sebastienbuick Posted June 25, 2020 Author Share Posted June 25, 2020 Then after having greased the strikes, application of a transparent varnish 1 Link to comment Share on other sites More sharing options...
sebastienbuick Posted June 25, 2020 Author Share Posted June 25, 2020 Then dismantling the window regulator motor from a door 2 Link to comment Share on other sites More sharing options...
sebastienbuick Posted June 25, 2020 Author Share Posted June 25, 2020 Then degreasing and cleaning, there was a great need The engine works very well, so I am not affected.Then lubricate the whole and apply a transparent varnish 2 Link to comment Share on other sites More sharing options...
zipdang Posted June 25, 2020 Share Posted June 25, 2020 More great progress! Glad to hear from you. 1 Link to comment Share on other sites More sharing options...
NC-car-guy Posted June 25, 2020 Share Posted June 25, 2020 Great to see you getting so close 1 Link to comment Share on other sites More sharing options...
EmTee Posted June 26, 2020 Share Posted June 26, 2020 Rochester is about a 2 hour drive West from here on the New York State Thruway (I-90). The Delco plant, however, has long been abandoned... https://rocwiki.org/Abandoned_Delco_Plant 1 Link to comment Share on other sites More sharing options...
lancemb Posted June 26, 2020 Share Posted June 26, 2020 4 hours ago, EmTee said: Rochester is about a 2 hour drive West from here on the New York State Thruway (I-90). The Delco plant, however, has long been abandoned... https://rocwiki.org/Abandoned_Delco_Plant "Sad" I could have used an emoji, but the police of language and expression have decided that only happy emojis are allowed. 1 1 2 Link to comment Share on other sites More sharing options...
sebastienbuick Posted June 28, 2020 Author Share Posted June 28, 2020 On 6/25/2020 at 10:51 PM, zipdang said: More great progress! Glad to hear from you. Thank you very much zipdang ! On 6/26/2020 at 12:18 AM, NC-car-guy said: Great to see you getting so close Thank you , I continued the work this weekend, I will put the photos soon On 6/26/2020 at 3:17 PM, EmTee said: Rochester is about a 2 hour drive West from here on the New York State Thruway (I-90). The Delco plant, however, has long been abandoned... https://rocwiki.org/Abandoned_Delco_Plant Thank you very much for this information, I did not know it . It's sad that the factory is closed Link to comment Share on other sites More sharing options...
Elpad Posted June 29, 2020 Share Posted June 29, 2020 On 4/19/2020 at 4:34 PM, sebastienbuick said: The wing when finished sanding Then sandblasting what is left on the wing Thad a big trunk, looks like an Rl Camino 1 Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 1, 2020 Author Share Posted July 1, 2020 ahah yes that's right it's a big trunk Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Good evening everyone, here is the continuation of the work of the previous weekends So I continue with the window regulator motor of the other door . It was so lacking in grease that even this rail started rusting 1 Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Degreasing, cleaning, greasing and application of a colorless varnish Then sand the rusty rail Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Then application of a colorless varnish on the rail Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 I don't have a photo but afterwards, lubricating the rail then reassembling the compass Then I took care of the bottom of the upright I report the shape of the angle with my shape protractor Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Then cut Then to have such a good opportunity, I apply hollow body wax to the inside of the upright 1 Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Then I go back to the piece to redo from the bottom of the amount Then solder the piece (not sand yet) Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 then cut the lower part The piece was pointed at two points, I had to cut the points at the dremmel where the two markings of small discsThe rust was just superficial, nothing bad Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Rust stripping Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Then formation of the new piece with the drilling of holes to point the piece as at the origin Then application of primer inside the piece Then after applying phosphate, application of white primer before putting in place the new piece Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Then presentation Then welding Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Then application of phosphating primer Then I took care of the top of the upright, it didn't show much damage but the outside part was still a little affected Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 CutoutWe can see that the original "glue / joint" had stopped the progression of rust Link to comment Share on other sites More sharing options...
Elpad Posted July 20, 2020 Share Posted July 20, 2020 Nice work! 1 Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Then stripping the rust on the top of the upright Then formation of the new piece, there was a fold given on the outside and make a curved hole so that the screw does not protrude Presentation Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Then after applying a phosphating primer, applying a white primer inside the room as well as on the upright.(I sanded it of course and removed this grain at the top right before having welded it) Then solder the new piece 1 Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Then application of phosphating primer Then as it is necessary to operate the doors at the same time, application of wax for hollow bodies inside the doors Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Then I took care of the hinge at the bottom of the front door, which had a small clearance like that on the driver's side.I didn't know it existed, and I ordered the ring kit for the hinge pins Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Disassembly Comparison of old and new rings.The old ones were made of plastic (it's normal that only the one broke it and was playing) reassembly Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Then I redid the body seals on the frame and on the doors Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Then application of white primer on the joints 1 Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 Then application of white primer on the parts that I redone 1 Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 20, 2020 Author Share Posted July 20, 2020 2 hours ago, Elpad said: Nice work! Thank you Elpad ! 1 Link to comment Share on other sites More sharing options...
GARY F Posted July 21, 2020 Share Posted July 21, 2020 Outstanding pictures as you work. 1 1 Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 21, 2020 Author Share Posted July 21, 2020 21 minutes ago, GARY F said: Outstanding pictures as you work. Thank you very much GARY F 1 Link to comment Share on other sites More sharing options...
sebastienbuick Posted July 26, 2020 Author Share Posted July 26, 2020 Good evening everyone, here is the rest of the work.So after finishing the small details and sanding everything, I painted the location of the hinges so that it was painted behind the hinges when reassembled Then the same for the back of the hinges 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now