Search the Community
Showing results for tags 'for sale - parts'.
-
I have a good 1929 chevy coupe frame. I was told it was a coupe frame any offers kenny
-
Good looking radio for some Chrysler products of the late 1940's I think. I hooked it up to a battery and it hums and the station selector and volume control work well. I did not have an antenna so can't say if it picks up stations or not. $55 plus shipping.
-
I have 6 of these with center caps.... the centers are not the best but they are there...I can send better and more pictures from my phone alot easier..... (360)886-4778 josh Shipping from Oregon.... Asking $950 or best offer ..... Thanks -
2 bbl bendix stromberg carb. Worked fine when removed from 99k mile car, but should probably rebuild. Air cleaner will need to be repainted but is dent/crack free. Comes with choke heat tube and vacuum advance pipe. I can send more pics upon request. $250obo for all plus shipping.
-
No need to have your 1939 BUICK temperature gauge repaired or cosmetically restored. Here is an NOS '39 BUICK temp gauge, still in the original packaging. Complete, as shown, with bulb and square nut. Fits all series. The price is $150, plus the shipping.
-
This is the spoon-type clamp that holds the trunk-mounted spare tire in place. For all series 1938-1940 BUICK's, without sidemounts. Has surface rust, but otherwise in good condition. The price is $22, plus shipping.
-
For 1939 BUICK, 40 and 60 series. This clamp affixes the trunk luggage board to the hole in the center of the spare tire wheel. Good condition, with light surface rust. Includes mounting bolt. The price is $20, plus the shipping.
-
Selling a NOS CR-3224JS Auto-Lite coil for use on most Chrysler, Plymouth, Dodge, DeSoto and Dodge trucks from 1935-42 cars and trucks up to 1947. This is the coil that gets its primary voltage via an armored cable from the key to the base of the coil. I bought it as a back up for my 1937 Dodge truck but never had to use it. Note this is a replacement that can be used on other makes so there is NO mounting ring attached to it. A separate mounting ring will have to be purchased if you do not have one. I checked the coil with an ohm meter and the resistance values for primary and secondary lo -
Front floor tool tray for a 1933 Chevrolet Standard. It may fit other models or years as well. The tool tray fits under the seat. This is an original steel panel and NOT a reproduction. A must have for anyone restoring a 1933 Chevrolet Standard or use it on your hot rod, rat rod, truck or custom project! $135.00 Pick up ONLY! Located near Detroit, MI 48088 MANY other 1933 Chevrolet Standard parts available. Please send a PM. -
These parts are from a 1914 Cadillac, The left part is the handbrake bottom and the center part is the shifter box and the right part is the shifter handle bottom. $150.buys all 3. Don in Ohio 740-816-4284
-
Set of two (2) splash aprons for a 1933 Chevrolet Standard. They may fit other models or years as well. These are original steel panels and NOT fiberglass reproductions. A must have for anyone restoring a 1933 Chevrolet Standard or use them on your hot rod, rat rod, truck or custom project! $175.00 for the set. Pick up ONLY! Located near Detroit, MI 48088 MANY other 1933 Chevrolet Standard parts available. Please send a PM.
-
Large box of Trim marked "1957 Desoto". Not sure of model or whether 4 door or 2 door. If anyone has interest we can get all the pieces out and see what we can figure out. All looks to be in good shape. Can deliver to Spring Carlisle. $250/all.
-
1939 BUICK, all series. Fits in the glovebox door opening. Used in a clock delete situation. Paint is spotty, but this plate is undented, and not rusty. The price is $15, INCLUDING shipping in the U.S.-48.
-
No need to have your 1939 BUICK temperature gauge repaired or cosmetically restored. Here is an NOS '39 BUICK temp gauge, still in the original packaging. Complete, as shown, with bulb and square nut. Fits all series. The price is $150, plus the shipping.
-
For 1939 BUICK, 40 and 60 series. This clamp affixes the trunk luggage board to the hole in the center of the spare tire wheel. Good condition, with light surface rust. Includes mounting bolt. The price is $20, plus the shipping.
-
This is the spoon-type clamp that holds the trunk-mounted spare tire in place. For all series 1938-1940 BUICK's, without sidemounts. Has surface rust, but otherwise in good condition. The price is $22, plus shipping.
-
I'm sure there's a better, more "proper" name for this item! This splitter takes the defroster blower air from the heater, and splits it into outputs to feed the defroster ducts under each front windshield section. Suitable for use in many later 1930's to early 1940's GM cars, including BUICK, CHEV, PONTIAC, OLDS, and CADDY. The price is $20, INCLUDING shipping in the U.S.-48. -
1939 BUICK, all series. Fits in the glovebox door opening. Used in a clock delete situation. Paint is spotty, but this plate is undented, and not rusty. The price is $15, INCLUDING shipping in the U.S.-48.
-
Set of two (2) Delco Lovejoy shocks for a 1930's Chevrolet. They may fit other makes as well. The shocks are not seized and appear to work. The shocks are marked as follows: Shock........R8/1060636 Arm/lever...1060633 Cap............1200C2E A must have for anyone restoring a 1930's Chevrolet or use them on your hot rod, rat rod, truck, trailer or custom project! $175.00 for the set. Pick up ONLY! Located near Detroit, MI 48088
-
Bringing these to Carlisle next Month. Good straight used 1965 Galaxie grille, Very nice 1967 Galaxie/LTD cast grille, Decent 1967 Buick Skylark grille with some weathering/pitting. $100 each.
-
Grilles I plan to take to Carlisle next month. Prefer not to ship these. '29 pontiac $174 obo '38 Dodge $200 obo '31 Dodge $250 obo '26 Hupmobile $175 obo
-
Nice 1932 Cadillac Wire Wheel with Trim. 17" diameter. Lugs holes good and rolls true. Free delivery to Carlisle. $300 obo
-
1941 Buick Dash for sale. Nice uncut sheet metal. Clean! Free delivery to Carlisle. $250
-
Left (driver’s) side running board for a 1933 Chevrolet Standard. It may fit other models or years as well. This is an original steel panel and NOT a reproduction. A must have for anyone restoring a 1933 Chevrolet Standard or use it on your hot rod, rat rod or custom project! $250.00 Pick up ONLY! Located near Detroit, MI 48088 MANY other 1933 Chevrolet Standard parts available. Please send a PM.
-
Set of two (2) side window regulators for a 1933 Chevrolet. They may fit other models or years as well. A must have for anyone restoring a 1933 Chevrolet or use them on your hot rod, rat rod, truck or custom project! $135.00 for the set! Pick up ONLY! Located near Detroit, MI 48088 Many other 1933 Chevrolet parts available. Please send a PM.
