pont35cpe

There is most likely at least 100,000mi on top of the 28,239. Interior looks moldy.

Skidplate, i bought a set of Chevy beauty trim rings for my `36 Buick 40series artillery wheels. The Chevy ones are not as deep as the Buick ones, they`ll fit, but there is a 1/4" gap at the back. Most people will not notice the difference.

Do you realize the assembly is laying upside down..Buick wheels were mounted with bolts back then.

Carnut, i don`t know if the brackets you`re looking for might be same/similar to a `37 Buick. Call Dave Tacheny 763 427 3460 4-7pm central M-F He parts out mid to late `30s Buicks..

Fasteners & Hardware for 1929-41 GM vehicles.. Rex Weber owner. Anyone familiar with this? It may be a thing of the past. Anyone know if the business closed, or if someone else took it over?

Guessing.. `40s-early `50s Buick

Agree with Str8-8-Dave. Those plastic Quadrajet floats were bad about getting saturated, and not as buoyant as they should be. Being rebuilt, dosen`t mean the re-builder installed a new float.

Mine was "our records show item delivered".. I`d bought an item for a 36 Buick, tracked it from the start, to "delivered in/at mailbox". "Item" in my mail box, was a piece of a cardboard box with my name/address on it, stuffed inside of a zip lock baggie..

I can`t find anything from `28, only early `30s. 1930-1934: Right side of rear crossmember or under left front fender

May have been registered with the engine number..

Correct..

1982 S-10, bought new 18Dec`81. Original weak suck 2.8 died at 64,000mi. On my 3rd 4.3 now with 700R4OD. Currently 954,040mi.

I don`t think this type would fit on a `36 Buick bumper, too much radius on the top and bottom of the bumper. Looks like it is made for a flat faced bumper.

Space Coast.. https://tampa.craigslist.org/pnl/cto/d/saint-petersburg-1938-bantam-roadster/7697104223 Are the tail lights original? They look like `37-`38 Oldsmobile 6cyl tail lights.

These? https://bobsautomobilia.com/shop/hood-items/hood-corner-pocketed-pads-

That guard looks similar to a `38 Buick, maybe taller. What car are you wanting it for? Needs to fit contour of bumper.

1941 Pontiac, yes..

The later engine in the car dose not have the rear engine mounts. Engine on the tire is the correct engine for the `35 convert.

My `35 8cyl has a port on the top of the intake manifold, located about where the blunt end of your red arrow is.

Overheating.. I suspect your flat-head engine may have a water distribution tube, have you checked for one, or what`s left of one? Located in the block behind the water pump.

Tail lights don`t match `48 Pontiac, looks like a `48 Chevy body and tail lights, or is that a difference of Canadian/USA built. Is the engine overhead or flathead?

Yes, 1957 Pontiac and Rin-Tin-Tin..

1935 Pontiac rear tail light cans, also have a red lens in the bottom. Another, what`s the purpose?

Head lights? Need to state which series.