Kosage Chavis Posted December 7, 2023 Author Share Posted December 7, 2023 Close to the finish line. All drywall is up and it took longer than I wanted. I am just glad it is done. I also just got the lights installed. Now, just need to make a couple of shelves and clean up a little. 6 Link to comment Share on other sites More sharing options...
EmTee Posted December 7, 2023 Share Posted December 7, 2023 Looks great! The finished walls really brighten the space. Are you planning to tape the joints and fill the screwheads? 1 1 Link to comment Share on other sites More sharing options...
NC-car-guy Posted December 7, 2023 Share Posted December 7, 2023 Great work! 2 Link to comment Share on other sites More sharing options...
JohnD1956 Posted December 7, 2023 Share Posted December 7, 2023 Looks like a happy place to work on the 55. Congratulations on a wonderful build! 1 1 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted December 8, 2023 Author Share Posted December 8, 2023 14 hours ago, EmTee said: Looks great! The finished walls really brighten the space. Are you planning to tape the joints and fill the screwheads? 11 hours ago, NC-car-guy said: Great work! 7 hours ago, JohnD1956 said: Looks like a happy place to work on the 55. Congratulations on a wonderful build! Thank you Guys! I do plan on taping and mudding the joints, but not anytime soon. I need a break. Plus, I already committed to my Wife to do a "refresh" for the kitchen. I do plan on getting back to working on the Buick now that the garage is more of where it needs to be. 2 Link to comment Share on other sites More sharing options...
EmTee Posted December 8, 2023 Share Posted December 8, 2023 10 hours ago, Kosage Chavis said: I do plan on getting back to working on the Buick now that the garage is more of where it needs to be. Sounds like there's epoxy floor coating in your future! 2 Link to comment Share on other sites More sharing options...
Bloo Posted December 8, 2023 Share Posted December 8, 2023 I have no personal experience with the exact product @EmTee linked, but I have worked in several shops with professionally done epoxy floors. Highly recommended. Also, do it before the floor gets dirty. This type of floor is bulletproof if done as part of new construction. In shops where it was done later, they wash the concrete with acid or something, and the coating is better than bare concrete in any event, but adhesion was never perfect on used floors that had once been oily. Light gray color (reflects light under the car) and a traction additive (sand?) is the best kind of shop floor. Link to comment Share on other sites More sharing options...
EmTee Posted December 8, 2023 Share Posted December 8, 2023 A friend of mine used the Rustoleum product on the concrete floor of the pole barn he built this year. The barn is something like 30' x 50', so bigger than a typical garage. He applied it after the concrete cured and had been cut for control joints. That allowed him to apply the epoxy one section at a time to ensure it could be spread and 'flocked' before the epoxy set up. It looks good and should be very easy to clean. I wish I had done my floor, but at this point I'd have nowhere to put my stuff while coating the floor. 1 Link to comment Share on other sites More sharing options...
NC-car-guy Posted December 11, 2023 Share Posted December 11, 2023 On 12/8/2023 at 7:32 AM, EmTee said: Sounds like there's epoxy floor coating in your future! I used this exact product, worked well for me. One note, all it takes is a little bit of oil and it's slicker than ice! 2 1 Link to comment Share on other sites More sharing options...
Bloo Posted December 11, 2023 Share Posted December 11, 2023 There should be sand, or something similar added to help with traction. I don't know what they recommend. Link to comment Share on other sites More sharing options...
EmTee Posted December 11, 2023 Share Posted December 11, 2023 They show this anti-skid on their website. I'm thinking about using the epoxy coating with this on the floor of my enclosed car hauler. 4 Link to comment Share on other sites More sharing options...
MrEarl Posted December 11, 2023 Share Posted December 11, 2023 I think I covered it in my thread that I used an antiskid additive full strength in the shop, less in the office. 3 Link to comment Share on other sites More sharing options...
Kosage Chavis Posted December 23, 2023 Author Share Posted December 23, 2023 I AM DONE! At least for this phase. I hid the elevator (to an extent) and put some feet on it.I framed out the attic ceiling doors and closed them off.And I added a couple of shallow shelves to get some use of the "dead" space over my work bench areas.A few shots of the finished garage.I appreciate all of the suggestions, advice and encouragement from you all. I am very happy with how everything turned out. I am going to take a small break and then it's back to the Buick...finally! 4 1 Link to comment Share on other sites More sharing options...
EmTee Posted December 23, 2023 Share Posted December 23, 2023 Nice job - you're gonna love working out there! 2 1 Link to comment Share on other sites More sharing options...
MrEarl Posted December 24, 2023 Share Posted December 24, 2023 Nice neat work, looks great. 1 Link to comment Share on other sites More sharing options...
Century Eight Posted December 24, 2023 Share Posted December 24, 2023 On 12/8/2023 at 7:55 AM, Bloo said: I have no personal experience with the exact product @EmTee linked, but I have worked in several shops with professionally done epoxy floors. Highly recommended. Also, do it before the floor gets dirty. This type of floor is bulletproof if done as part of new construction. In shops where it was done later, they wash the concrete with acid or something, and the coating is better than bare concrete in any event, but adhesion was never perfect on used floors that had once been oily. Light gray color (reflects light under the car) and a traction additive (sand?) is the best kind of shop floor. Even on a new floor and more so if dirty, see if you can get a diamond grinder and rough it up. That will promote adhesion, especially on a floor that has had dirt or oil. I’m very happy with mine. All will get some degree of tire pickup especially on an unclean floor. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now