West Peterson Posted January 11, 2016 Share Posted January 11, 2016 Have you ever had a bolt shoot out from your wire wheel and either hit you, or something valuable behind you? This new tool is not only faster in cleaning threads, but obviously much safer. It was recently viewed at the SEMA show in Las Vegas to rave reviews. I've got a set on the way already. Since most restorers would like to reuse original bolts, I thought I'd pass on the info.http://threadwizard.us/ Link to comment Share on other sites More sharing options...
CarlLaFong Posted January 11, 2016 Share Posted January 11, 2016 I love tools but you can do the same thing with a matching nut, held in the vise and your driver or wrench and a shot of WD-40 or oil. Plus, this tool still leaves the head of the fastener untouched, so a trip to the wire wheel is still requiredOverall, I give it a 3.5 out of 10Pretty useless, IMO Link to comment Share on other sites More sharing options...
caddyshack Posted January 11, 2016 Share Posted January 11, 2016 Interesting tool, for larger threads, but I like the old fashioned way with bolt taps and dies. Engines require bottoming taps and a good vacuum. Just my $.02 worth. Link to comment Share on other sites More sharing options...
Spinneyhill Posted January 11, 2016 Share Posted January 11, 2016 I often use a thread file. The die nut takes off too much, often. And if the start of the thread is damaged it is easy to destroy the bolt. The thread file makes it easy. Mine also has a small diameter on the end to do inside the nut. I also like to use phosphoric acid of one sort or another to clean up the rust then re-plate with zinc. Cadmium would be more correct but that is a bit toxic. How long does the wire brush last inside that thing? Link to comment Share on other sites More sharing options...
West Peterson Posted January 11, 2016 Author Share Posted January 11, 2016 This tool touches all types of threads, not just the large threads. Link to comment Share on other sites More sharing options...
Bhigdog Posted January 11, 2016 Share Posted January 11, 2016 Bead blaster...... Small parts go into an old soup can with my hand held over the open end and bounce around for a minute or so................Bob Link to comment Share on other sites More sharing options...
auburnseeker Posted January 11, 2016 Share Posted January 11, 2016 You can drop them in some evaporust as well. It will clean the bolt of rust grease and all. It leaves the finish still on them unless you let them soak too long. It will eventually break down cadmium and oxide platings. Link to comment Share on other sites More sharing options...
MarrsCars Posted January 11, 2016 Share Posted January 11, 2016 I actually rather like this idea for quick, on the fly cleaning of the threads for most typical applications. Perhaps for higher level work one would prefer another method but this seems like a great compromise to me. If that little wire wheel inside is a standard size that can be acquired anywhere then all the better. I would use this for heavily greased bolts or even restoring many of the older unique bolt types we often encounter (and I always keep) when buying tool chests or cabinets for our antique business. Thanks for sharing. Link to comment Share on other sites More sharing options...
oily rag Posted January 12, 2016 Share Posted January 12, 2016 I just got done cleaning rust off a bunch of 1/2" long 10-32 round headed screws with white vinegar in a small jar, cost less than a nickel.I have also used vinegar on fuse holders, wood screws and non greasy bolts. Link to comment Share on other sites More sharing options...
JACK M Posted January 12, 2016 Share Posted January 12, 2016 A client brought me a gizmo that he bought at Harbor Freight.It was a canister that was maybe a gallon in size and had thousands of hard plastic pyramid shaped thingy's in it that were maybe about a quarter inch big. He would throw his rusty bolts in there and when he turned it on it would vibrate the rust off and leave the bolts fairly clean. I never used it but the idea looked good. Link to comment Share on other sites More sharing options...
Terry Bond Posted January 12, 2016 Share Posted January 12, 2016 Thanks West - looks interesting. Might spring for that and I have a permanent "dent" in my forehead from the old wire-brush technique. Got it working on the 1912 Triumph, where we had to try and save a lot of original hardware. Just one quick question though - when do you have time to work on cars? Let me know how you arrange that.Terry Link to comment Share on other sites More sharing options...
West Peterson Posted January 13, 2016 Author Share Posted January 13, 2016 Just one quick question though - when do you have time to work on cars? Let me know how you arrange that.TerryUsually the only time I ever get a chance to work on my car is when I'm at a show or on a tour. This winter, I made the decision to store the car in my own garage so that I could easily go into the garage and do some things. Don't ask me how that's working out so far. In regard to this thread cleaning tool, I agree that there are many other methods for accomplishing something better for restoration purposes. For me, when working on my car removing and replacing a part, and only needing a quick clean-up of the threads to put it back together, this tool would come in very handy. Link to comment Share on other sites More sharing options...
R Walling Posted January 13, 2016 Share Posted January 13, 2016 (edited) A tap and die and a wire wheel, Period Use a good pair of vise grips and make sure the guards are adjusted on the wheel. And don't forget the never seize! Edited January 13, 2016 by Roger Walling (see edit history) 1 Link to comment Share on other sites More sharing options...
AKCJ Posted January 20, 2016 Share Posted January 20, 2016 I got my thread wizard last week. It's pretty cool. Now all I need is time to work on my cars! Link to comment Share on other sites More sharing options...
Guest Saltfactor Posted January 20, 2016 Share Posted January 20, 2016 Heya Jack M,...that "gizmo" (don' get it wet, or feed it after midnight) sounds like a vibratory tumbler. They are great, and get nuts and bolts clean as a whistle. of course you have to de-grease anything you stick in the tumbler or it will crud up the abrasive media. The death of mine was overloading the thing. I generally observe instructions and owners manuals with a grain of salt,...but in this instance it would have been wise to adhere to them. Eastwood sells 'em, and so does Sears, as well as Harbour Freight. There's a pretty wide range in capacities and media. The big ones can get crazy expensive. Link to comment Share on other sites More sharing options...
MikeC5 Posted January 20, 2016 Share Posted January 20, 2016 I could maybe see spending $7 - $10 but $25? Naaa. Link to comment Share on other sites More sharing options...
Guest AlCapone Posted January 20, 2016 Share Posted January 20, 2016 I love tools but you can do the same thing with a matching nut, held in the vise and your driver or wrench and a shot of WD-40 or oil. Plus, this tool still leaves the head of the fastener untouched, so a trip to the wire wheel is still requiredOverall, I give it a 3.5 out of 10Pretty useless, IMOOne man's passion is another man's poison! Wayne Link to comment Share on other sites More sharing options...
West Peterson Posted January 21, 2016 Author Share Posted January 21, 2016 I could maybe see spending $7 - $10 but $25? Naaa.Totally agree. Link to comment Share on other sites More sharing options...
Restorer32 Posted January 21, 2016 Share Posted January 21, 2016 What would happen if you used NevrSeize and Loctite on the same bolt? Link to comment Share on other sites More sharing options...
West Peterson Posted January 21, 2016 Author Share Posted January 21, 2016 What would happen if you used NevrSeize and Loctite on the same bolt?nuclear explosion type results Link to comment Share on other sites More sharing options...
benjamin j Posted January 21, 2016 Share Posted January 21, 2016 as I take bolts, nuts, washers ect off they go into a coffee can with black strap molasses and water. two weeks later when I take them out they look like new. then I spray on some WD 40 and clean the coffee can that I used to store them because it has a description of what the bolts were for. Link to comment Share on other sites More sharing options...
CarlLaFong Posted January 21, 2016 Share Posted January 21, 2016 (edited) What would happen if you used NevrSeize and Loctite on the same bolt?You would tear a hole in the time/space continuum. There would be an anti singularity where all matter would return to an infinitely small and infinitely dense particle Edited January 21, 2016 by CarlLaFong (see edit history) Link to comment Share on other sites More sharing options...
Restorer32 Posted January 21, 2016 Share Posted January 21, 2016 Cognitive dissonance at its finest. Link to comment Share on other sites More sharing options...
JACK M Posted January 21, 2016 Share Posted January 21, 2016 as I take bolts, nuts, washers ect off they go into a coffee can with black strap molasses and water. two weeks later when I take them out they look like new. then I spray on some WD 40 and clean the coffee can that I used to store them because it has a description of what the bolts were for. I like the molasses treatment as well. I have done it may times and is way cheap. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now