JamesR Posted January 1, 2020 Share Posted January 1, 2020 (edited) Not mine. I have no idea if this is a good deal or not, and I don't know anything about these, but I thought someone here might have interest in something unique like this. From this one picture I saw, it doesn't look to be a rust bucket. It's in Iowa. RARE 1941 Plymouth 1/2 Ton Pickup Project - cars & trucks - by dealer - vehicle automotive sale Edited January 1, 2020 by JamesR (see edit history) 2 Link to comment Share on other sites More sharing options...
TerryB Posted January 1, 2020 Share Posted January 1, 2020 Plymouth pickups are indeed rare, I believe the first ones were 1937. 3 Link to comment Share on other sites More sharing options...
Mikefit Posted January 1, 2020 Share Posted January 1, 2020 Yes 2 of the Plymouth picks showed up at our local car show last summer think 37or 38 neither the guys know each other at the time Link to comment Share on other sites More sharing options...
Mikefit Posted January 1, 2020 Share Posted January 1, 2020 Just looked at the picture the 2 Plymouth p u must have been older as the head lights were mounted from the radiator and not the fenders Link to comment Share on other sites More sharing options...
TerryB Posted January 1, 2020 Share Posted January 1, 2020 9 minutes ago, Mikefit said: Just looked at the picture the 2 Plymouth p u must have been older as the head lights were mounted from the radiator and not the fenders 1937 and 1938 Dodge were both radiator mounted, I had a 1937 Dodge pu. I believe Plymouth used the same mounting in those years. Link to comment Share on other sites More sharing options...
mercer09 Posted January 2, 2020 Share Posted January 2, 2020 I have a 37 plymouth truck title. only one and yes, they are pretty rare. dodges were abundant Link to comment Share on other sites More sharing options...
dodgebrother Posted January 2, 2020 Share Posted January 2, 2020 (edited) Nice truck. And they were a low number build. With the VIN you can do a search and it is possible to get the build card. The nose piece is similar to a Fargo which were the same from 39-47. The stainless strips on the grill bars are the same for Fargo. All the parts one would need for a restoration are available from any supplier of 39-47 Dodge truck parts. Except the hood badges and the vertical stainless strip down the center of the grill. In saying that I would almost bet that vertical piece is the same as a Fargo just the badge is different. There have been a few Plymouth trucks for sale up this way. Probably the rarest piece with your truck and almost impossible to find is that original tailgate. That was the first thing to get tossed or placed in the barn or garage that never saw daylight again. So for that price it is fair and a good candidate for restoration. By the way track down Eric Bannerman on here. He can probably give you some good intel from the VIN. Also I highly recommend his book. Good Luck Edited January 2, 2020 by dodgebrother (see edit history) Link to comment Share on other sites More sharing options...
JACK M Posted January 2, 2020 Share Posted January 2, 2020 Ad says he doesn't want any help selling. Link to comment Share on other sites More sharing options...
dodgebrother Posted January 2, 2020 Share Posted January 2, 2020 So who is offering to help sell it? I just offered some comment to anyone looking at it. What are you bored and just need to say something? 1 Link to comment Share on other sites More sharing options...
JACK M Posted January 2, 2020 Share Posted January 2, 2020 Easy friend, I was making a little joke. There are often postings of cars for sale here that are posted because a member thinks that there may be interest. I doubt the seller would have problems with that. Bored? No, I was looking at the truck and read the ad. Link to comment Share on other sites More sharing options...
dodgebrother Posted January 2, 2020 Share Posted January 2, 2020 Fair enough....... Have a great day and all the best in the New Year...! 1 Link to comment Share on other sites More sharing options...
JamesR Posted January 2, 2020 Author Share Posted January 2, 2020 (edited) I presume those pods in front of the doors would've been front turn signals. I just thought: Wouldn't they have been aftermarket in '41? Interesting someone would've robbed the truck of the lenses and bulbs off the signals rather than the whole signals themselves. But then I googled images and found the pods on all the trucks I saw. Weren't factory turn signals uncommon on 1941 vehicles? Especially pickup trucks? I just noticed that '41 Plymouth cars had turn signals, too. Chevy and Ford cars from that year have them too, but I don't think Chevy and Ford trucks do. Edited January 2, 2020 by JamesR (see edit history) Link to comment Share on other sites More sharing options...
Graham Man Posted January 2, 2020 Share Posted January 2, 2020 the tail gate is the best part.... 1 Link to comment Share on other sites More sharing options...
dodgebrother Posted January 2, 2020 Share Posted January 2, 2020 (edited) For Dodge, Fargo and Plymouth trucks 1939 - 1947. Those are called cowl lights and acted more like park lights then signal lights. No cowl lights in 39 & 40. For 39-40 headlights on fenders were inset on fenders and had small park lights on headlight bucket. Headlights went to center of fender and cowl lights added starting 1941 through to 1947. That is a really nice green Plymouth truck and the tailgate for sure is the best part. One screw on the back of the cowl light gets everything inside. the cowl light bucket is bolted to the inside of the cowl. So the lenses and bulbs and ring are easy to disassemble. In the original photo above it just looks like the lense and bulb are missing and probably got broken. Edited January 2, 2020 by dodgebrother (see edit history) 1 Link to comment Share on other sites More sharing options...
32plywood Posted January 2, 2020 Share Posted January 2, 2020 This truck is at a salvage yard in Pella Iowa --- they are good people to deal with --- not sure if you can work on the price but I think it is pretty fair ---- he has many older trucks and cars --Ak Link to comment Share on other sites More sharing options...
JamesR Posted January 3, 2020 Author Share Posted January 3, 2020 9 hours ago, dodgebrother said: For Dodge, Fargo and Plymouth trucks 1939 - 1947. Those are called cowl lights and acted more like park lights then signal lights. No cowl lights in 39 & 40. For 39-40 headlights on fenders were inset on fenders and had small park lights on headlight bucket. Headlights went to center of fender and cowl lights added starting 1941 through to 1947. That is a really nice green Plymouth truck and the tailgate for sure is the best part. One screw on the back of the cowl light gets everything inside. the cowl light bucket is bolted to the inside of the cowl. So the lenses and bulbs and ring are easy to disassemble. In the original photo above it just looks like the lense and bulb are missing and probably got broken. Thanks for the education. I didn't think that signal lights were common back then, at least from the factory. No turn signal stalk, either. Link to comment Share on other sites More sharing options...
mike6024 Posted January 3, 2020 Share Posted January 3, 2020 I've seen a Plymouth pickup like this around locally, being driven, restored but not entirely original, black. It was lowered some and with different wheels, but I wouldn't call it a hotrod. The body appeared unmolested. Link to comment Share on other sites More sharing options...
countrytravler Posted January 3, 2020 Share Posted January 3, 2020 14 hours ago, dodgebrother said: Nice truck. And they were a low number build. With the VIN you can do a search and it is possible to get the build card. The nose piece is similar to a Fargo which were the same from 39-47. The stainless strips on the grill bars are the same for Fargo. All the parts one would need for a restoration are available from any supplier of 39-47 Dodge truck parts. Except the hood badges and the vertical stainless strip down the center of the grill. In saying that I would almost bet that vertical piece is the same as a Fargo just the badge is different. There have been a few Plymouth trucks for sale up this way. Probably the rarest piece with your truck and almost impossible to find is that original tailgate. That was the first thing to get tossed or placed in the barn or garage that never saw daylight again. So for that price it is fair and a good candidate for restoration. By the way track down Eric Bannerman on here. He can probably give you some good intel from the VIN. Also I highly recommend his book. Good Luck Reproduction tail gates are available. we sold about 20 of them and they are excellent. Link to comment Share on other sites More sharing options...
CHuDWah Posted January 3, 2020 Share Posted January 3, 2020 On 1/1/2020 at 6:04 PM, TerryB said: 1937 and 1938 Dodge were both radiator mounted, I had a 1937 Dodge pu. I believe Plymouth used the same mounting in those years. Yes, grill shell mounted in 37 & 38 - fender mounted after Link to comment Share on other sites More sharing options...
CHuDWah Posted January 3, 2020 Share Posted January 3, 2020 14 hours ago, dodgebrother said: For Dodge, Fargo and Plymouth trucks 1939 - 1947. Those are called cowl lights and acted more like park lights then signal lights. No cowl lights in 39 & 40. For 39-40 headlights on fenders were inset on fenders and had small park lights on headlight bucket. Headlights went to center of fender and cowl lights added starting 1941 through to 1947. That is a really nice green Plymouth truck and the tailgate for sure is the best part. One screw on the back of the cowl light gets everything inside. the cowl light bucket is bolted to the inside of the cowl. So the lenses and bulbs and ring are easy to disassemble. In the original photo above it just looks like the lense and bulb are missing and probably got broken. I believe 39 parking lights were mounted in the headlight. That wasn't possible with the introduction of sealed beams in 1940. So they were placed in a small pod on top of the headlight bucket, then went to cowl lights in 41. Link to comment Share on other sites More sharing options...
countrytravler Posted January 3, 2020 Share Posted January 3, 2020 (edited) 7 hours ago, CHuDWah said: I believe 39 parking lights were mounted in the headlight. That wasn't possible with the introduction of sealed beams in 1940. So they were placed in a small pod on top of the headlight bucket, then went to cowl lights in 41. My 39 woth low mount headlamps. Edited January 3, 2020 by countrytravler (see edit history) 1 Link to comment Share on other sites More sharing options...
countrytravler Posted January 3, 2020 Share Posted January 3, 2020 My 39 with hi mount headlamps with no turn signal. Link to comment Share on other sites More sharing options...
CHuDWah Posted January 3, 2020 Share Posted January 3, 2020 6 hours ago, countrytravler said: My 39 woth low mount headlamps. Course that's a Dodge big truck, not a Plymouth pickup. Anyway, those look like Guide lights, which were OEM on some big trucks and also available aftermarket. I'd guess yours are the latter as they do not fit the fender stands well. The turn signal switch also looks aftermarket. The 40 Plymouth pickup lights are the same, or at least similar, so they may be one-year-only-OEM Guides used to transition to sealed beams. 6 hours ago, countrytravler said: My 39 with hi mount headlamps with no turn signal. Again, a big Dodge, not a Plymouth pickup. Anyway, are those OEM sealed beams? They look like aftermarket conversions. Link to comment Share on other sites More sharing options...
CHuDWah Posted January 4, 2020 Share Posted January 4, 2020 (edited) The 37-41 Plymouth commercial vehicles, which includes pickups, were designated the PT (i.e., Plymouth Truck) series, followed by a number that indicates model year. Pickup production: PT50 (1937) - 10,709 PT57 (1938) - 4,620 PT81 (1939) – 6,181 PT105 (1940) – 6,879 PT125 (1941) – 6,073 Total - 34,462 I guess that makes them rare. Course, being trucks, many led a hard life, were worn out, and got scrapped which makes them rarer still. The bright spot is they're pretty much clones of Dodge and Fargo trucks so finding parts for the survivors might not be so difficult. There also may be some interchangeability with passenger cars. The unobtanium would be the year/make/model-specific trim, etc. Edited January 4, 2020 by CHuDWah (see edit history) Link to comment Share on other sites More sharing options...
countrytravler Posted January 4, 2020 Share Posted January 4, 2020 Lot of the parts was shared with the big trucks and Dodge. Sheet metal is the same for the 1/2 ton except the tail gate, hood and grill. Gauges and trim between the gauges also different. Link to comment Share on other sites More sharing options...
countrytravler Posted January 4, 2020 Share Posted January 4, 2020 I never said that these were Ply trucks. Plymouth only made 1l2 ton trucks. Nothing bigger. Actually, they were not half ton, 1/4 I believe. I was just showing examples. Link to comment Share on other sites More sharing options...
countrytravler Posted January 4, 2020 Share Posted January 4, 2020 Couple at our show in CA. 1 Link to comment Share on other sites More sharing options...
countrytravler Posted January 4, 2020 Share Posted January 4, 2020 We do have a 37 Ply for sale. Need a lot of parts. 1 Link to comment Share on other sites More sharing options...
classiccarjack Posted January 23, 2020 Share Posted January 23, 2020 I have a 1938 PT57. I need a hood, tailgate, and a grill. I hope to get lucky this upcoming weekend at Turlock! Link to comment Share on other sites More sharing options...
countrytravler Posted January 30, 2020 Share Posted January 30, 2020 On 1/22/2020 at 9:53 PM, classiccarjack said: I have a 1938 PT57. I need a hood, tailgate, and a grill. I hope to get lucky this upcoming weekend at Turlock! I think that i have a hood. Ill be home last last week of March. Link to comment Share on other sites More sharing options...
classiccarjack Posted January 31, 2020 Share Posted January 31, 2020 On 1/29/2020 at 8:01 PM, countrytravler said: I think that i have a hood. Ill be home last last week of March. Thank you, please let me know. I will gladly drive out to pick it up from you. Link to comment Share on other sites More sharing options...
classiccarjack Posted January 31, 2020 Share Posted January 31, 2020 On 1/22/2020 at 9:53 PM, classiccarjack said: I have a 1938 PT57. I need a hood, tailgate, and a grill. I hope to get lucky this upcoming weekend at Turlock! I found nothing in Turlock for my projects. However, my wife faired out well. We found a set of rear fenders for her 1937 Plymouth Panel Truck and a functional aftermarket radio from the radioman. Link to comment Share on other sites More sharing options...
8E45E Posted January 31, 2020 Share Posted January 31, 2020 On 1/3/2020 at 11:45 PM, countrytravler said: I never said that these were Ply trucks. Plymouth only made 1l2 ton trucks. Nothing bigger. Actually, they were not half ton, 1/4 I believe. I was just showing examples. In Canada, there were Fargo branded trucks, sold at Chrysler-Plymouth dealers. There was a corresponding Fargo truck for every Dodge truck and van in every size and configuration up until 1972. Craig 1 Link to comment Share on other sites More sharing options...
classiccarjack Posted January 31, 2020 Share Posted January 31, 2020 1 hour ago, 8E45E said: In Canada, there were Fargo branded trucks, sold at Chrysler-Plymouth dealers. There was a corresponding Fargo truck for every Dodge truck and van in every size and configuration up until 1972. Craig Hi Craig, I have known about this, and perhaps after I restore the two I have, I may consider looking into buying a Fargo. It would be so cool to have all three brands with the same model lined up at a show for everyone to see and compare. -Jack H. Link to comment Share on other sites More sharing options...
8E45E Posted January 31, 2020 Share Posted January 31, 2020 6 minutes ago, classiccarjack said: Hi Craig, I have known about this, and perhaps after I restore the two I have, I may consider looking into buying a Fargo. It would be so cool to have all three brands with the same model lined up at a show for everyone to see and compare. -Jack H. And don't forget DeSoto. DeSoto trucks were sold in South Africa, I believe in the 1960's, and in the Middle East well into the eighties. One will also see 'DeSoto' on the data plate on a 1970's Dodge truck. Craig 1 Link to comment Share on other sites More sharing options...
classiccarjack Posted January 31, 2020 Share Posted January 31, 2020 1 hour ago, 8E45E said: And don't forget DeSoto. DeSoto trucks were sold in South Africa, I believe in the 1960's, and in the Middle East well into the eighties. One will also see 'DeSoto' on the data plate on a 1970's Dodge truck. Craig I didn't know that one... Hmmm your making my hobby more expensive! LOL I will look at my 1972 Dodge D100 to see if the data plate is there. You have my curiosity up. Thanks Craig for letting me know. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now