Jump to content

Manuel

Members
  • Content Count

    865
  • Joined

  • Last visited

Everything posted by Manuel

  1. Do the old inner seals have any part numbers on them?
  2. They could be Dodge-Plymouth. Do they have 36 spokes? Is the centre hole 2 3/4"? What is the PCD? Manuel in Oz
  3. There were a couple of good threads on vehicle lighting on Ford Barn Forum a couple of years ago. Also conversion formulas for CP, Lux and Lumens etc. See here: https://www.fordbarn.com/forum/showthread.php?t=116621 https://www.fordbarn.com/forum/showthread.php?t=242395 Cheers, Manuel in Oz
  4. The cars on the right COULD be 2 Fords. Any chance of making the pics bigger? Manuel in Oz
  5. Australian body builders would more or less build what ever body the customer wanted. Whether it was on the passenger or commercial chassis. Manuel in Oz
  6. No 3 is a model T Ford & next one looks like a Lincoln.
  7. Apparently decking the manifold side of the block is a good idea too -- so I have been told. Manuel in Oz
  8. Would you have the model / type or part no of the new core? It would be handy to know. Manuel in Oz
  9. Did you get the radiator repaired or did you have to buy a new core?
  10. So is 1872 the correct no for 33's? Manuel in Oz
  11. Is that the red Roadster? Manuel in Aus
  12. Nice Tourer Rocky. Is it a TJR "King of the Road" body? Cheers, Manuel in Oz
  13. Such a clear sharp old photo. Manuel in Oz
  14. The truck on the right is a 1932-34 Ford.
  15. My book says brake drums up to 1937 may interchange on some Dodges. Manuel in Oz
  16. Those windowed brake drums started in the very last Model A’s up to about 1935. Manuel in Oz
  17. Those headlights look strange. Too high up and seem to have shallow bodies in those pics. They seem to be sitting on rods or something. Apart from that, it’s a nice looking car. Manuel in Oz
  18. I saw on Facebook someone making new knobs. Manuel in Oz
  19. Hi Scott, Can u send that pic again. All I can see is gobbledigook. What would you be asking for it-them? Manuel in Oz
  20. Hi Would 1933 Dodge horn brackets be the same as 33 Plymouths? Manuel
  21. 3rd pic-- the last car looks like a Chev 4. Manuel in Oz
  22. Hello, Happy to help. I can't help with the air compressor and the hand winch tipper tray. I can possibly decipher the serial / engine numbers if you find them. Ebay is the best source for original manuals. Where are you located in Aus? Manuel in Oz Hi, These truck models were made from 1933 to 35 in different sizes. The engine no is on the block just under the head. The chassis no is probably on the chassis rail under the front guard. TJ Richards made bodies/cabs for them. Hope this helps.
  23. Hi, These truck models were made from 1933 to 35 in different sizes. The engine no is on the block just under the head. The chassis no is probably on the chassis rail under the front guard. TJ Richards made bodies/cabs for them. Hope this helps. Manuel in Oz
  24. The 32 was a road patrol vehicle. I have seen pics of it before. Manuel in Oz
×
×
  • Create New...