Antiquelover703 Posted May 22, 2018 Share Posted May 22, 2018 Hello, I am looking for a 1966 Austin Healey Sprite 2DR. The seller is asking $8000 for it. Per the description, there is no any mechanical issue. Most of parts have been updated. I will like to know about everyone's thoughts. Is the price reasonable? Any help is much appreciated. Link to comment Share on other sites More sharing options...
J.H.Boland Posted May 22, 2018 Share Posted May 22, 2018 Check the body undercarriage very carefully. Some years ago,one split right in half on a curve near here and killed two oncoming motorcyclists. Jim Link to comment Share on other sites More sharing options...
Bush Mechanic Posted May 22, 2018 Share Posted May 22, 2018 Common rust points are the floors, sills, (rockers?), and the bottom of the A pillars. I am from Australia, so not really up to speed with the US values. That said, converting the price to A$, I would regard this one as overpriced, on what I can see. The paint appears to be a rough re-spray, which has been scratched and banged around somewhat. Hood, (roof), appears to have come adrift due to missing press-studs. That level of care in the maintainance of the vehicle would ring alarm bells for me, despite claims made by the seller. I would advise that, if at all possible, have someone with mechanical knowledge look at it for you. Perhaps try contacting a 'British' car club in your area. These little cars are great fun to drive, and easy to work on. I have owned a number of them over the last 50-odd years, and still drive a '72 model. There are plenty for sale in the US. A good place to start looking being the Sprite/Midget section of mgexp.com You will get lots of answers to any question that you may have regarding these cars on their forums. A very knowledgeable and helpful crowd of MG/Sprite owners. Good luck with your search. You car is out there somewhere! 1 Link to comment Share on other sites More sharing options...
1912Staver Posted May 22, 2018 Share Posted May 22, 2018 (edited) This year is about the least desirable Sprite/ Midget. At that price I would expect the car to be very very good. This one appears to be so-so. Gearboxes are weak, they are Morris Minor derived and don't stand up well if you drive it as a sports car. Rear axle shafts, differential internals are weak, later cars had much better axle shafts. Front susp. is quite prone to wear at the king pin to lower control arm connection. Just a small acme thread pin that rides steel on steel in the control arm. They are great little cars however they were built to a very low price point, it's a wonder any are still left. A better bet is newer for increased robustness , avoid the last generation with Triumph Spitfire engine , gearbox ,etc. Or older for collectability. {Sliding side screen , Bug Eye or MK 2} I have owned several over the decades. Greg in Canada Edited May 22, 2018 by 1912Staver (see edit history) 1 Link to comment Share on other sites More sharing options...
Pluto Posted May 23, 2018 Share Posted May 23, 2018 My hip-shot opinion, with no reference to price guides or scrutinizing this car is that it’s worth about a quarter of the asking price. Rust, casual engineering/build quality and ho-hum performance put Spridgets at the low end of the market. This car looks like it’s carrying a lot of oxide under the green paint. If you must have one, find the very best out there and pay the seller for his sweat and busted knuckles. Link to comment Share on other sites More sharing options...
RansomEli Posted May 23, 2018 Share Posted May 23, 2018 I agree with everybody - it's a bit overpriced. My guess is about $2K over. The front bumper looks askew, which is a warning sign. Fixing the paint chips will cost more to repair than you think, too. Check completed A-H Sprite auctions on eBay. That will give you a good estimate on what the cars are selling for. Link to comment Share on other sites More sharing options...
mike6024 Posted May 23, 2018 Share Posted May 23, 2018 Here's one for $4K, leaking oil and probably needing an engine rebuild. Body good, owner claiming no rust. Oh, and a 1968. Austin Healey Sprite Link Link to comment Share on other sites More sharing options...
Spinneyhill Posted May 23, 2018 Share Posted May 23, 2018 The skew bumper looks to have contacted the paintwork. There is damage at each end. What else is damaged underneath? Link to comment Share on other sites More sharing options...
plymouthcranbrook Posted May 23, 2018 Share Posted May 23, 2018 On Fleabay now: https://www.ebay.com/itm/1979-MG-Midget-Convertable/153031224969?hash=item23a15f2e89:g:1aIAAOSwrBRa8GlN&vxp=mtr Link to comment Share on other sites More sharing options...
mike6024 Posted May 23, 2018 Share Posted May 23, 2018 That is ugly as sin with those rubber bumpers. Link to comment Share on other sites More sharing options...
1912Staver Posted May 23, 2018 Share Posted May 23, 2018 An even bigger problem than appearance with the rubber bumper cars is the smogger Triumph 1500. The slightly earlier A series 1275's are much more desirable. Greg in Canada Link to comment Share on other sites More sharing options...
Antiquelover703 Posted May 23, 2018 Author Share Posted May 23, 2018 Thank you so much for all of your opinions. That helps me a lot. I decide taking a cruise trip with my family instead of buying this car. I will dig in for another good one. Many thanks for all! Link to comment Share on other sites More sharing options...
60FlatTop Posted May 23, 2018 Share Posted May 23, 2018 My measure is how concerned I am about someone buying the car I found while I run home to get the cash. If you can sit down at a computer and ask for advice, then ponder the answers, there is a better car out there for you. I only have one old car that I bought with my head. And I'm planning to sell it in a couple of weeks. As far as the price, I really smiled at the comment "worth a quarter of the asking price". I sold this for $2200 a while back with a few parts of the engine. I know it is a Buyeye, but it is the same under the skin.. Link to comment Share on other sites More sharing options...
Pluto Posted May 23, 2018 Share Posted May 23, 2018 It’s the skin that makes the Bugeye. A later spridget in that condition is a $500 car. Link to comment Share on other sites More sharing options...
1912Staver Posted May 23, 2018 Share Posted May 23, 2018 (edited) $2200.00 sounds about right . Did it have a title ? if so not a bad deal at all. The hood alone is $1000.00 any day of the week. Bug Eyes are always in strong demand. The engines even if complete have little value, 1275 is the only way to go. Greg in Canada Edited May 23, 2018 by 1912Staver (see edit history) Link to comment Share on other sites More sharing options...
TerryB Posted May 23, 2018 Share Posted May 23, 2018 6 hours ago, Antiquelover703 said: Thank you so much for all of your opinions. That helps me a lot. I decide taking a cruise trip with my family instead of buying this car. I will dig in for another good one. Many thanks for all! NOooo! Not a cruise! They will feed you too much, give you way too many drinks, and you’ll hang out with a bunch of old people telling you what medicines the take, when their next doctor appointment is, how their children don’t listen to them any more and a whole bunch of other uninteresting stuff. Buy a car! When you get back from that cruise you will need a full size car, not a little sports model. Don’t say I didn’t warn you! There’s still time to find a car! ? Terry Link to comment Share on other sites More sharing options...
60FlatTop Posted May 23, 2018 Share Posted May 23, 2018 1 hour ago, 1912Staver said: $2200.00 sounds about right . Did it have a title ? if so not a bad deal at all. My friend had owned the car, disassembled, since 1968. He bought it from a 13 year old neighbor with a signed New York State registration, but never transferred it into his own name. The kid who signed the reggie is grown up and has a business 30 miles away. He signed the proper paperwork and I licensed and insured it, as seen, to legally put it in my name. That's what you call a diligent value add as opposed to a flip. I also marshaled all the parts into one area and sorted them. A couple weeks ago I found a stray push rod and called the new owner. He said not to worry. He was widening the car 4" and stirring in a V8. The car was completely rust free. I had thought about placing the body on a full frame and building one of those 1980's style nouveau classic roadsters, Cenet style or the like. No one seemed to care for the original species. Bernie Link to comment Share on other sites More sharing options...
1912Staver Posted May 23, 2018 Share Posted May 23, 2018 (edited) In my neck of the woods Bug Eyes are popular to say the least. Most are not restored to dead stock condition but rather sensible mods for performance and drivability. 1275, disk brakes off a later Midget. A 5 speed conversion for the well healed. Toyota rear axle assy. All the stuff that was low performance/ under engineered on the stock examples. Very pleasing cars when set up correctly. Heaven forbid widened to take a v8. There are plenty of MGB's around that are far more adaptable if you must have a V8. Or even Sunbeam Alpines/ TVR 2500's . But please spare the little Bug Eyes from such ill considered plans. Around here your car would have sold in a blink and probably for more money to some one who would not of immediately turned it in to scrap metal. Greg in Canada Edited May 23, 2018 by 1912Staver (see edit history) Link to comment Share on other sites More sharing options...
Restorer32 Posted May 24, 2018 Share Posted May 24, 2018 Bug Eyes just don't hold up very well in a head on collision with a full sized Chevy. Ask me how I know. Link to comment Share on other sites More sharing options...
60FlatTop Posted May 24, 2018 Share Posted May 24, 2018 The car sat under a tarp from 1968 to 2017 (three tarps weathered away, as I heard). The parts were in crumbling boxes, most with the bottom out. And now a guy is putting a V8 into, the guy just doesn't know how to treat a special car. It sold in about 10 hours. One guy brought his Wife. She wouldn't let him buy it. He called back the next day with permission. It was sold, no telling what he had to do to get permission. One said he had to wait for his Wife to get out of work. I told him not to come if he was going to bring her and recommended a good restaurant to take her to. Another was on his way with a flatbed but I had to turn him around when I got the cash. As far as turning it into scrap metal, he was about 65 years old and turned it into a dream. Lots of men that age have quit dreaming. He might live a little longer. The guy who did whatever to get permission and found out it was sold; he might not fare so well. Link to comment Share on other sites More sharing options...
Uncle_Buck Posted May 24, 2018 Share Posted May 24, 2018 When buying vintage British cars, always ask for the free T-shirt ... 2 Link to comment Share on other sites More sharing options...
plymouthcranbrook Posted May 24, 2018 Share Posted May 24, 2018 On 5/22/2018 at 9:31 PM, mike6024 said: That is ugly as sin with those rubber bumpers. Yes, yes it is Link to comment Share on other sites More sharing options...
capngrog Posted May 25, 2018 Share Posted May 25, 2018 On 5/24/2018 at 8:16 AM, 60FlatTop said: The car sat under a tarp from 1968 to 2017 (three tarps weathered away, as I heard). The parts were in crumbling boxes, most with the bottom out. And now a guy is putting a V8 into, the guy just doesn't know how to treat a special car. Now I'm confused. Which guy didn't know how to treat "a special car", the one who stored it under a tarp for 49 years, or the one who put the V8 into it ... or both? Cheers, Grog Link to comment Share on other sites More sharing options...
60FlatTop Posted May 25, 2018 Share Posted May 25, 2018 BINGO! Link to comment Share on other sites More sharing options...
1912Staver Posted May 25, 2018 Share Posted May 25, 2018 It's not the V8 part that is a truly bad idea, it's the widening. A huge amount of work and a very good chance of never being finished. The V8 thing is old hat. If you need crazy power there are lots of 4 cyl. routes these days. Link to comment Share on other sites More sharing options...
1912Staver Posted May 25, 2018 Share Posted May 25, 2018 And even if you just have to have a V8 you can fit one into a stock width Sprite quite easily. Greg in Canada Link to comment Share on other sites More sharing options...
CarlLaFong Posted May 25, 2018 Share Posted May 25, 2018 11 minutes ago, 1912Staver said: And even if you just have to have a V8 you can fit one into a stock width Sprite quite easily. Greg in Canada Yeah, that swap was easy. Just stick the engine in and drive away Link to comment Share on other sites More sharing options...
1912Staver Posted May 25, 2018 Share Posted May 25, 2018 Compared to widening the entire body, yes it would be easy. Greg Link to comment Share on other sites More sharing options...
capngrog Posted May 25, 2018 Share Posted May 25, 2018 1 hour ago, CarlLaFong said: Yeah, that swap was easy. Just stick the engine in and drive away Hey, that's the way they do it on T.V. I'll bet they could widen a Spridget body in 20 minutes on T.V. Easy breezy! Cheers, Grog 1 Link to comment Share on other sites More sharing options...
SC38dls Posted May 25, 2018 Share Posted May 25, 2018 (edited) When I was first out of the army (Dec 68) I bought a 61 Austin Healy 3000 that the engine was in bad shape for $300. I didn't have the money for a rebuild or junk yard AH engine but $25.00 got a Ford 289 block. A friend's dad was a VP of NAPA auto parts and gave me ( he was a WW2vet and just wanted to say thanks for my service) the complete internals, intake, exhaust, carbs and everything else I needed for it. I just had to put the NAPA decals on it if I raced it at th drag strip. It was a better cam than normal, solid lifters, 10.5 to 1 high rise forged pistons. We deburred all the intake channels and the headers were oversized along with the rest of the exhaust. The distributor and spark plug wires were the Ecklin gold along with the points. With all of the upgrades to the engine I was told it had to be close to 400hp. It was a very easy engine swap. The 289 fit very well between the rails of the frame. The rear end held up very well but the wire wheels were a problem- they kept breaking. if I wasn't careful in first gear. The other problem was the frame eventually was torn up from the power we had no matter how much we reinforced it . I am not positive but I believe the frame on a sprite and a 3000 are the same width (34.5 inches) and if that is correct a V8 small block can fit very easily. My engine is still running around River Forest IL in a 49Ford pickup the 3000 is on 4 or5 other 3000s and the frame has been scralled. I don't think a sprite will handle even a stock V8 power for long. Dave S Edited May 25, 2018 by SC38DLS (see edit history) Link to comment Share on other sites More sharing options...
60FlatTop Posted May 25, 2018 Share Posted May 25, 2018 2 hours ago, capngrog said: I'll bet they could widen a Spridget body in 20 minutes on T.V. Easy breezy! Moving in slow motion with light streaming through a fog of liquid nitrogen, and the droning of Hard Rock Cafe memories in the background. Link to comment Share on other sites More sharing options...
Restorer32 Posted May 25, 2018 Share Posted May 25, 2018 I vote for an MGB. Wife #1 and I wore out a pair of B's as our daily drivers back in the day. A '67 and a '72 as I remember. My brother bought a rubber bumper B new and it basically fell apart. Link to comment Share on other sites More sharing options...
padgett Posted May 25, 2018 Share Posted May 25, 2018 Problem is that a Brit car's idea of oil control is a sponge under the engine. For that kind of money could buy either a nice pre-facelift Merc SLK230 or a Fiat 124 Spyder (just clean the oil slinger), both with DOHC and five speeds. Actually could even get a 6 cyl Chrysler Crossfire roadster with a 6-speed manual. Link to comment Share on other sites More sharing options...
mike6024 Posted May 25, 2018 Share Posted May 25, 2018 Much of the appeal is the vintage styling. The steering wheel. The shifter on the tunnel without a center console. Someone who might say this will not perform as well as modern Mercedes SL with a v-8 and automatic transmission is totally missing the point. At $8k this one is cheaper than a comparable condition Healey 3000. Look at the sports car used in the filming of "The Birds." Who wouldn't want a car like that to cruise the coast in? Link to comment Share on other sites More sharing options...
padgett Posted May 26, 2018 Share Posted May 26, 2018 I like Astons, even early ones. Also like Jags. Took the cure and no longer need an oil pressure gauge. Is a Mini Cooper in the garage at the moment. Have always liked Mercs (world's best taxicab) even if diesels are the filthiest engine to work on I've seen. Do think the early SLKs (not SL poofmobiles) and Crossfires are undervalued at the moment particularly with manual transmissions. Had a girlfriend with a Healy 3000, always thought of it as a ladies car. Trivia: Identify "Boston Beany Sprout". BTW if going for a 1275, get the dual carb. Single carb are dogs. ps if no Laycock OD switch fahgedaboudit. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now