Search the Community
Showing results for tags 'wanted - parts'.
-
Require some tech tips and engine parts for this vehicle. To change from cast bearings to slipper Bearings. Have been told that the Chevy 34 & 35 should have same bearings. Is it possible to change from cast bearings to slipper bearings at 30 thou as the crankshaft requires grinding. If this is the case then can anyone direct us to a shop that would have the parts including a set of main bearings at 040 thou.
-
Have a friend in Germany looking for this part, anybody have one they are willing to sell and ship to him? Or ship to me and I will ship to him. Here is a listing for it, but it is apparently out of stock. https://jcaparts.com/collections/bu...ozadnRPVOR6aBIKHK-Efg_N8IEtFhKF3Q7BTgIA7XFCsw
-
looking for a wiper delay switch for a 1973 Buick Regal ..car only has factory single speed switch, i know ill have to buy new wiper motor with delay option
-
Looking for the spacers and bolts for front bumper wing guards -
Hello, Has anyone got a hood hinge strip or knows anyone who sells them? I did get hold of a Ford 50" length but that has parallel side and Stude tapers towards the front grill. I'm facing trying to make one but that is fraught with difficulties as the metal is thin and will warp easily. Thanks, Steve -
I've dug out an old 1930 Franklin sidedraft engine, and its missing several parts. Starter and valve covers seem like the toughest missing bits to fabricate. Any leads? Could also use one intake rod / housing, a couple valve retainer clips. Or just an entire donor engine. I also have an old box of parts, including a complete Atwater Kent 5970 Generator for series 10 if that might sweeten the pot for someone.
-
Im looking to buy a correct (new or used) battery for my 1964 Corvair Monza Spyder. I believe its an out of production Group size 53 Delco. Any help would be appreciated. Thank you!
-
I am looking for very nice to NOS or restored brass top Champion spark plugs with red lettering (not the orange letters that some have). If you have any, please send PM with pictures and price.
-
Hello I am looking for a 1964 413 hp motor, top stamping V41 HP . My understanding was they were optional in 300's, standard in 300K non ram cars and also came in Newports with the police package. A complete engine would be prefered, but will look at anything starting with a bare block Thanks, Ed
-
Have a friend in Germany looking for this part, anybody have one they are willing to sell and ship to him? Or ship to me and I will ship to him. Here is a listing for it, but it is apparently out of stock. https://jcaparts.com/collections/bu...ozadnRPVOR6aBIKHK-Efg_N8IEtFhKF3Q7BTgIA7XFCsw
-
I`m in search of a `37 Oldsmobile 8cyl coupe LH tail light assembly 920777
-
Need one that is functional OR one I can use to send in and get restored (preferably one that is good). Non-AC (not sure if that matters on this one). -
Looking for OEM or repro rubber floor mats with logo for 1952 International (IH) L130 truck. Please call four one five four five seven 3721. Thanks! Alan
-
Need replacement points set!
-
need tail lights for 1955 chry. new yorker
-
Trying to help a friend in Costa Rica with his restoration. Looking for a water pump or leads to vendors/ junkyards that might have one. Thank you. -
I am looking for the original metal fuse holders for my 47 Chrysler, does anybody know where i could locate them? Regards Bruce -
Hello, i am looking to get in into the automobile hobby and i am looking for my first car. I have some particular makes, models, and years in mind...however i'm open to anything (including alternative engines and fuel...steam, electric, ext). Thank you for all your leads or support...
-
Looking for a few parts for the 1965 Sport wagon I recently bought. Looking for: left hand tail light lense right hand tail light right side vista glass with dark tint handle/ knob for the release lever on the passenger rear seat Thank you for looking, Loren
-
finally starting work on a model 35. Looking for parts, info and encouragement Need Right front fender. The Splash apron under rad shell. Dash Gages and reading light. Would like to collect pictures of a complete car for comparison and parts inventory there is a lot more parts missing On the good side. Chassis and running gear are in great shape for such an old machine. Last ran about 40years ago. Wheels are being redone and the body wood is scheduled to begin in Ma
-
Hi looking for starter or armature for stater also crank handle
-
I am desperately searching for steel left front fender, hood, and left panel below the hood to the fender for a 1937 Ford tudor Model 74 sedan. If anyone can help me I would be most grateful. Thank you in advance for your time and help. -
Trying to replace 2 tubular rear shocks on an old hot rod built in 59. Year/make application chart won't help on this modified arrangement. One is marked : Autolite AJ18U60B REAR The other is marked 4146429 REAR Both have ford script logos logos stamped on the housings I've tried monroe and other cross references with no luck. Maybe someone could refer a outfit that stocks a lot of old NOS or NORS shocks-Thanks in advance
-
Need to find a 248 straight eight intake manifold for 1949 or any other year that has the bolt holes & ear for attaching the throttle linkage at the rear (see photo). Needs to be for a 3-bolt carburetor. Also missing the gas filler door for this '49 I am trying to finish up. Any help appreciated. Pete Phillips, BCA #7338 Leonard, TX -
Hi all, I’m looking for the tail lights for a 1948 Chrysler Windsor. The driver’s side is broken, the passenger side is good though. Here’s a pic of what it looks like. Thanks a bunch!
