peterjohn72 Posted September 4, 2022 Share Posted September 4, 2022 Hello, I was wondering if anyone new where to get a nos brake switch. Mine is working but the light stays on dim. Maybe a rebuild. Its only 82 years old😂 i put a carquest in for now Link to comment Share on other sites More sharing options...
Matt Harwood Posted September 4, 2022 Share Posted September 4, 2022 Replacements are readily available from the usual suppliers as well as on eBay. I've been using one designed for a Harley-Davidson motorcycle, which has much lighter pedal pressure--it turns on earlier. They cost about $40. Just disconnect the terminals, unscrew the switch, screw in the new one and reconnect the wires. Problem solved! 4 Link to comment Share on other sites More sharing options...
Pfeil Posted September 4, 2022 Share Posted September 4, 2022 I think I would consider a wiring harness replacement from the look of your picture and the age of the car. 4 Link to comment Share on other sites More sharing options...
Larry Schramm Posted September 4, 2022 Share Posted September 4, 2022 3 minutes ago, Pfeil said: I think I would consider a wiring harness replacement from the look of your picture and the age of the car. Agree. Fix the obvious first which is the wiring. You might be surprised on the results of good wiring. 1 Link to comment Share on other sites More sharing options...
wayne sheldon Posted September 4, 2022 Share Posted September 4, 2022 With only three or four strands unbroken? That alone could be making the lamp dim. Replacing the switch might not help at all if the real problem is the wire! Link to comment Share on other sites More sharing options...
peterjohn72 Posted September 4, 2022 Author Share Posted September 4, 2022 The brake lights worked fine. But stayed on dim when the car was off. I installed new connectors and a carquest brake switch. All is well in the world again..150 miles later👍 Link to comment Share on other sites More sharing options...
Rusty_OToole Posted September 4, 2022 Share Posted September 4, 2022 Those pressure switches were used on a lot of cars. And, they break down. Last one I bought came off the shelf at the local auto parts store, I asked for one for a 1979 VW beetle. I forget what car I was working on but it was American from the fifties. The switch fit and worked perfect. Link to comment Share on other sites More sharing options...
peterjohn72 Posted September 4, 2022 Author Share Posted September 4, 2022 Thank you im trying to use nos parts if I can, just a personal prefrence Link to comment Share on other sites More sharing options...
Terry Bond Posted September 4, 2022 Share Posted September 4, 2022 Just out of curiosity, a "1941 Super" what??? 1 Link to comment Share on other sites More sharing options...
Bloo Posted September 4, 2022 Share Posted September 4, 2022 (edited) As already mentioned, these are extremely unreliable. Yes, you can get ones that turn on at a lower pedal pressure now. I trust these switches about as far as I can throw them. I have had them fail on a lot of cars, sometimes repeatedly. On the day I tried to bring the 36 Pontiac home, I took a friend along who was going to drive my car back to Seattle where I could retrieve it later. He was helping me bulb check the Pontiac before I drove it over Stevens Pass, When he stepped on the brakes and let up something started smoking. Fortunately one of us, I don't remember who, had the presence of mind to reach down and pull a cable off of the battery. Thank god the battery wasn't bolted in solid under the floorboards like it is supposed to be. A little further testing revealed that the switch had shorted to ground and was trying to catch the power feed for the brake lights on fire. The brake lights had been working fine when I was test driving the car before buying it a couple of days earlier. That scuttled the trip over Stevens Pass with my new old car. I went back a few days later by myself with a new switch. Yes, it looks different. I also wanted an original type. Watch ebay. The original type shows up quite a bit (for my car, not yours, but one for yours probably does too. I wasn't looking for one like yours They are close but not exact.) I bought one like my original, but never put it on as the modern one is working, and what that original switch did spooked me. I have seen a bunch of failures, but I have never seen one short to ground before. You really should clean-spread-resolder that connector. It looks like it will probably break just from vibration. Good luck on your search for an original switch. Edited September 4, 2022 by Bloo (see edit history) Link to comment Share on other sites More sharing options...
peterjohn72 Posted September 4, 2022 Author Share Posted September 4, 2022 Thanks for the replys. I replaced the switch its working fine for how long? Got two. Fixed the wires and new connectors. Everything thing is fine. I will drive this car anywhere. Its all original mostly and well taken care of. Again I can drive this car anywhere with no to minimal issues. Super 50 model 56 business coupe. 3 Link to comment Share on other sites More sharing options...
peterjohn72 Posted September 4, 2022 Author Share Posted September 4, 2022 (edited) 95% original paint touched up here or there 75mph purrs right along straight one finger Edited September 4, 2022 by peterjohn72 (see edit history) Link to comment Share on other sites More sharing options...
mrspeedyt Posted September 5, 2022 Share Posted September 5, 2022 When I bought my 41 Cadillac back in 1985 the stock brake light switch looked old then. and it still works fine. (knock on wood…) I would like to have faster reacting brake lights… i’m thinking what it would take to use a lever type switch or a button type switch that would immediately activate upon the slightest bit of movement of the brake pedal… I gotta crawl under there and try and figure out a very easy mounting without messing things up. Link to comment Share on other sites More sharing options...
kingrudy Posted September 5, 2022 Share Posted September 5, 2022 Nice looking car, but I agree that replacing that wiring would be a good idea. I replaced all of my wiring on my '40 Super five years ago after I noticed the cloth insulation would fall off if I touched any of the wiring. I had visions of the car going up in flames. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now