pont35cpe

Another source, Lester J Harris, specializes in obsolete engine and chassis parts. Located in Minden, Nevada Ph# 775 267 2559

My first car, a `47 Chevy all stock, no options. It had 1 fuse, which was on the headlight switch.

Is that a remote headlight, or just no fender to mount it on?

If installing a `40-248 into a `37 you`ll need to use the original `37 intake/exhaust, along with the `37 bell housing.

And Christine?

1937 is the first year for the 248 cu in(small) engine, and has flat top pistons.

Is that split window coupe a `36 Buick?

I used 2 small flat blade screw drivers, inserting the blade between the glass and the frame(do this with vent window in the open position)work the blade up/down, which will spread the frame a little, as you work it, the glass will slide on out.

That car has a rumble seat, with a trunk lid below the rumble seat lid. `37 Cadillac shared this body. Too bad it is not closer to Texas.

https://www.ebay.com/itm/394578435332

Pictures?

Maybe you could make one of these work..https://www.ebay.com/itm/195697579263 https://www.ebay.com/itm/203686234599 https://www.ebay.com/itm/322134427315

Is the latch a plunger tongue type, or roller in a track? Is it possible to use a flat screwdriver or flat bar, working from inside into the latch area and maybe pop it open that way?

That looks like a 233 cu in for a 40series

`36 Dodge

Be careful..

1936 Plymouth..

Here are some, 3 different sizes. https://www.ebay.com/itm/200911214096 https://www.ebay.com/itm/194849997555 https://www.ebay.com/itm/191400050724

That`s actually for a `35 Oldsmobile.. that`s for the drivers side, passenger side would have the key lock. You have the inside handle 180deg off, need to flip it. `35 Chevy Master, Pontiac, and Oldsmobile used this type handles on the front suicide doors, difference being the detail of the exterior handle, interior handles are all the same.

`35 project

There is most likely at least 100,000mi on top of the 28,239. Interior looks moldy.

Skidplate, i bought a set of Chevy beauty trim rings for my `36 Buick 40series artillery wheels. The Chevy ones are not as deep as the Buick ones, they`ll fit, but there is a 1/4" gap at the back. Most people will not notice the difference.

Do you realize the assembly is laying upside down..Buick wheels were mounted with bolts back then.

Carnut, i don`t know if the brackets you`re looking for might be same/similar to a `37 Buick. Call Dave Tacheny 763 427 3460 4-7pm central M-F He parts out mid to late `30s Buicks..