Jump to content

32plywood

Members
  • Content Count

    237
  • Joined

  • Last visited

Everything posted by 32plywood

  1. vintageglass.com--- talked to them this week and asked about glass for my car they told me they do have the patterns for 31 PA convertible and would be glade to cut them for me --- check them out --Allan
  2. I wish it was my car -- this car was restored and owned by Paul Curtis did it about 10 years ago --out standing car. My car is all apart in every corner of my shop. When is a good time to give a call??
  3. sorry picture is of a 1930U -- see how the lower landau pin is high on the 1/4 the PA mounts in belt line
  4. Also the seals or run tracks are very interesting and different size than normal --- front one is very odd shaped --- we need to talk
  5. the set I have are 251/4 center to center --I copied a set from a friends car and it was a 31PA --- the set on ebay are marked as 20 center to center I think that maybe correct for a 30U car ---they mount in different location and are shorter --- pull up pictures of both cars and see how they are mounted -- what is your location?? You can PM me if you like -- Allan
  6. looks like you found a set of landau irons -- I looked for years never found a set -- finely had some cast and finished a set--what is the total overall center to center on mounting holes. Over the years I found sets but never the correct overall length. started to wonder if they made them to fit each car one set at a time --Allan
  7. the glass has a metal frame around it -- that is fastened to the lower channel by 3 small screws total of six - it incases the glass pane -- not sure what you mean about front and rear seal --picture of what you have would help me to see -- been working on mine for many years and it has been slow but getting their.--Allan
  8. I need most of the wooden top bows for mine --- the one I need the most is the one over the middle --- Allan
  9. that motor has poured bearings and will need a good machine shop to do the work.
  10. yes this is a roadster --- this car was part of the group pulled from storage after 25 years. it was all apart and Gary put the cars together to sell. I went out to look at the convertible coupe he had and also looked at this roadster before he sold it . I think he still has the convertible last I talked to him. Both cars need to be restored. Allan
  11. Sorry --- do you have the roadster or convertible
  12. I live in Iowa near Des Moines --- I took lots of pictures and will be glad to help -- I could use top wood made and or patterns from someone's old set to do new wood for mine. I may have springs for upper rumble seat --- may be able to help id parts as I have been working on the PA cars for a long time ---- could you put up a picture of the car --AK
  13. did you get the one Gary had --- it is the car in this thread ----- I have a 31PA convertible and I drove out to look at Gary's car---Allan
  14. outstanding --- crib mechanics work of art
  15. I did go and after the on line stuff we got to buy from boxes --bought some hard to find good parts for my 31/32 PA cars. I thought the buy of the day was the 32 DeSoto custom convertible sedan. most car had many incorrect parts and most needed lots of work none ran.
×
×
  • Create New...