Guest Posted July 16, 2015 Share Posted July 16, 2015 Hi Guys, I want to update the old 6.00 16's on my '38 Plymouth to a newer/safer radial. I'm curious what you're using.Greg Link to comment Share on other sites More sharing options...
Restorer32 Posted July 16, 2015 Share Posted July 16, 2015 Radials are safer? Link to comment Share on other sites More sharing options...
Guest bkazmer Posted July 16, 2015 Share Posted July 16, 2015 For the way the average 38 Plymouth is driven maybe not. In general as a car tire, yes - contact patch size under lateral loads Link to comment Share on other sites More sharing options...
Guest Posted July 16, 2015 Share Posted July 16, 2015 Gee, thanks for that valuable input. But can either of you answer my original question? Link to comment Share on other sites More sharing options...
West Peterson Posted July 16, 2015 Share Posted July 16, 2015 For the answer, I'd call Coker Tire, or one of the other suppliers.I really don't think you need to put radial tires on your car, tho. Link to comment Share on other sites More sharing options...
Restorer32 Posted July 16, 2015 Share Posted July 16, 2015 In my opinion nothing ruins the look of an antique more than radial tires unless it's a rod but then you didn't ask for my opinion. Call Coker. Link to comment Share on other sites More sharing options...
Guest bkazmer Posted July 16, 2015 Share Posted July 16, 2015 Gee, I'll help with the math then. 6 inches =152.4 mm Difficult to find something like a PR155, so as narrow as you can find (185?) with a 75-80% aspect ratio. Your fender clearances are pretty big compared to other cars so you can get away with some extra width Link to comment Share on other sites More sharing options...
Guest Posted July 16, 2015 Share Posted July 16, 2015 In my opinion nothing ruins the look of an antique more than radial tires unless it's a rod but then you didn't ask for my opinion. Call Coker.You're right. I didn't. Link to comment Share on other sites More sharing options...
C Carl Posted July 16, 2015 Share Posted July 16, 2015 Radials are safer?Unequivocally, unambiguously, yes. I have been driving aggressively and otherwise on radials for over 1/2 century. On many types of old cars. Greg , and bkazmer are quite correct. Average "anycars" driven under average conditions can suddenly find themselves in other than average situations. The lower slip angle of radial tires contributes to the improved handling which may help to avoid an accident. Perhaps there may be some exception to this , but that will depend on some authorative expert to chime in here. Greg , in years past I have used high pressure radial truck tires to greatly improve handling on some of my old cars. Also , I had 16" Michelin radials on my race modified XK120 MC. One day I suddenly found myself in the middle of a high speed multi-car pileup on the freeway. The Jag' threaded through it as cars bounced off one another and self destructed. No time for sweat or fear , the radials helped me to put the car where I wanted it to be , when it had to be there. Hey , I gotta get down the line to try to get my 1927 Cadillac to CCCA Grand Classic this weekend. No time right now, but I can flesh out some of this later. You might see if there is some truck tire that will make your '38 Ply' a safer cruiser. Subjective , but IMHO radial truck tires on an old cruiser look very "cool" , and right down to practical business. Again , old Carl's humble opinion , but we are all entitled to 'em. - Old , Carl Link to comment Share on other sites More sharing options...
padgett Posted July 16, 2015 Share Posted July 16, 2015 Back in the day I used Dunlop RS5s in 6.00x16 for the XK-150S. Today my cars use 225x60x16s but that wants a 7" rim. Why don't we start with what does your car weigh ? There are small 16" radials but I'd hate to see you undertired. Link to comment Share on other sites More sharing options...
Guest Posted July 17, 2015 Share Posted July 17, 2015 Thanks "Old Carl".I'll wait for your further input. Link to comment Share on other sites More sharing options...
trickydicky43richard Posted July 17, 2015 Share Posted July 17, 2015 Gidday Greg.I have researched this subject to replace the cracked sidewall 600-16's on my 39 Chrysler and in my opinion came up with a good radial tyre compromise.I found that Yokohama (an others) have a Light Truck Tyre in 185 85 16, the Yokohama's in particular have straight side walls and look the part with a plain narrow tread design. Cost Au $145 ea ( Approx $108 Usd)When inflated they are about a 1/2" overall smaller dia than the 600 16's and no more an inch wider at the sidewalls.I also found when inspecting various different brands in the same size that they do differ in physical dimensions,(and price) and just because they are marked as 185 85 16's does not mean they are made to the same overall size tolerances.To fit these (or similar quality brands) you will need to use inner tubes and I used a 5.50-600 16 tubes suitable for Radial Tyres (radial tubes). (Cost $AU 5-50 Ea)I dont know where you are located so you will need to source a suitable locally available brand, but do inspect them physically for size, tread design, sidewalls and ply ratings before you buy. I topped mine off with some Atlas thin white strip flappers ( Porta Walls??). The thin white walls hug the tyre beautifully and are not as 'cumbersome" as the bulky wide white wall type.I hope I have been of some help and I know I will get criticized by the Tyre techo's and Purists for some of my recommended content, then again that is what a forum is for.Good luck in your search,RP.S Be wary of all the cheap Chinese brands, you won't believe how many obscure brands there are!! Link to comment Share on other sites More sharing options...
Paul Dobbin Posted July 17, 2015 Share Posted July 17, 2015 (edited) Coker tire calls then 600 R 16. My opinion only matters to me. Enjoy your car, driving it is the best medicine for you and your car. Edited July 17, 2015 by Paul Dobbin (see edit history) Link to comment Share on other sites More sharing options...
wilmacmike Posted July 17, 2015 Share Posted July 17, 2015 Hello Greg, Check out Diamond Back tires. There is a lot of good info on their web-site. If you want to keep the look to the era of your car, look at their new Auburn Radial. It looks like an old piecrust side wall bias ply tire. Not sure when it will be availible. I know it will be expensive. Mike Link to comment Share on other sites More sharing options...
Gary_Ash Posted July 17, 2015 Share Posted July 17, 2015 One option is LT215-85/R16 tires for light trucks and SUVs. These will fit on 4.5" wide rims, though tubes might be suggested on older wheels. They will be close to the same diameter as 6.00-16 or 6.50-16 bias tires. Try Googling for tires from your local discount store. These are probably the skinniest, tallest 16" radials that you will find. I don't think that LT205-85/R16 tires are available, but I would love to be wrong. Link to comment Share on other sites More sharing options...
trickydicky43richard Posted July 17, 2015 Share Posted July 17, 2015 185 85 16 Lt are available and closer match Link to comment Share on other sites More sharing options...
Jon37 Posted July 17, 2015 Share Posted July 17, 2015 Coker has the only radial (black or whitewall) at present, that is an exact replacement for the 600 x 16 and will fit a 4" wide wheel. (What is your wheel width, by the way?) Diamondback says they will be offering a 600 x 16 radial equivalent this fall, or later. I would check with both companies if I were you. Here's a long shot: I'm in touch with a fellow '37 Terraplane owner in New Zealand who is successfully using Bridgestone "Dueller" radials, 205R16c on his original rims (4" I assume). They are way cheaper than the Cokers, and he does a lot of back road driving so they hold up. These tires were not (so far as I know) imported to the US but you could take a look. Maybe some found their way to the U.S. They are blackwalls, however, and probably do not have the skinny 1930's "look" you might be seeking. Link to comment Share on other sites More sharing options...
Gary_Ash Posted July 17, 2015 Share Posted July 17, 2015 trickydicky43richardPosted Yesterday, 10:18 PM"185 85 16 Lt are available and closer match" Yes, both 185/85R16 and 205/85R16 would be a closer match and look more authentic, but they don't seem to be available in the U.S., unfortunately. We can buy LT215/85R16 tires here, and they seem to be the narrowest 85-section tires available. A pity! It may be possible to special order the narrower ones, but they don't show up in any Googling of U.S. tire dealers or distributors as stocked items. Maybe you can send us some skinny ones from Australia. Link to comment Share on other sites More sharing options...
Guest Posted July 17, 2015 Share Posted July 17, 2015 Thanks Guys.Richard, I will check the 185/85/16. Do you have to run tubes in them? I'm not a big fan of tubes if they can be avoided.Gary, I agree some of those closer match sizes would be great but I've had no luck locating them here in the U.S.Greg Link to comment Share on other sites More sharing options...
trickydicky43richard Posted July 17, 2015 Share Posted July 17, 2015 Hi Greg and Gary, Gee I would have thought you could source 185 85 16 in the States,did you try E bay?As the early Mopar rims have the wheel centres rivited to the rims they are probably not air tight, so tubes are the go.rich Link to comment Share on other sites More sharing options...
Guest Posted July 17, 2015 Share Posted July 17, 2015 Gotcha.I'm searching for the 185/85/16's now.Thanks again, Greg Link to comment Share on other sites More sharing options...
Chris Bamford Posted July 17, 2015 Share Posted July 17, 2015 Regarding tubes or not on early Mopar rims, I run bias ply tires without tubes on my '47 D25 (Canadian Dodge, basically same as '47US Plymouth). I got all-too-frequent flats when using tubes, none since going without. Link to comment Share on other sites More sharing options...
Guest Posted July 17, 2015 Share Posted July 17, 2015 I'm coming up empty on the 185/85/16 over here, Rich.My local tire shop came up with a 225/70/16 as an equivalent to the 6.00 X 16 but I think that may be too wide for my 4 inch rim. I don't want the tire to balloon out on the sides. A bit might be OK but not too much. Greg Link to comment Share on other sites More sharing options...
trickydicky43richard Posted July 18, 2015 Share Posted July 18, 2015 Greg, Surely you have a range of 1/2 or 1 tonne Toyota/Mazda/Nissan etc tray back's/utes in the US of A. These smaller light commercial vehicles run Light Truck Tyres on various size rims including 16".Don't go over 205 wide as you risk interfering with mudguards/fenders on bounce, hard lock and/or chafing your brake hoses !!!Re previous post by Chris B and 47 Mopars, these wheels may have welded in centres and therefore "airtight" but my 39 has riveted in centres and so would all Mopars of that vintage. These riveted center versions would allow pressure to leak down thru and around any imperfect riveted connections.For an idea on LT tyres(tires) try the Aussie Ebay .. WWW.Ebay.com.au and type in 185 85 16 tyres for example You should find some Yokohama RYO1's for reference. Our dollar is so bad at the moment I wonder on smaller items Us buyers could take advantage, long shot though!!Rich Link to comment Share on other sites More sharing options...
Guest Posted July 18, 2015 Share Posted July 18, 2015 I'll give it a try Rich, thanks. How do you find those Yokohama's wear? Link to comment Share on other sites More sharing options...
Gary_Ash Posted July 18, 2015 Share Posted July 18, 2015 US car makers discontinued making or importing small pickups. Even the Japanese companies don't bring in the smaller SUV's. Actually, Richard, it seems that all of the trucks delivered in the US have big tires. Sometimes, GREAT BIG tires... Link to comment Share on other sites More sharing options...
trickydicky43richard Posted July 18, 2015 Share Posted July 18, 2015 OK I give up !!RichP.S Greg, re Yokohama tire wear, I maybe only do max 100 miles a month for Sunday drives so they will out last me. Link to comment Share on other sites More sharing options...
sambarn Posted July 20, 2015 Share Posted July 20, 2015 I'd give you my opinion on the best tire sources but I don't want to be yelled at so I'll politely keep it to myself. Link to comment Share on other sites More sharing options...
trickydicky43richard Posted July 20, 2015 Share Posted July 20, 2015 (edited) Come on Sam, dont keep it to yourself. Edited July 20, 2015 by trickydicky43richard (see edit history) Link to comment Share on other sites More sharing options...
Marty Roth Posted July 20, 2015 Share Posted July 20, 2015 If you must use tubes, be sure to first remove the paper tags which may be glued or vulcanized inside of your tires - they would otherwise squirm against the tube and cause the tube to leak. This happened to me with 3 new tires in less than 100 miles. I got new rims with silicone sealer and went back without tubes. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now