hook Posted February 15 Share Posted February 15 I don't mind using any of my tools. There are some jobs that I like less than others, but the most important thing is having the proper tool for the job I'm doing. With out the proper tool everything goes to hell real fast. I also don't agree with a fire extinguisher being a tool. A tool is something you plan to use for a specific project. The need for a fire extinguisher is the result of using the wrong tool in the wrong place at the wrong time and the need to get bailed out! Link to comment Share on other sites More sharing options...
jp1gt Posted February 15 Share Posted February 15 Post Driver 2 1 Link to comment Share on other sites More sharing options...
hook Posted February 15 Share Posted February 15 1 hour ago, jp1gt said: Post Driver Got one and it sure beats the heck out of a sledge hammer for the same purpose. 1 1 1 Link to comment Share on other sites More sharing options...
rocketraider Posted February 15 Share Posted February 15 Corollary tool to a post driver. I hate these things too. But here's one of the worst of all- the Mattock! Or as I call it "idiot stick". Mattocks are banned from HydraMatic Drive... 1 Link to comment Share on other sites More sharing options...
Larry Schramm Posted February 17 Share Posted February 17 (edited) On 2/15/2024 at 1:09 PM, hook said: Got one and it sure beats the heck out of a sledge hammer for the same purpose. Me too, I have one of those post drivers, but it it red. I have gotten good at installing metal posts with the front end loader of my tractor. Much easier. Edited February 17 by Larry Schramm (see edit history) Link to comment Share on other sites More sharing options...
arcticbuicks Posted February 17 Share Posted February 17 i once helped do a sand point well....with the same post driver.......very slow going Link to comment Share on other sites More sharing options...
JamesR Posted February 17 Share Posted February 17 On 2/11/2024 at 6:30 AM, 30DodgePanel said: Great post! Here's the tool I don't use nearly as much as I should: 3 1 Link to comment Share on other sites More sharing options...
demco32 Posted February 17 Share Posted February 17 On 2/10/2024 at 11:02 PM, Lee H said: Any metric tool. It’ll be a job I have to do, not want to do. And there still won’t be enough room to work, even after I remove half the motor to get at it. If the insh size tools are not difficult enough, try working on this 2 Link to comment Share on other sites More sharing options...
Billy Kingsley Posted February 17 Share Posted February 17 Although it rarely has uses in automotive, I absolutely hated the table saw. I know how to use it, I know the proper safety procedures, and I did use it successfully...I just hated it. 1 Link to comment Share on other sites More sharing options...
dship Posted February 17 Share Posted February 17 5 hours ago, Billy Kingsley said: Although it rarely has uses in automotive, I absolutely hated the table saw. I know how to use it, I know the proper safety procedures, and I did use it successfully...I just hated it. I feel the same way with those big a-- band saws. 4 Link to comment Share on other sites More sharing options...
CarNucopia Posted February 17 Share Posted February 17 8 hours ago, demco32 said: If the insh size tools are not difficult enough, try working on this There’s a reason the words “British” and “reliable” rarely appear in the same sentence. 😁 An XJ-S with a manual is a bucket list car for me. The scarcity pretty much assures it’s a box left unchecked. Link to comment Share on other sites More sharing options...
M1842 Posted February 17 Share Posted February 17 Any of the special tools referenced in shop manuals that mean I will have to create a process using what tools I have. 4 1 Link to comment Share on other sites More sharing options...
demco32 Posted February 17 Share Posted February 17 3 hours ago, CarNucopia said: There’s a reason the words “British” and “reliable” rarely appear in the same sentence. 😁 An XJ-S with a manual is a bucket list car for me. The scarcity pretty much assures it’s a box left unchecked. The V-12 engine is a good engine and can go for many miles when properly maintained . An XJ-S is difficult to find with manual transmission , most have been sold in western Europe. You need special tools to remove a cylinder head and a lot of patience if this work needs to be done. A tool that I don't like to use because it means that the owner has not done proper maintenance on the car. 2 Link to comment Share on other sites More sharing options...
31Buick96S Posted February 17 Author Share Posted February 17 13 hours ago, JamesR said: Great post! Here's the tool I don't use nearly as much as I should: HAHA! I often forget to use this tool! 2 Link to comment Share on other sites More sharing options...
arcticbuicks Posted February 17 Share Posted February 17 i find its sometimes the order too.....using my hands before my brain ....or not having them working together 2 Link to comment Share on other sites More sharing options...
JACK M Posted February 17 Share Posted February 17 Well, I have a set of the tiniest screwdrivers you could imagine. They are for fixing glasses. They came in a tiny plastic box, the box is 1 5/8" by 1". I keep it in my desk drawer. Trouble is I can't see to use them without my glasses on. GRRRR 6 Link to comment Share on other sites More sharing options...
CarNucopia Posted February 18 Share Posted February 18 (edited) 8 hours ago, demco32 said: The V-12 engine is a good engine and can go for many miles when properly maintained . An XJ-S is difficult to find with manual transmission , most have been sold in western Europe. You need special tools to remove a cylinder head and a lot of patience if this work needs to be done. A tool that I don't like to use because it means that the owner has not done proper maintenance on the car. My dad had one ages ago. He never had a problem with the engine. And wow, it was silky smooth. It seemed as though just about everything else on the car failed. We didn't get the early V12 manual cars, only later straight 6 with stick. I'd guess maybe only a few hundred made it to the US. Edited February 18 by CarNucopia (see edit history) Link to comment Share on other sites More sharing options...
plymouthcranbrook Posted February 18 Share Posted February 18 I always was scared to death of the radial arm saw I purchased from a friend. I never really seemed to be able to cut much with it without shooting at least one piece around the room. I finally gave it away and haven’t missed it since. 1 1 Link to comment Share on other sites More sharing options...
Frank DuVal Posted February 18 Share Posted February 18 Radial arm saws were considered so dangerous there is still a $50 bounty on the motor paid by Emerson Electric, used on Sears Craftsman saws. http://www.radialarmsawrecall.com/ 2 Link to comment Share on other sites More sharing options...
3macboys Posted February 18 Share Posted February 18 10 minutes ago, Frank DuVal said: Radial arm saws were considered so dangerous there is still a $50 bounty on the motor paid by Emerson Electric, used on Sears Craftsman saws. http://www.radialarmsawrecall.com/ Hmmmm.....I wonder how many times you can collect that 50 bucks. Might be a whole new sideline buying them off Marketplace and Kijiji 1 Link to comment Share on other sites More sharing options...
Mr. Don Posted February 18 Share Posted February 18 Home depot uses radial arm saws still. But for hobbyists a modern "Chop saw", from one of the better brands is the better way to go. Generally speaking, avoid all tools that try to do all things. Link to comment Share on other sites More sharing options...
demco32 Posted February 18 Share Posted February 18 4 hours ago, CarNucopia said: My dad had one ages ago. He never had a problem with the engine. And wow, it was silky smooth. It seemed as though just about everything else on the car failed. We didn't get the early V12 manual cars, only later straight 6 with stick. I'd guess maybe only a few hundred made it to the US. it all comes down to correct and good maintenance to avoid any problems. many mechanics do not know how to maintain these cars correctly. 1 Link to comment Share on other sites More sharing options...
Larry Schramm Posted February 18 Share Posted February 18 I have a radial saw and I use it all of the time. Very handy for cross cutting wood. I have a table saw for long cuts. I believe that the big issue is to keep the stop/fence in good condition and be careful by keeping your hands and fingers away from the moving saw blade. Also it helps to keep a sharp blade. A dull blade tends to bind and cause not nice action. Remember that it is tough to teach common sense which is very uncommon today. 3 Link to comment Share on other sites More sharing options...
Frank DuVal Posted February 18 Share Posted February 18 (edited) 16 hours ago, Larry Schramm said: Remember that it is tough to teach common sense which is very uncommon today. The recall is back from when people had common sense. And it was common sense to remove the guard to see the blade better.😮 I once used my neighbors RAS (without guard) with him, my father and a friend of mine in the garage. I did a cut, all three other people screamed. I said "what?". I still have no idea how close I was to loosing a body part, the cut action looked fine to me. I agree to a guard and stop fence and keeping hands away, no small pieces being cut should go a long way to safe operation of a RAS. I now use a sliding compound miter saw for the last 20+ years. And I've learned these do not like small pieces either!😮 You can collect a recall check for every saw which you follow the instructions to get the money. And yes, people do pick up free RASs just to collect the recall. I read about these on woodworking/building forums.😉 ❄️❄️❄️☃️🛠️☃️🛠️ Edited February 19 by Frank DuVal (see edit history) Link to comment Share on other sites More sharing options...
Mr. Don Posted February 18 Share Posted February 18 I should have said, a "sliding compound miter saw" as that is really what I meant. "Chop saws" are usually limited to simply cutting off or through, squarely. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now