rowan782 Posted February 17, 2018 Share Posted February 17, 2018 (edited) Haven't a lot of experience, need to load a 1958 Pontiac onto an open trailer. it has no front wheels because no spindles. Seller had to use his forklift in another state. Trailer has a good Warn winch. Other than renting some kind of motorized lifter (tractor with front end loader or forklift ??) any good hillbilly ideas? Edited February 17, 2018 by rowan782 (see edit history) Link to comment Share on other sites More sharing options...
72caddy Posted February 17, 2018 Share Posted February 17, 2018 Wheel dollies. If they can hold the weight with the wheels on they should hold the weight without wheels. Link to comment Share on other sites More sharing options...
28 Chrysler Posted February 17, 2018 Share Posted February 17, 2018 The 4 wheeled car dollies that normally go under the wheels should work.Move the car under a tree and lift the front up , back the trailer under it. 1 Link to comment Share on other sites More sharing options...
rowan782 Posted February 17, 2018 Author Share Posted February 17, 2018 Thanks guys Link to comment Share on other sites More sharing options...
60FlatTop Posted February 17, 2018 Share Posted February 17, 2018 (edited) It will skid on almost anything. If you put down a couple 4X4 sheets of plywood it will dig in and slide the plywood, protecting the trailer deck. An old hood or trunk lid will work, too. Don't overthink the job. My son and I pushed my tractor with a bucket loader into my garage with a 4X4 under the bucket. He asked what happens when you get to the end, I said we jack the bucket and slide it out. Turned out the edge of the bucket dug into the 4X4 and we rode it all the way. Just push it. The two most dangerous words in the English language are "I thought." Overthink it and you will be sitting there with a big mess and the first two words you hear will be "I thought" I dare you to keep track of what happened right before you hear those words. Bernie Edited February 17, 2018 by 60FlatTop (see edit history) 1 1 Link to comment Share on other sites More sharing options...
61polara Posted February 17, 2018 Share Posted February 17, 2018 I've used a floor jack also, but I like the idea of the plywood. Link to comment Share on other sites More sharing options...
1937hd45 Posted February 17, 2018 Share Posted February 17, 2018 Some junk yard must have a cheap rear axle and wheels & tires out of a FWD minivan, redneck attach it under there like the garden cart axle I used on a chassis. Bob 1 Link to comment Share on other sites More sharing options...
Stude Light Posted February 17, 2018 Share Posted February 17, 2018 6 hours ago, 60FlatTop said: Just push it. The two most dangerous words in the English language are "I thought." Overthink it and you will be sitting there with a big mess and the first two words you hear will be "I thought" "Hold my beer and watch this" are the words that come to mind. Being a helicopter pilot, I would suggest..... Better yet, I like the plywood idea. 1 Link to comment Share on other sites More sharing options...
60FlatTop Posted February 17, 2018 Share Posted February 17, 2018 1 hour ago, 1937hd45 said: Some junk yard must have a cheap rear axle and wheels & tires out of a FWD minivan, redneck attach it under there like the garden cart axle I used on a chassis. Bob That looks like a Mercedes frame in the background. If it is......... Link to comment Share on other sites More sharing options...
Digger914 Posted February 18, 2018 Share Posted February 18, 2018 Four wheel dollies are good for towing but they are wider than the average car trailer bed. On solid ramps wheel dollies have trouble where the ramps meet the ground and the bed. If you have a ramp style trailer and a good strong winch 4x4 skids will help you get it on and get it off. Having done the hold the beer and watch this, don't forget the beer. You might just need to get a couple of big crazy people to help. Link to comment Share on other sites More sharing options...
Zimm63 Posted February 18, 2018 Share Posted February 18, 2018 I grew up around some "hold my beer" guys. Still makes my hair stand on end when I hear somebody say it. Ended up with a trip to the ER too many times. Link to comment Share on other sites More sharing options...
nearchoclatetown Posted February 18, 2018 Share Posted February 18, 2018 Jack it up high enough to get the trailer under it and block it as far back as you can. Back the trailer under until it gets to your blocking, then go to the plywood. Link to comment Share on other sites More sharing options...
Trulyvintage Posted February 18, 2018 Share Posted February 18, 2018 (edited) 10 hours ago, rowan782 said: Haven't a lot of experience, need to load a 1958 Pontiac onto an open trailer. it has no front wheels because no spindles. Seller had to use his forklift in another state. Trailer has a good Warn winch. Other than renting some kind of motorized lifter (tractor with front end loader or forklift ??) any good hillbilly ideas? Load it rear end first - have a forklift or a piece of equipment lift the front end while you pull it on the trailer using the winch - unload in the same manner. Jim Edited February 18, 2018 by Trulyvintage (see edit history) 1 Link to comment Share on other sites More sharing options...
mike6024 Posted February 18, 2018 Share Posted February 18, 2018 Plywood. Two layers. One sticks to vehicle. Other sticks to the ground/ramps/inside floor of the trailer. 1 Link to comment Share on other sites More sharing options...
1937hd45 Posted February 18, 2018 Share Posted February 18, 2018 (edited) 14 hours ago, 60FlatTop said: That looks like a Mercedes frame in the background. If it is......... No, Just another 35-40 Ford X member just like the one in the wire wheeled chassis. Mean while back to the OP spindleless car problem, are you using your trailer or a friends? Ever have a 354 Chrysler HEMI and cast iron transmission fall through a wood deck trailer? Bob Edited February 18, 2018 by 1937hd45 (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now