Riviera63 Posted September 6, 2018 Share Posted September 6, 2018 (edited) I have been trying for 6 weeks now to get weatherstrip for and/or installed around the doors on my car. A frustrating ordeal that started out as a simple afternoon project on a nice summer day. I am asking for a favor from one of you with a 63-65 Riviera. I need a picture of the original or correct replacement metal loop/tab that is attached 4 or 5 inches down from the top of the door please. See pic. Mine old ones are long gone and were a replacement set so I don't know if they were the same as the originals. I am in contact with one of the weatherstrip manufacturers that is not believing their product is not complete and not correct. Thanks. Bill Edited September 7, 2018 by Riviera63 revise text (see edit history) Link to comment Share on other sites More sharing options...
Riviera63 Posted September 6, 2018 Author Share Posted September 6, 2018 (edited) Could anyone at least describe what that attaching tab is supposed to look like for me please? Here is what was on the set I received today. There was no pin supplied to attach with and no directions given with the set as to how to attach. See pics. I reached out to the vendor that I purchased them from and they said I was supposed to use a sheet metal screw. to attach with. The set I removed had a wire loop/tab that was held in place by a black pin like the ones that hold the end above it in. I also reached out to the manufacturer and the manufacturer said that no one has asked about this tab, questioned it and how it should be attached EVER. They were perplexed and said they would get back to me. They got back to me and said that they were sending me some longer pins that should work to attach it with. The normal size pins are too short. Any help appreciated as to what was on an original set. Thanks. Bill Edited September 6, 2018 by Riviera63 revise text (see edit history) Link to comment Share on other sites More sharing options...
rodneybeauchamp Posted September 7, 2018 Share Posted September 7, 2018 Hi Bill, i did mine the other week and had the same issue. The original is held with a hard plastic push in pin that goes over a wire loop just like you found. I ended up cutting the thick fixing point that juts out to about 1.5 - 2.0mm thick then used one of the old pins. If you keep it at the thickness supplied it fouls the door. I first tried a Phillips head screw and only succeeded in scratching all the door surround. Boy did my installer get a talking too. ?????? Unfortunately it enlarged the hole so now I need a thicker pin on that side. Drivers side went really well after I learnt how to do it correctly on the passenger side. I’m a big believer in working on someone else’s car first before you do your own, that way if you stuff it up, doesn’t matter!????? if you you need pics let me know. Rodney0 1 Link to comment Share on other sites More sharing options...
Riviera63 Posted September 7, 2018 Author Share Posted September 7, 2018 (edited) 1 hour ago, rodneybeauchamp said: Hi Bill, i did mine the other week and had the same issue. The original is held with a hard plastic push in pin that goes over a wire loop just like you found. I ended up cutting the thick fixing point that juts out to about 1.5 - 2.0mm thick then used one of the old pins. If you keep it at the thickness supplied it fouls the door. I first tried a Phillips head screw and only succeeded in scratching all the door surround. Boy did my installer get a talking too. ?????? Unfortunately it enlarged the hole so now I need a thicker pin on that side. Drivers side went really well after I learnt how to do it correctly on the passenger side. I’m a big believer in working on someone else’s car first before you do your own, that way if you stuff it up, doesn’t matter!????? if you you need pics let me know. Rodney0 Hi Rodney, Thanks for replying. What you came up with for a fix came to me in the middle of the night. I did have the concern that being that thick it would bind in the door and that a screw might scratch. The vendor did mention that there was a metal tab in that thick attaching point, so cutting it down won't compromise its strength or holding power. I'm sorry that you had damage done to your car. At least I can finally get this simple project that was begun 6 weeks ago finished. I originally had ordered a set from CARS. I had the old weatherstrip out and the door cleaned and ready for the new pieces. I pulled them out and found that they had been manufactured incorrectly. The pins were in the reverse order of what they should have been. See pics. I contacted them and they said they would send a new set. They must have had a bad batch from their manufacturer as they did not have a good set to send me. I waited 5 weeks for them to get some in and finally cancelled the order and got my money back. I then ordered a set from Rubber the Right Way. Several days after I ordered I received a message that they were on back order. I called them and they said 2-3 weeks before they would be in. I cancelled that order and got my money back. I then ordered the current set from a vendor on e-bay. The current set I have is from Metro which coincidentally is the supplier for Rubber the Right Way. (for about $30 more than I paid from this other vendor) For people that order a Metro set this is what you will have to deal with. Send me a couple of pics if you get a chance. Thanks, Bill Edited September 7, 2018 by Riviera63 add pictures edit text (see edit history) Link to comment Share on other sites More sharing options...
PWB Posted September 7, 2018 Share Posted September 7, 2018 CARS blows it again. Sorry Mr Bill. Link to comment Share on other sites More sharing options...
Riviera63 Posted September 7, 2018 Author Share Posted September 7, 2018 I am contemplating sending the Metro weatherstrip back as their is no metal tab inside the thick rubber tab as the vendor said there was. I was checking to see other alternatives. I know that I can get them from Steele Rubber but, wanted to see if there were any others. Just for the heck of it I went to the OPGI (I know, I know) website to look at their weatherstrip and got a little surprise. They advertise that their weatherstrip is made by Metro Moulded Parts, Inc. The weatherstrip they have pictured has the metal tabs as I think they should have. See pic. I find it curious that there would be 2 different Metro versions out there. I would have been happy with that version. I reached out to Metro asking about this and will be curious to see their response. Bill Link to comment Share on other sites More sharing options...
Zimm63 Posted September 7, 2018 Share Posted September 7, 2018 I got mine from Steele and they fit fine. Don't recall any issues when I put them on a few years back. Link to comment Share on other sites More sharing options...
Riviera63 Posted September 7, 2018 Author Share Posted September 7, 2018 9 minutes ago, Zimm63 said: I got mine from Steele and they fit fine. Don't recall any issues when I put them on a few years back. Thanks for that. Did they have the metal tabs? I never have had any problems with any Steele Products I have ordered. They are priced so much higher than the others which scared me away at first but, it looks as if I should have just gone with them in the beginning and skipped all of the headaches. I called Clark's Corvair about their weatherstrip. The person I talked to had no clue as to who made theirs and whether they had the metal clips. Has anyone tried their weatherstrip? Bill Link to comment Share on other sites More sharing options...
Zimm63 Posted September 7, 2018 Share Posted September 7, 2018 58 minutes ago, Riviera63 said: Thanks for that. Did they have the metal tabs? I never have had any problems with any Steele Products I have ordered. They are priced so much higher than the others which scared me away at first but, it looks as if I should have just gone with them in the beginning and skipped all of the headaches. I called Clark's Corvair about their weatherstrip. The person I talked to had no clue as to who made theirs and whether they had the metal clips. Has anyone tried their weatherstrip? Bill Don't recall if they had metal tabs or not. Need to look this evening when I get home. Link to comment Share on other sites More sharing options...
Riviera63 Posted September 7, 2018 Author Share Posted September 7, 2018 3 hours ago, Zimm63 said: Don't recall if they had metal tabs or not. Need to look this evening when I get home. No need. They added some pictures since the last time I looked on their website. They show the metal tabs. Thanks. Bill Link to comment Share on other sites More sharing options...
jframe Posted September 9, 2018 Share Posted September 9, 2018 I bought my door, window run, and trunk rubber from CARS a couple years back, and had no issues. My door pieces had the correct metal tabs held on with a plastic pushpin. CARS may have changed suppliers. Link to comment Share on other sites More sharing options...
Riviera63 Posted September 9, 2018 Author Share Posted September 9, 2018 7 minutes ago, jframe said: I bought my door, window run, and trunk rubber from CARS a couple years back, and had no issues. My door pieces had the correct metal tabs held on with a plastic pushpin. CARS may have changed suppliers. I had CARS weatherstrip originally. They were fine but, manufactured backwards. They were unable to supply me with correct replacements. After several weeks of waiting I had to cancel and move on. I finally just bit the bullet and ordered a set from Steele Rubber. Hopefully, they will be here in a couple of days and I can get this project finished. Link to comment Share on other sites More sharing options...
Turbinator Posted October 13, 2018 Share Posted October 13, 2018 bill, got the whole set of rubber from with the fuzzies from Clark's Corvair and it worked out real good. I feel Steele will get you the right set on the first try. Regards, Red Riviera Bob 1 Link to comment Share on other sites More sharing options...
golfitup Posted January 25, 2019 Share Posted January 25, 2019 I use Rubber the Right Way. They can get Steele or Metro products at a big discount. www.RubberTheRightWay.com. Have not used for the 63-65 Riviera but have used for several other projects. They stand behind everything they sell so if it ain't right they will pay for the return. Link to comment Share on other sites More sharing options...
RockinRiviDad Posted January 25, 2019 Share Posted January 25, 2019 I purchased door weatherstripping from Rubbertherightway over a year ago. But I just installed them a month ago. NO metal tab/ring Link to comment Share on other sites More sharing options...
TheTaxMan Posted July 16, 2021 Share Posted July 16, 2021 Though I consider myself devastatingly good-looking with a snappy wit (though not sure my wife agrees) I only consider myself at best modestly mechanically inclined. How difficult is it replace all the weatherstripping by oneself (I do know that is technically not mechanical)? Was thinking it could be a good team building exercise for my wife and I during the fall or winter. Thoughts are appreciated. Thanks! Link to comment Share on other sites More sharing options...
RIVNIK Posted July 16, 2021 Share Posted July 16, 2021 don't let your worlds collide. especially in the garage 2 Link to comment Share on other sites More sharing options...
frenchy51 Posted July 16, 2021 Share Posted July 16, 2021 X2. Have found that to be very true especially after 44 years of marriage... 1 Link to comment Share on other sites More sharing options...
RivNut Posted July 17, 2021 Share Posted July 17, 2021 My wife enjoys helping with my projects. Sometimes I need that third hand. Most of the time it makes her feel needed and that’s worth the 3X time it takes to do the job. 😇 Link to comment Share on other sites More sharing options...
powerage Posted July 17, 2021 Share Posted July 17, 2021 Quite the nightmare in my experience. The rubber is no real problem, but the repro felts / fuzzies are terrible. If yours are even half decent I'd leave them alone Link to comment Share on other sites More sharing options...
60FlatTop Posted July 17, 2021 Share Posted July 17, 2021 If my wife is sitting at the kitchen table and I am shaking Wheaties into a bowl and adding blueberries I feel like that scared dog you can save for $19 per month. I am sure she would quickly point out an imminent error in weather strip installation as well. You could try enlisting help at home. In that vein, the thought came to me that when a woman retires she should be presented with a rolled up newspaper. 1 Link to comment Share on other sites More sharing options...
EmTee Posted July 17, 2021 Share Posted July 17, 2021 30 minutes ago, 60FlatTop said: In that vein, the thought came to me that when a woman retires she should be presented with a rolled up newspaper. Correction: "In that vein, the thought came to me that when a woman's husband retires she should be presented with a rolled up newspaper." Link to comment Share on other sites More sharing options...
TheTaxMan Posted July 17, 2021 Share Posted July 17, 2021 So I think we’ve confirmed that a team project might not be the best idea. I go back to the original question of whether I should be able to complete it on my own. Sounds like the felts can be a pain. Link to comment Share on other sites More sharing options...
RivNut Posted July 17, 2021 Share Posted July 17, 2021 1 hour ago, TheTaxMan said: So I think we’ve confirmed that a team project might not be the best idea. I go back to the original question of whether I should be able to complete it on my own. Sounds like the felts can be a pain. Yes, you should. Link to comment Share on other sites More sharing options...
RockinRiviDad Posted July 19, 2021 Share Posted July 19, 2021 (edited) If your not in a hurry…take your time & do it yourself. If your in a hurry, pay someone. If your wife is like Ed’s, go for the team effort concept. If she’s like mine, stop considering it 🤷🏻♂️ Edited July 19, 2021 by RockinRiviDad (see edit history) Link to comment Share on other sites More sharing options...
TheTaxMan Posted July 19, 2021 Share Posted July 19, 2021 Thanks for all the feedback. My wife feels I need to make it clear that she is very handy (and more handy than me in her mind)........ Link to comment Share on other sites More sharing options...
60FlatTop Posted July 19, 2021 Share Posted July 19, 2021 8 hours ago, TheTaxMan said: and more handy than me in her mind)........ There is an easy way to verify that. How many times does she start a sentence with "So"? Mine is catching herself now but has not become comfortable with "I challenge you", "In my opinion", or any of the options I have suggested. I remember my daughter visiting a few years ago and repeatedly responding with "Yeah, yeah, yeah". I asked her if there was someone at work that she had high regard for who answered "Yeah, yeah, yeah". She doesn't do that anymore. What those nuances and you can guide them into being a good working partner. Just don't tax her. Link to comment Share on other sites More sharing options...
RivNut Posted July 19, 2021 Share Posted July 19, 2021 Your wife and kids have it easy. Try being married to a teacher of English. Notice that I did not say an English teacher; she's from Nebraska, not England. An English teacher, one born in England, could teach any subject. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now