wish I had your fortitude I just admire what you have been through.. God must be right there with you. Lots of love. Mike

20 + yrs for me run the hill in model Ts and As also Do time I did not get up th dge Brothers 16 times with a1918 Dodge first time I did not make it to the top😞

Now you made me cry remembering some of the same things but thanks for a reality check. Mike

I did a similar set up 11yrs ago and guess what still working. Lucky for what. I did provide good cooling for the diodes though

My money is on a cracked case the more you tighten the plug or wrap tape on it the more you force the crack open even a small amount.