ckowner Posted June 9, 2020 Share Posted June 9, 2020 hi dpcdfan Would you be able to help me out with sidemount wheel locks and a clamp for my 1930 DeSoto coupe. Same parts as Plymouth I believe. I have posted pictures under "DeSoto" and parts wanted Thanks for your help Rick Link to comment Share on other sites More sharing options...
dpcdfan Posted June 9, 2020 Author Share Posted June 9, 2020 13 hours ago, ckowner said: hi dpcdfan Would you be able to help me out with sidemount wheel locks and a clamp for my 1930 DeSoto coupe. Same parts as Plymouth I believe. I have posted pictures under "DeSoto" and parts wanted Thanks for your help Rick Hi Rick, I didn't get anything like that in this parts load, but it seems like I have a 30 Desoto fender with this unit on it in my storage yard. I'll go over there and check this week. I have tons of Chrysler product California rust free sheet metal from 1928 on up. Regards, Gary Link to comment Share on other sites More sharing options...
ckowner Posted June 10, 2020 Share Posted June 10, 2020 Hi Gary Thanks for your response. I did manage to separate the lock assembly, so the only parts I need are the lock cylinder/pins. I am also looking for one more wheel clamp as shown in picture. regards Rick Link to comment Share on other sites More sharing options...
Skip Thornbrook Posted June 12, 2020 Share Posted June 12, 2020 Do you have any interior door handles that fit on a square mount that look halfway decent. I just bought a '29 Model U and the carrier broke a handle? Link to comment Share on other sites More sharing options...
davemarlowe552@gmail.com Posted June 14, 2020 Share Posted June 14, 2020 I have handles that were on my 1931 Plymouth PA Sedan 1 Link to comment Share on other sites More sharing options...
Graham Goetze Posted June 14, 2020 Share Posted June 14, 2020 Hi Dave. I'd be very interested in buying those handles for my PA Rumble Seat Coupe that I'm busy restoring. Regards, Graham Link to comment Share on other sites More sharing options...
davemarlowe552@gmail.com Posted June 14, 2020 Share Posted June 14, 2020 Hi Graham. How many handles do you want. I have 4. All in very good condition. Would look to get $30 each plus shipping. Let me know. Dave Link to comment Share on other sites More sharing options...
Graham Goetze Posted June 15, 2020 Share Posted June 15, 2020 Hi Dave. Yes that would be fine. I As it's a coupe I need one locking drivers side and one non-locking passenger side. I also need a locking trunk handle if you have. I'd probably get you to send to a friend in S. Carolina who comes to Cape Town regularly. Whereabouts are you? My email address is grahm.goetze@telkomsa.net Regards, Graham Link to comment Share on other sites More sharing options...
davemarlowe552@gmail.com Posted June 15, 2020 Share Posted June 15, 2020 I live in metro Detroit area.. I just have one locking handle and the other three regular. Away from home for couple of days but will get shipping plus the $60 total to you on Thursday. You can send me check and then will send out.. My address is 36860 Sunnydale, Livonia. Michigan. 48154. DAVE Marlowe. Talk to you Thursday. Link to comment Share on other sites More sharing options...
classiccarjack Posted June 16, 2020 Share Posted June 16, 2020 On 4/5/2020 at 4:51 AM, dpcdfan said: I recently bought seven cars, mainly Chrysler products, out of long term storage in an enclosed shed. Most of the cars and parts were put in there over 40 years ago and sealed up. In the group I purchased a 31 Plymouth Model PA roadster with a ton of spare parts, some of which interchange with 32 Plymouth PB and 31-32 Desoto. I’m just beginning to remove the parts from the building and both the car and extra parts will be for sale as I sort through everything to make sure the roadster is complete. what a find!!! Link to comment Share on other sites More sharing options...
Canadian PB Kid Posted June 17, 2020 Share Posted June 17, 2020 On 5/27/2020 at 4:28 PM, dpcdfan said: Allan... Good eye!! Yes, the 31 roadster is rock solid. It was in the process of being restored when my friend bought it and put it away in the shed. Agreed, the car looks rock solid, in the same picture of parts with the tail light bracket there are three windshield support brackets, the lower one in the picture appears to have the windshield pivot clamping blocks in it, I have two of them but four are required per car....would they be something you'd be willing to ship to Canada? Thanking in advance, Dave Link to comment Share on other sites More sharing options...
Mr. D Posted July 22, 2020 Share Posted July 22, 2020 I'm looking for the passenger rear fender for a 1931 desoto sa sedan. anything like that in the pile? Link to comment Share on other sites More sharing options...
dpcdfan Posted July 22, 2020 Author Share Posted July 22, 2020 11 hours ago, Mr. D said: I'm looking for the passenger rear fender for a 1931 desoto sa sedan. anything like that in the pile? Should have one. I'll check thru the parts. Link to comment Share on other sites More sharing options...
Mr. D Posted July 23, 2020 Share Posted July 23, 2020 I'm looking for the passenger rear fender for a 1931 desoto sa sedan. anything like that in the pile? Link to comment Share on other sites More sharing options...
Mr. D Posted July 23, 2020 Share Posted July 23, 2020 Sweet! I did some preliminary body work on the smashed up one, just in case I can't find a replacement. I can do measurements and look at the bolt holes to see if what you have will fit a 31 sedan. Link to comment Share on other sites More sharing options...
yardboss547 Posted September 3, 2020 Share Posted September 3, 2020 I'm looking for some rear fender for a 31 Plymouth PA. Looks there is some in the pictures. 41seven eight 30 0ne 1 63 Link to comment Share on other sites More sharing options...
32plywood Posted September 6, 2020 Share Posted September 6, 2020 fenders for coupe or sedan??? Link to comment Share on other sites More sharing options...
TimMuldoon Posted September 6, 2020 Share Posted September 6, 2020 Amazing and good for you! Link to comment Share on other sites More sharing options...
Tex 49 Posted December 24, 2020 Share Posted December 24, 2020 I am looking for a drivers side door latch for a 1928 Chrysler Model 72. Thanks Tex49 Link to comment Share on other sites More sharing options...
dpcdfan Posted December 27, 2020 Author Share Posted December 27, 2020 On 12/24/2020 at 9:07 AM, Tex 49 said: I am looking for a drivers side door latch for a 1928 Chrysler Model 72. Thanks Tex49 Closed car or roadster/touring? Link to comment Share on other sites More sharing options...
huey Posted August 6, 2021 Share Posted August 6, 2021 wow nice find! if there's any 31 imperial stuff i would be interested Link to comment Share on other sites More sharing options...
broker-len Posted August 8, 2021 Share Posted August 8, 2021 Looking for lower crank pulley and a PA manifold Link to comment Share on other sites More sharing options...
racertb Posted January 26, 2022 Share Posted January 26, 2022 Are there any of these parts left? Looking for door hinges for my roadster. I have a 29 Plymouth. Link to comment Share on other sites More sharing options...
Brian1931Plymouth Posted February 19, 2022 Share Posted February 19, 2022 Do you have any spare 31 Plymouth roadster parts for sale? Link to comment Share on other sites More sharing options...
Soupiov Posted February 19, 2022 Share Posted February 19, 2022 Looking for side mount wheel hold down for my 30-U. Link to comment Share on other sites More sharing options...
Oldsoul58 Posted March 6, 2022 Share Posted March 6, 2022 Hi, I am looking for a 1931 Plymouth model PA radiator cap. Would you happen to have one in all those parts? Thanks. Link to comment Share on other sites More sharing options...
dpcdfan Posted March 6, 2022 Author Share Posted March 6, 2022 2 hours ago, Oldsoul58 said: Hi, I am looking for a 1931 Plymouth model PA radiator cap. Would you happen to have one in all those parts? Thanks. Hi, Sorry, I don't have any extra "flying lady" hood ornaments, but may have a standard radiator cap. Link to comment Share on other sites More sharing options...
Vincent adams Posted May 5, 2022 Share Posted May 5, 2022 Hi I have a 31 Plymouth PA4 door Sedan never restored and I and I overheated the engine do you know where I can get another engine to keep it stock and do you know where I can get a front a front Fender spare tire holder and a rear luggage rack Vince Link to comment Share on other sites More sharing options...
hotrodharley891 Posted November 22, 2022 Share Posted November 22, 2022 do yo still have any parts left? Link to comment Share on other sites More sharing options...
dpcdfan Posted November 22, 2022 Author Share Posted November 22, 2022 Hi, Still have lots of 31-32 Plymouth parts. What did you need? Regards, Gary Link to comment Share on other sites More sharing options...
Soupiov Posted November 24, 2022 Share Posted November 24, 2022 Looking for the windshield riser mechanism for my 30-U if you have one. Link to comment Share on other sites More sharing options...
dpcdfan Posted November 29, 2022 Author Share Posted November 29, 2022 On 11/23/2022 at 4:04 PM, Soupiov said: Looking for the windshield riser mechanism for my 30-U if you have one. I'm pretty sure this is the one you're looking for. $100 plus shipping. Link to comment Share on other sites More sharing options...
Soupiov Posted December 1, 2022 Share Posted December 1, 2022 That's what I am looking for. I will try to send you an email, thanks Link to comment Share on other sites More sharing options...
dpcdfan Posted December 1, 2022 Author Share Posted December 1, 2022 16 hours ago, Soupiov said: That's what I am looking for. I will try to send you an email, thanks Hi Val, Sent you an email. Regards, Gary Link to comment Share on other sites More sharing options...
UKDeltMcGoo Posted October 8, 2023 Share Posted October 8, 2023 DPCDFAN, I have a '31 Roadster. I am looking for taillights, Rear bumpers, and gauges. Do you have any of these available? ramcgoo@gmail.com Thanks! Link to comment Share on other sites More sharing options...
UKDeltMcGoo Posted October 8, 2023 Share Posted October 8, 2023 DPCDFAN, I have a '31 Roadster. I am looking for taillights, Rear bumpers, and gauges. Do you have any of these available? ramcgoo@gmail.com Thanks! Link to comment Share on other sites More sharing options...
broker-len Posted October 11, 2023 Share Posted October 11, 2023 (edited) Lo Edited October 11, 2023 by broker-len // (see edit history) Link to comment Share on other sites More sharing options...
RAMcGoo Posted February 1 Share Posted February 1 I need a set of rear bumpers. If available please let me know. ukdeltmcgoo@icloud.com Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now