TerryB Posted June 19, 2019 Share Posted June 19, 2019 Honda is using a restored Chevy pickup to celebrate its US motorcycle anniversary. https://www.autoblog.com/2019/06/18/honda-chevy-pickup-restoration/ 4 Link to comment Share on other sites More sharing options...
joe_padavano Posted June 19, 2019 Share Posted June 19, 2019 What's the deal with the original screw-top master cylinder AND a modern power disc brake conversion? or are they using the original master for a hydraulic clutch? Link to comment Share on other sites More sharing options...
John348 Posted June 19, 2019 Share Posted June 19, 2019 Hey Joe, The Chevy pick-up's had a factory hydraulic clutch. The original cylinder shared the same casting body as the master cylinder but had two separate chambers, one side for the brakes and the other for the clutch. The cylinder that they are using on this truck is not the same coveted screw top. 1 Link to comment Share on other sites More sharing options...
J3Studio Posted June 20, 2019 Share Posted June 20, 2019 Lots of good PR for them: https://www.roadandtrack.com/car-culture/classic-cars/a28087548/honda-restores-chevrolet-pickup/ Link to comment Share on other sites More sharing options...
mike6024 Posted June 20, 2019 Share Posted June 20, 2019 (edited) Is this original "coveted screw top" ? 1961 Chevrolet Apache 10 Short Bed Stepside Pick-up Truck Edited June 20, 2019 by mike6024 (see edit history) 1 Link to comment Share on other sites More sharing options...
John348 Posted June 20, 2019 Share Posted June 20, 2019 (edited) 1 minute ago, mike6024 said: Is this original? 1961 Chevrolet Apache 10 Short Bed Stepside Pick-up Truck The master/clutch cylinder is. I guess when Honda added the power brake set-up to the Chevy they had to find something that would work the clutch Edited June 20, 2019 by John348 (see edit history) Link to comment Share on other sites More sharing options...
WQ59B Posted June 20, 2019 Share Posted June 20, 2019 This is by FAR the most interesting & appealing vehicle ever to wear a Honda (painted) nameplate on it. 2 1 Link to comment Share on other sites More sharing options...
John348 Posted June 20, 2019 Share Posted June 20, 2019 11 minutes ago, mike6024 said: 1964 Dodge D100 clutch master cylinder. The brake Master cylinder looks the same. What is in the "Honda Apache" looks something like this. That Dodge one has a center bolt, the one they are using looks like the lid screws on and off the body casting Link to comment Share on other sites More sharing options...
TerryB Posted June 20, 2019 Author Share Posted June 20, 2019 (edited) My first motorcycle was a Honda. 1972 XL250 Enduro. Made me the world renown motorcycle competition rider I am today 😊, or at least in my own mind I am! Edited June 20, 2019 by TerryB (see edit history) 2 Link to comment Share on other sites More sharing options...
Doug Novak Posted June 20, 2019 Share Posted June 20, 2019 I think this is a great story. In fact I use to carried my '72 Honda CB450 in my '69 Chevy C10 often. Once when the C10 had an engine swap done by a Motor Builder, Shore Line Motors in Easton, I had given a 327 v8 to rebuild and replaced the original six that was in the C10. The 327 through a rod 10 miles from the shop. I made it home on the Honda 450 while the shop came and took the C10 back to their shop. They told me to come back in two weeks and the truck would be back in service. I road the CB450 (THIS WAS IN THE WINTER) the 70 miles back from home to the Shop to get the Truck back. The best thing was that when I got there and looked at the Truck they had replaced the 327 with a rebuilt solid lifter highly modified 350 V8 that is still in my C10 truck going on 20+ years now running perfectly. The shop did not charge me for the 350V8. So.......Chevy Trucks and Honda Bikes are born to be together. I still have the '69 C10 but sold the Bike years ago. 2 Link to comment Share on other sites More sharing options...
mike6024 Posted June 20, 2019 Share Posted June 20, 2019 We had a lot of fun in those days. Rode on the fire roads, in lake county northern California, around the north side of Clearlake and Lake Pillsbury. Our leader had a Honda XL 175, that had a 250cc top end fitted to it. I had a Honda trail 90, then a '74 Kawasaki KS-125. My cousin Joe had a Honda 70, and a Honda XL-100, even a Honda 50 minibike. The 70 was a minibike too. He liked riding those small thing even though he was was too big for them. 1 Link to comment Share on other sites More sharing options...
TerryB Posted June 20, 2019 Author Share Posted June 20, 2019 Funny my Hondahauler was a Chevy too, a 1967 C10 in bright red. Used it to take the XL250 to enduros in eastern PA. After crashing more times than I could count with a heavy bike and street legal tires, the Honda went back to street duty and the off road stuff was handled by a Husqvarna CR250. Still have fond memories of the truck and bike. It was nearly impossible to kill those old Hondas, they were overbuilt and many are still around today. 2 Link to comment Share on other sites More sharing options...
mike6024 Posted June 20, 2019 Share Posted June 20, 2019 Great video IMO. This is exactly as I remember it way back when. This is what riding the fire roads and trails is like in Lake County, Northern California. Out of Upper Lake, which means the north end of Clearlake, and around Lake Pillsbury. 1 Link to comment Share on other sites More sharing options...
John348 Posted June 20, 2019 Share Posted June 20, 2019 Great stories guys! Link to comment Share on other sites More sharing options...
Ronnie Posted June 20, 2019 Share Posted June 20, 2019 3 hours ago, TerryB said: My first motorcycle was a Honda. 1972 XL250 Enduro. Made me the world renown motorcycle competition rider I am today 😊, or at least in my own mind I am! I had one of those with a stroker crank and a big bore kit that made it 305cc. Best hill climbing bike I ever had. My friends called me the Wheelie King... right up to the point when I flipped it over backwards on the pavement. Then they called me the Road Rash King. 😁 2 1 Link to comment Share on other sites More sharing options...
john2dameron Posted June 21, 2019 Share Posted June 21, 2019 The first pickup I bought was a 1960 Chevy C-10, manual transmission and without power brakes or power steering. I bought it so I could leave my new Ford convertible home and not let fallout at the job site destroy the paint on it. A few nights after I bought the pickup I drove it to work on the night shift. Came out the next morning and started it but could not get the transmission in gear. No clutch. Shut the engine off, put the truck in reverse, and started it in reverse. When It got far enough back for me to go forward, I cut the engine off again, put it first gear and started it back up; then shifted it in to second without the clutch and drove off the parking lot. I made it through the first traffic light but the second one caught me. I hit the brake pedal and had no brakes. I eased into a service station and discovered the truck was out of brake fluid. I put brake fluid into the truck and lo and behold the clutch worked. I only kept the truck about 3 or 4 months and had to put brake fluid in it periodically. I never wanted another hydraulic clutch. Link to comment Share on other sites More sharing options...
Doug Novak Posted June 21, 2019 Share Posted June 21, 2019 I actually had (2) 1972 Honda 450CBs up until about 6 years ago. I paid 0ne hundred bucks each, for these back in the early 90's which was what they went for. I sold the pair together for $ 2K. One was in great shape and the other was a parts Bike. I carried in my 69 C10 SWB Chevy . Link to comment Share on other sites More sharing options...
TerryB Posted June 21, 2019 Author Share Posted June 21, 2019 The CB350s and CB450s were excellent cycles. The little 4 stroke singles were the kind most all of us early riders enjoyed first. Link to comment Share on other sites More sharing options...
Ronnie Posted June 21, 2019 Share Posted June 21, 2019 18 minutes ago, TerryB said: The little 4 stroke singles were the kind most all of us early riders enjoyed first. That was true for me too. My first bike was a '68 model CL90 scrambler (below). Followed by a CL305 scrambler, a CB400T, and my last Honda was the XL250 dirt bike. Link to comment Share on other sites More sharing options...
padgett Posted June 21, 2019 Share Posted June 21, 2019 I commuted to work on a CB160 for years until a Monte Carlo driven by an illegal alien rearended me at a stoplight. Worst pain of my life and most welcome pain was when they straightened me out on the X-ray table. Just had to sleep on the floor for a few months. Link to comment Share on other sites More sharing options...
Doug Novak Posted June 21, 2019 Share Posted June 21, 2019 (edited) 3 hours ago, Ronnie said: That was true for me too. My first bike was a '68 model CL90 scrambler (below). Followed by a CL305 scrambler, a CB400T, and my last Honda was the XL250 dirt bike. Ah yes, my first Bike was a 1965 Bridge Stone 90 2 stroke rotary valve. Then in 1969 I bought a Bridge Stone 175. These were excellent Bikes and very fast. Production was forced to stop soon after because Bridge Stone was selling Bridge Stone Tires to Honda and the other Japanese Motor Cycle manufacturers, their biggest customers, who complained about their competition and threatened to cancel their orders. I then switched to Hondas 350's and 450's. Edited June 21, 2019 by Doug Novak Clearfication (see edit history) Link to comment Share on other sites More sharing options...
joe_padavano Posted June 21, 2019 Share Posted June 21, 2019 On 6/19/2019 at 7:53 PM, John348 said: Hey Joe, The Chevy pick-up's had a factory hydraulic clutch. The original cylinder shared the same casting body as the master cylinder but had two separate chambers, one side for the brakes and the other for the clutch. The cylinder that they are using on this truck is not the same coveted screw top. Got it, thanks. Link to comment Share on other sites More sharing options...
Ronnie Posted June 21, 2019 Share Posted June 21, 2019 5 hours ago, padgett said: I commuted to work on a CB160 for years until a Monte Carlo driven by an illegal alien rearended me at a stoplight. That looks like a CB160 in the back of the truck. Hard to say for sure. Link to comment Share on other sites More sharing options...
TerryB Posted June 21, 2019 Author Share Posted June 21, 2019 1965 CB160. Link to comment Share on other sites More sharing options...
zepher Posted June 22, 2019 Share Posted June 22, 2019 About 30 years ago I worked with a guy that worked for Honda back in the early 60's when Honda was trying to break into the larger displacement US motorcycle market. He said a friend of his was a Dept supervisor and got him a job testing motorcycles on a track they had out behind the corporate offices in Gardena. One day he was given the task of test riding a prototype bike on the test track. Said he was busy beating the snot out of it when he saw his friend furiously waving at him to stop. His friend was with a few Japanese men. One of those men was Mr.Honda and the friend was sure they would both be fired because he had hired the guy that was beating the snot out of a valuable prototype. When he finally rolled up to where the group was standing and saw that Mr. Honda was there he was also quite sure they would be fired. He started to apologize profusely for being so rough on the one and only prototype and Mr. Honda wouldn't hear of it. He said if that is the way Americans ride motorcycles then Honda must make a motorcycle that would stand up to how they are ridden in America. 1 Link to comment Share on other sites More sharing options...
J3Studio Posted June 22, 2019 Share Posted June 22, 2019 17 hours ago, zepher said: About 30 years ago I worked with a guy that worked for Honda back in the early 60's when Honda was trying to break into the larger displacement US motorcycle market. He said a friend of his was a Dept supervisor and got him a job testing motorcycles on a track they had out behind the corporate offices in Gardena. One day he was given the task of test riding a prototype bike on the test track. Said he was busy beating the snot out of it when he saw his friend furiously waving at him to stop. His friend was with a few Japanese men. One of those men was Mr.Honda and the friend was sure they would both be fired because he had hired the guy that was beating the snot out of a valuable prototype. When he finally rolled up to where the group was standing and saw that Mr. Honda was there he was also quite sure they would be fired. He started to apologize profusely for being so rough on the one and only prototype and Mr. Honda wouldn't hear of it. He said if that is the way Americans ride motorcycles then Honda must make a motorcycle that would stand up to how they are ridden in America. That's a great story—it explains some of Honda's success in the US. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now