pont35cpe Posted August 18, 2018 Share Posted August 18, 2018 Can`t find any history of this Pontiac. Anyone have any input? 2 Link to comment Share on other sites More sharing options...
keiser31 Posted August 18, 2018 Share Posted August 18, 2018 COOL! 1 Link to comment Share on other sites More sharing options...
Taylormade Posted August 18, 2018 Share Posted August 18, 2018 Beyond saying that’s one of the best looking delivery trucks I’ve ever seen, I can’t help you. I wonder if any are still around? 1 Link to comment Share on other sites More sharing options...
Hudsy Wudsy Posted August 18, 2018 Share Posted August 18, 2018 Well...it reads "No. 2" on the door, so presumably one other might have been built. Link to comment Share on other sites More sharing options...
capngrog Posted August 18, 2018 Share Posted August 18, 2018 I noticed that the sign on the door read, "Pontiac Motor Division" in two lines with the third line being illegible. The fourth line read: "No.2". I tried enlarging the photo, but could still not make out the third line. The second word in the third line could be "Michigan", but that's just a guess. Anyway, with the car apparently being owned by the Pontiac Motor Division, could it have been a design/styling exercise based on the 1935 4 door sedan? I don't believe that Pontiac built pickup trucks in the 1930s (or later), so I think that the "Pontiac Delivery" of the Original Post was based on the Pontiac sedan and, therefore, could be termed a "sedan delivery". Additionally, the wheels of the "Pontiac Delivery" appear to be stock sedan wheels, circa 1935. Whatever it is, it's certainly a good looking vehicle. Below is a photo of the 1935 Pontiac 4 door sedan. The lineage seems to be apparent to me. Cheers, Grog Link to comment Share on other sites More sharing options...
pont35cpe Posted August 18, 2018 Author Share Posted August 18, 2018 5 hours ago, keiser31 said: COOL! John, I figure if anyone knew anything about this you would. I`ve had this picture for decades and seems like there was a statement that 2 were made, and they were used at an assembly plant to shuttle parts. Best bet on finding anything about this vehicle would probably be from an old plant employee. Tom Link to comment Share on other sites More sharing options...
pont35cpe Posted August 18, 2018 Author Share Posted August 18, 2018 (edited) 21 minutes ago, capngrog said: I noticed that the sign on the door read, "Pontiac Motor Division" in two lines with the third line being illegible. The fourth line read: "No.2". I tried enlarging the photo, but could still not make out the third line. The second word in the third line could be "Michigan", but that's just a guess. Anyway, with the car apparently being owned by the Pontiac Motor Division, could it have been a design/styling exercise based on the 1935 4 door sedan? I don't believe that Pontiac built pickup trucks in the 1930s (or later), so I think that the "Pontiac Delivery" of the Original Post was based on the Pontiac sedan and, therefore, could be termed a "sedan delivery". Additionally, the wheels of the "Pontiac Delivery" appear to be stock sedan wheels, circa 1935. Whatever it is, it's certainly a good looking vehicle. Below is a photo of the 1935 Pontiac 4 door sedan. The lineage seems to be apparent to me. Cheers, Grog Grog, Yes on the door: Pontiac Motor Division Detroit Michigan No. 2 It has the 6cyl(brave) hood ornament, 8cyl cars had the Indian Maiden Goddess, and has the 4dr front door. I`m really not sure what it`s called, I called it a delivery, because to me that`s what it looks like. I think the early General Motors Company(GMC)pick-ups had Pontiac engines, I agree, I don`t think Pontiac made any pick-ups. Edited August 18, 2018 by pont35cpe (see edit history) Link to comment Share on other sites More sharing options...
keiser31 Posted August 18, 2018 Share Posted August 18, 2018 I notice the rear fender on the delivery vehicle is a lot shorter than the four door rear fender. Link to comment Share on other sites More sharing options...
pont35cpe Posted August 18, 2018 Author Share Posted August 18, 2018 (edited) 1 hour ago, keiser31 said: I notice the rear fender on the delivery vehicle is a lot shorter than the four door rear fender. Good eye John, I know all the `35 Pontiacs used the same rear fender which tied to the rear panel under the tail pan which is not present on the delivery. I wonder if there are two doors on the back like a panel, or one door like a sedan delivery. I know panels usually have a pick-up cab and the delivery has a car front. Edited August 18, 2018 by pont35cpe (see edit history) Link to comment Share on other sites More sharing options...
1935pontiac605sedanman Posted June 21, 2020 Share Posted June 21, 2020 This was probably built for the factory as a parts Runner or for the plant managers. Olds did it in 1950. They made 7 sedan delivery "88s" for factory use. 1 Link to comment Share on other sites More sharing options...
nzcarnerd Posted June 21, 2020 Share Posted June 21, 2020 In those days every town of any size had at least one coachbuilder who would make whatever commercial body you wanted. This one could have been built by anybody. Link to comment Share on other sites More sharing options...
Pfeil Posted June 21, 2020 Share Posted June 21, 2020 14 hours ago, 1935pontiac605sedanman said: This was probably built for the factory as a parts Runner or for the plant managers. Olds did it in 1950. They made 7 sedan delivery "88s" for factory use. Exactly, After marketing finished with this car and one other, this car ran parts for Pontiac engineering division; 2 Link to comment Share on other sites More sharing options...
Robert G. Smits Posted June 21, 2020 Share Posted June 21, 2020 What a neat Pontiac!!! Link to comment Share on other sites More sharing options...
JamesR Posted June 21, 2020 Share Posted June 21, 2020 1 hour ago, Pfeil said: Just think what a popular and desirable classic that would be today if Pontiac had produced them for sale. No offense to the Chevy guys, but it's way cooler than the same era of El Camino. And, as others have said, that panel delivery is beautiful, too. Link to comment Share on other sites More sharing options...
Pfeil Posted June 21, 2020 Share Posted June 21, 2020 With the information I have, Pontiac's first sedan delivery is 1938 and it's Canadian. Link to comment Share on other sites More sharing options...
padgett Posted June 22, 2020 Share Posted June 22, 2020 I recall something about Pontiac building a few (more than one but less than a gaggle) for use around the plant. Back then people in the right positions at GM could build anything they wanted. Mine had to be built in Framingham because that was the only plant building both GTOs and station wagons. Had to pull a few strings to get the body colored bumper on my 70 GS. Helped to be a GMI student gearhead. 1 Link to comment Share on other sites More sharing options...
Jim Skelly Posted June 24, 2020 Share Posted June 24, 2020 On 6/22/2020 at 5:52 PM, padgett said: Back then people in the right positions at GM could build anything they wanted. Mine had to be built in Framingham because that was the only plant building both GTOs and station wagons. Had to pull a few strings to get the body colored bumper on my 70 GS. Helped to be a GMI student gearhead. So tell us the story, and are there any photos of it? Link to comment Share on other sites More sharing options...
Terry Wiegand Posted June 24, 2020 Share Posted June 24, 2020 I think that I either read or heard that all of the tooling for the 6-Cylinder Buick engine went to GMC Truck when Buick brought out the Straight 8 in 1931. Hopefully someone on here will elaborate on that. I have been a huge fan of General Motors Products for going on 60 years, however, I cannot recall ever hearing anything about Pontiac engines being used in anything other than their cars. Like I said, I hope that someone who knows about things like this will educate us all. Terry Wiegand South Hutchinson, Kansas Link to comment Share on other sites More sharing options...
pont35cpe Posted June 24, 2020 Author Share Posted June 24, 2020 28 minutes ago, Terry Wiegand said: I think that I either read or heard that all of the tooling for the 6-Cylinder Buick engine went to GMC Truck when Buick brought out the Straight 8 in 1931. Hopefully someone on here will elaborate on that. I have been a huge fan of General Motors Products for going on 60 years, however, I cannot recall ever hearing anything about Pontiac engines being used in anything other than their cars. Like I said, I hope that someone who knows about things like this will educate us all. Terry Wiegand South Hutchinson, Kansas I`m thinking `55-`59 GMCs were equipped with Pontiac V8s. Link to comment Share on other sites More sharing options...
Bloo Posted June 24, 2020 Share Posted June 24, 2020 (edited) Buick's tooling did go to GMC. Allegedly there are GMCs out there with almost-Buick engines. It does bring up more questions than it answers. There was a thread here as well as on the HAMB about an unidentified Pontiac-like car that turned out to be a 1932 or 1933 General Motors Cab made by GMC. The interesting part is that the document that finally identified the car, a brochure, listed at least 6 GMC engines (cab, bus, truck) in wildly differing sizes, so couldn't have been all Buicks. IIRC they were all OHV designs. In reality, GMC used a lot of Oldsmobile flathead sixes, and occasionally Pontiac flathead sixes. If GMC had the Buick OHV tooling, as well as a complete line of OHV engines covering every possible displacement range in 1933-34, why were they using a bunch of Oldsmobile flathead sixes by 1935-38? The also used the Pontiac (single head) flathead 6 in 1938 1/2 ton GMC trucks, and allegedly used the Chevrolet OHV 6 in some application or another. I believe I have heard of them using the Pontiac split head six at some point too. Maybe @Tinindian would know about that? The split head six was used in Pontiacs in the late 20s and early 30s, so falls right in the era when GMC claimed to have a whole line of OHV engines and wouldn't have needed it. The GMC OHV straight six we all know came out in 1939 IIRC, and is downright modern compared to the Chevrolet Stovebolt sixes it resembles at first glance. It seems extremely unlikely to me that this one could be based on the old Buick six. Does anyone know? Maybe they just recycled some tooling for the new design? There was also a large cube big truck OHV six a little later. It didn't appear until sometime in the 40s. Neither existed in 1932-33. Back to the General Motors Cab. Later there was another thread in these forums about a second 1932 or 1933 cab, this one complete and restored. The owner knew about the other one. Apparently it had been a parts car for the restoration. IIRC this cab had an OHV engine. It was probably the old Buick six. Confused yet? I am. Edited June 24, 2020 by Bloo (see edit history) Link to comment Share on other sites More sharing options...
padgett Posted June 24, 2020 Share Posted June 24, 2020 Jim: Have mentioned before but both were "different". Buick looks tame now but in '70 wasn't. Never really cared for chrome. Don't think I've ever had a "stock" car for long. Both had to be special ordered partly because green with a saddle interior was not stock. '75 Buick was used to win the FEA National Economy Run. Thinking about an autobiography but would need to be fiction. . Link to comment Share on other sites More sharing options...
Pfeil Posted June 24, 2020 Share Posted June 24, 2020 (edited) On 6/23/2020 at 7:15 PM, pont35cpe said: I`m thinking `55-`59 GMCs were equipped with Pontiac V8s. You are correct. 1955 = 287 cu. in. just like the 55 Pontiac 1956= 316.6 cu.in. just like the 56 Pontiac 1957= 347 cu. in. just like the 57 Pontiac 1958= 336 cu. in. different than the 58 Pontiac @ 370 cu. in. 1959= 336 cu.in. different than the 336 above in bore and stroke and different than the Pontiac at 389 cu.in., but again still the same basic block and heads. ALL engines above are the same basic block, just different bore and stroke and later engines use larger valves. All engines above are reverse cooled where the cooled coolant first goes to the cylinder head ( instead of the block) and through distribution tubes in the heads send a jet of cooled coolant right to the exhaust valve on the other side of the water jacket. below, a 1955 Pontiac V-8 and notice the right cylinder head with a arrow pointing the elbow where cooled coolant goes to the head ; below is a1959 389 tri-power engine and is basically the same engine above; A 59, 389 4bbl Pontiac below is a 1957 GMC with a 347 cu. in. Pontiac engine; Edited June 25, 2020 by Pfeil (see edit history) 1 Link to comment Share on other sites More sharing options...
Guest Posted June 24, 2020 Share Posted June 24, 2020 '20's, '30's engines in GMC trucks. 1928-1950 Oldsmobile F-Series(also modified for GMC trucks) 1936–1962 Chevrolet Blue Flame inline-6 (also used in some GMC trucks) 1939–1962 GMC inline-6 Buick 6 engine in T20 and T40 Pontiac engine in Light Delivery known a Pontiac in '27 and GMC in '28 T10 110” wheelbase, T20 132” wheelbase GMC K102 4 cyl 4.5 x 6.5 '26-'29 Pontiac split-head engine in some GMC trucks up to 2 ton 1926-1933 Oldsmobile 6 cyl engine in some GMC trucks up to 1½ ton 1927-1933 GMC/Yellow Bus engine 6 cyl 3.5 x 4.5 GMC/Yellow Bus engine 6 cyl sleeve valve 4.25 x 5.5 GMC/Yellow Bus engine V8 engine '27-'29 Final 4 cyl GMC engine in 1929. 1930 T-60 B and T-82 A 94hp 6 cyl 1930 T 31 and T-45 76 hp 6 cyl 257.5 ci 1931 T-19A 60 hp 200.5ci Pontiac engine 1931 T-61, T-83 and T-90 NEW 112 hp, 400.9ci 6cyl 1933 T-18 and T-33NEW 69 hp, 221.4 ci,OHV replaces Pontiac split head. 1935 T-16 and T-18 1-1.5 ton 213 ci Lhead 6 cyl T-23 2.5-3 ton 221 ci ohv T-33 3-4.5 ton 257 ci ohv T-43 3.5-5 ton 257 ci ohv T-46, T51 4-6.5 ton 331 ci ohv T-61 5-6.5 ton 400 ci ohv T-83 6-8 ton 400 ci ohv T-84 7 to 10 ton 450 ci ohv 1936 T-14 ½ ton 213 ci T-18 new engine 239 ci Also new engine 286 ci It is my belief that all the OHV engines after 1934 up until the early 50's at least were either based on Chevrolet, Pontiac or on the Buick 6. I believe I have read this but cannot find the reference right now. Link to comment Share on other sites More sharing options...
Pfeil Posted June 24, 2020 Share Posted June 24, 2020 Now comes the Oldsmobile V-8 in GMC trucks. Starting in 1955, for the larger trucks, the Oldsmobile Rocket V-8 was available. In 1955 and 1956, it was 324 cubic inches (5.3 L). Power listed for 1956 was 210 HP @ 4200 rpm; torque was 305 lbs ft @ 2400 rpm. For the 1957 through 1959 model years, it was upped in bore and stroke and called the 370. Power listed as 232 HP @ 4200 rpm and torque as 355 lbs ft @ 2600 rpm. Link to comment Share on other sites More sharing options...
knee-action Posted June 25, 2020 Share Posted June 25, 2020 This takes us a little off-topic, but I thought you guys might enjoy the picture. This is a 1934 Canadian GMC model T-14 sedan delivery. Chevrolet body with Oldsmobile front-end sheet metal. Enjoy. 3 Link to comment Share on other sites More sharing options...
Pfeil Posted June 26, 2020 Share Posted June 26, 2020 (edited) On 6/21/2020 at 11:34 AM, JamesR said: Just think what a popular and desirable classic that would be today if Pontiac had produced them for sale. No offense to the Chevy guys, but it's way cooler than the same era of El Camino. It's the same old reason why Pontiac couldn't release the Pontiac V-8 in 1953 like it was supposed to or make their own sports car or continue racing after the G.M. ban on racing after 1963. The reason was the 14th floor inhabitants of the G.M. building. Ever wonder where the looks for the C-2 Corvette came from? Take a look at this 1964 Pontiac below; Every Pontiac lover knows the story and the answer to the story, " If they would just have left Pontiac alone ". Edited June 26, 2020 by Pfeil (see edit history) 1 Link to comment Share on other sites More sharing options...
padgett Posted June 26, 2020 Share Posted June 26, 2020 Also see Opel GT and Toronado there. Link to comment Share on other sites More sharing options...
Pfeil Posted June 26, 2020 Share Posted June 26, 2020 2 hours ago, padgett said: Also see Opel GT and Toronado there. I can see Opel GT but not Toronado. Link to comment Share on other sites More sharing options...
padgett Posted June 27, 2020 Share Posted June 27, 2020 No ? Link to comment Share on other sites More sharing options...
Billy Kingsley Posted June 27, 2020 Share Posted June 27, 2020 Looks like an Opal with Firebird taillights. Link to comment Share on other sites More sharing options...
Pfeil Posted June 27, 2020 Share Posted June 27, 2020 2 hours ago, Billy Kingsley said: Looks like an Opal with Firebird taillights. You mean the back end of the Opel looks like the Firebird with it's own Opel taillights. You know Billy that Adam would be disappointed in you. Link to comment Share on other sites More sharing options...
Pfeil Posted June 27, 2020 Share Posted June 27, 2020 (edited) 4 hours ago, padgett said: No ? Well, possibly. David North did a superb job on that body...… It's ageless! Then they ruined it; Edited June 27, 2020 by Pfeil (see edit history) Link to comment Share on other sites More sharing options...
Billy Kingsley Posted June 27, 2020 Share Posted June 27, 2020 I don't know who Adam is, and truth be told most of my knowledge of the Opal comes from looking at the box of the AMT kit😀 Link to comment Share on other sites More sharing options...
padgett Posted June 27, 2020 Share Posted June 27, 2020 Adam Opel. Big guy in Germany. GM owned Opel GmbH from 1931 to 2017. And so it goes Billy. 1 Link to comment Share on other sites More sharing options...
Pfeil Posted June 27, 2020 Share Posted June 27, 2020 8 hours ago, Billy Kingsley said: I don't know who Adam is, and truth be told most of my knowledge of the Opal comes from looking at the box of the AMT kit😀 Now Billy, after all this back and forth Adam would really be disappointed. 1 Link to comment Share on other sites More sharing options...
Pfeil Posted June 28, 2020 Share Posted June 28, 2020 You may laugh Billy, but old Adam probably wouldn't like being called one of the gemstones. Get it? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now