Jump to content

Mikefit

Members
  • Posts

    471
  • Joined

  • Last visited

Everything posted by Mikefit

  1. If they are aluminum sell them for scrap with the aluminum cans about the only person that they mean anything to was your Dad Just my opinion. Mike
  2. Bet he was a snake oil salesman in his former life .
  3. I thought aluminum tape was for body repair
  4. You need to watch when dealing with a uninsured motorists they don't pay your insurance company pays under the uninsured motorists cause what now you have a claim your rates go upon all your autos and possibly your home. Insurance Companies don't have time to take the uninsured to court and still get nothing easier to just raise your rates.
  5. Could I ask what the problem is with the one you have
  6. Hope you found one that had an apron on and that was oil stained they are the best Machinist.
  7. I would take it to a good machinist and I am sure he could make a new extension with one end threatened that would thread into the retainer plate
  8. My Service Advisor and I would play bumper tag to and from work often
  9. We used the term street and alley for the 3/4 grind cams 1950s
  10. Named my car Flattery. (It got me nowhere )
  11. That load of logs today would be worth more than the truck today
  12. Each and everyone of the posts have make good . Points. Me I can afford it and I enjoy it so I just don't we
  13. Leo I'm sure they are off windmill as I have never saw them on a windmill
  14. Dad always used a 1/4" lock washer pressed into the pump arm was a tight fit and when the pump was installed it could not fall out. Was just the right thickness to work very well
  15. Had a gentleman stop by with his older motor home Dodge Chassis. He hard just changed to oil put in the 6 qt called for in that he owners book he looked under the engine totally dry no oil leak or drips. Found the dip stick tube rusted off at the pan and was just dangling in mid air.
  16. I had a 20s Buick it would push out coolant then run hot there was a baffle in the top tank to defuse the water interning the baffle came loose and was laying on top of most of the tubes not letting water flow. 're attached the baffle problem solved
  17. With the limited amounts of information I had a s very similar problem. Running to heavy oil engine with a very good lower end progress relief valve was stuck closed in the oil pump had real high oil pressur un till the oil filter material collapsed then very little oil pressure Just a . Though.
  18. A1 Foam and Material in California only does online orders and their fast on sending orders out They only ship the material rolled up they don't fold it up so you don't fight nasty creased material.
  19. To to the administrator. Peter what blanks do i need to fill in I failed to see spell check put the word set in place of step sorry
  20. Just a heads up the . Black over tan material that I see others comment that it is no longer available. Just ordered 12 yards from California 3days later it was on my door set and priced some what lower than my first attempt.
  21. V/8 check the fuel pump push rod they wear down and then it to short to give the pump a full stroke. Don't remember how long it needs to be but someone on here will come up with it
×
×
  • Create New...