gungeey

I stuff clothesline in the #3 piston half way up the compression stroke

Check your p.m. Box Bill

Master Craft

Update: Have one being shipped priority Can't seem to delete post

Need the machines surfaces shiny and smooth no polishing/rust removal Can reply here or gun-G@excite.com Thanks, Steve 9236

from a time standpoint it says "radial" on the side of that tire, don't think it was a picture taken in 63 but not a tire expert

If not mentioned before there is a rubber bushing in the linkage/shaft that plays a part in this too Right inside the union at the cottor pin in the picture Steve

turn signals/blower/radio all work off the accessory from your ignition switch check for harness plug melting/warpage the taillights are on their own line may be a two pronged problem, I would undo the access panel under the ignition switch and start from there

My biggest critique would be the sellers ebay feedback...there's a lot of strikes that look well deserved

Nobody takes better care of my money business than me

check belt tension

I'm no 1st gen expert but its called a "blade" upper front, a "plate" for lower front and a "plate" in the rear. Bumpers have "bumper bolts". Might have a couple screws loose but No Bolts...lol

Coat hanger with a piece of sponge twisted on the end...like a big Q-Tip

Andrew wear a mask when cleaning up that debris and try no to kick it up too much, that's a mouse nest I can smell the urine from here. It will make you sick.

Is the quartz movement powers by car battery or it's own battery ?

85% is a pretty steep figure, but pick ups lease great. SImply put, lease monthly payment is derived from MSRP- discounts/factory incentives- RESIDUAL. How much do 3 yr old pickups with 30-40k miles sell for at lease end? A LOT! They have a very strong residual. How are typical factory incentives on pick ups? Again, A LOT! Leasing keeps the factory running! Lease a pick up and you have a customer again in three years, keeping the turnstyle turning...Steve

Joe I might be interested in the detached 2nd floor apartment and the three garages underneath if the ultimate purchasers decided to rent cheap

Bob, was actually posing the question to the original poster, with all that said sounds like you would be a delightful customer. Your dentist is free to say "no" to your discount request, or maybe he's not the best dentist or maybe he cuts corners when it comes to instrument cleaning.. He may well be just a real nice guy... Other dentists might not need the work, have a tuition bill to pay for etc All these come into play in the world of retail and services rendered I wonder if your Hardware store owner/bbeach house owner thinks of people wanting discounts as "Ming"? LOL

I sell cars: My experience: A ) A "Great deal" is a matter of perception B ) The people that pay the least are least satisfied with their experience and purchase C) People aren't satisfied with TruCar "Exceptional Pricing", they want to be the new benchmark D ) If you don't want to dicker, well, sticker is quicker... Finally, do you go to the dentist or a restaurant and negotiate a price? Why not? Steve

If the belt is not tight nothing else matters Tha;t's where to start The battery should read 12.6-7 cold Running should read 13.7 minimum Steve

They are generic across the GM line. Ithink this is the reason for the separation: Old spark plug wires weren't well shielded and could cause misfire. The separation was for sequentially firing adjacent cylinder wires 18436572.... 5 and 7 keep them apart 12784563.... 3 and 1 " "

I wouldn't use it, I don't know that I would get rid of it either..interesting conversation piece and automobilia artifact, certainly isn't bothering anybody. Kind of like buying a house with a Virgin Mary out front... Steve Dennis can you take off the air cleaner cover and take a pictureso we can see what's under the hood?

I need to know how much influence the decibel level of the crowd has on the outcome of the game before I buy tickets.

"What a game, the Steelers came back and won 20-16 against Jacksonville!" "Really? How fast does the fullback run in the 40 yard dash?"

It's more akin to saying "Bartender, that's a great tasting martini, exactly what is the percentage of alcohol in it, and what is the cubic area of the olive in centimeters?" LOL