Jump to content

Recommended Posts

Not much has happened over the last week and a half.  Final trimout of the electrical work was completed.  Still waiting on the power company to run their line to the meter.20200916_150134.thumb.jpg.f08f28144512b037aab67c796e0aff4d.jpg20200916_150235.thumb.jpg.3c11e7c0269481160e989ac1b93e3cbf.jpg20200916_150251.thumb.jpg.9cc7d253aba9a653df90ffb00ac065c8.jpgAlso, started moving things into the new garage...which means finally saying goodbye to the good old carport.  20200919_145142.thumb.jpg.2449ae805990b77ae519f9f77607ff69.jpg20200919_164100.thumb.jpg.7525bc53a938cdac3a578a682f6fa6e0.jpgIt served it's purpose and I am glad that I had it, but I am not sad to see it go.  

  • Like 8
  • Thanks 1
Link to post
Share on other sites
  • 2 weeks later...

Lookin' good Kosage!  So, did the utility company or city make you run a dedicated service to the garage as opposed to adding a sub-panel from the house, or was the house service maxed-out?

  • Thanks 1
Link to post
Share on other sites
13 hours ago, EmTee said:

So, did the utility company or city make you run a dedicated service to the garage as opposed to adding a sub-panel from the house, or was the house service maxed-out?

Our house service is maxed out.  Either way, I think we would have went with the option of the garage having it's own service anyway.  

  • Like 6
  • Thanks 1
Link to post
Share on other sites
  • 2 weeks later...

Over the weekend, I cleaned and organized the new garage as best I could.  I can't really work in here like I want to until I have a work bench.  So, that's what I started to work on.  Removed the old work bench from the other garage.20201003_135900.thumb.jpg.a3179236cf3261f0e9284ae35e86c70a.jpgThen, started putting together the structural part of the new work bench.  20201012_162822.thumb.jpg.85a088ca884cfa601f4a74816383d5fe.jpgI don't have a table saw and I really don't want to spend hundreds of dollars to buy one.  So, I made one with a regular circular saw and scrap wood!20201012_162830.thumb.jpg.9a6d4b813f9b31be524900b536375f52.jpg20201012_183948.thumb.jpg.8996b2c58008443f297498acfd9d5bbb.jpg20201012_183958.thumb.jpg.e12455785fc4c1a0b7e1b2131cceb27f.jpgAll I need to do now is make a decent fence for it and I can finish one of my work benches.

  • Like 5
Link to post
Share on other sites

Build the fence for the table saw today.20201014_173638.thumb.jpg.43903fd114f907ece8902b25e10d4820.jpg  @JFranklin, also made a pair of these to keep my fingers away from the blade.20201014_174656.thumb.jpg.c20fe77c38475ec936638623e17859b5.jpgOut of all of the tools I have ever operated, the table saw is what I fear most.  Got to respect it.  I cut my first piece with no issue.  20201014_173627.thumb.jpg.43305ae3a33fedfb5def344605927daa.jpgWent ahead and cut a few more pieces for the bottom portion of my work bench.  The cuts look good.  Now, to finish this work bench this weekend!

  • Like 4
Link to post
Share on other sites

Phase 1 of the work bench is done.  This is my stationary work bench.  I still need to put my vice onto it.20201018_171223.thumb.jpg.455c672eaa6a2fb88020de4216d7379b.jpgI will also add a fold-down portion on the end to extend my work space if needed.  It will also allow for more floor space when I need that more.  On the other side of the garage, I will build another work bench with a fold-up portion.  I want this work bench to be multifaceted.  The idea is when needed and both folding portions are in place on both work benches, I will have work bench space along the entire length of the backside of the garage.  The other work bench will be a roller that can also fold down entirely on the wall.  

 

In the meantime, I need to build a set of small shelves to hold both bumpers from my Buick.  That way, I can finally move both Buicks in the shop.

  • Like 4
Link to post
Share on other sites
On 10/19/2020 at 6:03 PM, Kosage Chavis said:

set of small shelves to hold both bumpers from my Buick

 

an oxymoron of sorts

 

and don't forget, with help, you can hang stuff from the ceiling joists too, tha's what kids are for....,

  • Haha 2
Link to post
Share on other sites

20201018_171223.thumb.jpg.455c672eaa6a2f

 

I see you have multiple outlets at the bench - that's a good thing!  I'd also suggest that you consider anchoring the bench top with a couple of lag bolts into the studs.  You 'll be glad when hack-sawing or leaning hard on that stuck bumper bracket bolt (or whatever) clamped in the vise.  ;)

Edited by EmTee (see edit history)
  • Like 1
Link to post
Share on other sites
3 hours ago, EmTee said:

I'd also suggest that you consider anchoring the bench top with a couple of lag bolts into the studs.  You 'll be glad when hack-sawing or leaning hard on that stuck bumper bracket bolt (or whatever) clamped in the vise.  ;)

Good to hear from you @EmTee.  I already took care of this.  3 at the top and 3 at the bottom.

  • Like 2
Link to post
Share on other sites
  • 1 month later...
  • 2 months later...

We now have clearance to the new garage.  Here's a before picture showing the tree next to the car.20201108_155600.thumb.jpg.ca9b35a3edc5e469b94321a3251560c2.jpgHere's an after picture with the tree removed.20210217_163256.thumb.jpg.2cc90d54239935097fc774f2ba4fcf36.jpgThe 3 wooden panels were laid against the garage door to protect it from the stomp grinding.

  • Like 6
Link to post
Share on other sites
54 minutes ago, MrEarl said:

What kind of tree was it? Did you get a piece of it for say possibly an anvil stand? 

It was a green oak.  I didn't keep anything.  The tree was rotting out from the middle really badly.  

  • Like 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...