jackofalltrades70 Posted June 3, 2013 Share Posted June 3, 2013 Well, I told everyone that I might have a suprise yesterday on my other thread on the convertible. I just couldn't pass up this car. The price was right. The floors are solid as a rock, the seats are nice and the door panels need help. The carpet is o.k. It has a couple spots in the paint to fix, and a little bubbling on two or three spots. The frame is good and the motor compartment is o.k. All of the stainless is there and I will post newer pics after I get her cleaned up a bit. Needs new tires, but I already have a set. Has all of the lights and lenses. Needs a new trunk lock and I have to get keys made for it. After I spruce it up and drive it a bit, I will probably sell it. But, maybe wifey will like it and want to drive her. It's automatic and all. Maybe could also be the daughters car in a couple of years. Link to comment Share on other sites More sharing options...
JohnD1956 Posted June 4, 2013 Share Posted June 4, 2013 Nice find Matt. Of course, when you start to drive it you may be tempted to scavage the trans for your convertible. Link to comment Share on other sites More sharing options...
Guest 4 bufords Posted June 4, 2013 Share Posted June 4, 2013 good pics matt,4 bufords from ct Link to comment Share on other sites More sharing options...
smithbrother Posted June 4, 2013 Share Posted June 4, 2013 Can't wait to see it with 22" rims, chopped top, channeled, skirts, flames, and fuzzy dice, hehehe. We all know, IT TAKES A REAL MAN TO CUT ONE UP......Happy for you,Dale in Indy Link to comment Share on other sites More sharing options...
Nahuelsan Posted June 4, 2013 Share Posted June 4, 2013 Congratulations again, Matt! Amazing that dash, and the lenght of that speedometerBesides the the car is equiped with a wallet on the left side of the throttle pedal! Hahaha Link to comment Share on other sites More sharing options...
buick5563 Posted June 5, 2013 Share Posted June 5, 2013 Nice color Matt. More pictures of your freshly waxed car would be nice! Link to comment Share on other sites More sharing options...
jackofalltrades70 Posted June 5, 2013 Author Share Posted June 5, 2013 Well, I was up and at em' early this morning. At 5:45 I washed her up a little and by 6:30 she had been waxed up just a little. I pulled the plugs and sprayed some oil in the cylinders, just for good measure and will try to crank it over with the starter tomorrow. PO told me that the car was run a year or so ago, but better to be on the safe side. Check out the new pictures and maybe I will even be able to start her tomorrow afternoon late. The trunk still has the original panels inside. Seats are nice and still have to vacuum up the carpets, etc. The door panels are shot and I'll have to address them later. I found part of a gallon of Blue paint in the trunk. The white will probably be re-painted when I address the little rust issues. Enjoy the pictures. Link to comment Share on other sites More sharing options...
MrEarl Posted June 5, 2013 Share Posted June 5, 2013 Congrats Matt, that car doesn't look to have a lot of miles or like it has ever been abused. And from where I'm sitting the glass even looks pretty good. How's the headliner? I love it when folks save these 4 doors. Link to comment Share on other sites More sharing options...
jackofalltrades70 Posted June 5, 2013 Author Share Posted June 5, 2013 The windshield has two foggy areas on it and the rest of the glass is good except the drivers door. It has a little crack about where the door lock pull is. The headliner is intact, as are the sun visors. There is a little something on the headliner, but I think it will come off when I clean the interior good. The odometer says 71,900 and I would say that would be a correct # of miles, based on the rest of the car. It hasn't been on the road (legally) since 1989. I really like the 4 door car and have had a lot of compliments already from folks I work with. Should be a comfortable ride! Matt Link to comment Share on other sites More sharing options...
avgwarhawk Posted June 5, 2013 Share Posted June 5, 2013 She looks in great shape! Keep us posted on the clean up and starting of this old girl. She is sweet! Link to comment Share on other sites More sharing options...
JohnD1956 Posted June 6, 2013 Share Posted June 6, 2013 Matt, is it home yet? Link to comment Share on other sites More sharing options...
Guest Rob McDonald Posted June 6, 2013 Share Posted June 6, 2013 Nice friendly old car. I bet the rubber seals around the doors are poor, which would be why the door panels are damaged. The seats look great, like they've been professionally re-covered relatively recently. The free can of paint in the trunk could solve the puzzle of what colour to paint your convertible. You'd then have a matching set! Link to comment Share on other sites More sharing options...
NC-car-guy Posted June 6, 2013 Share Posted June 6, 2013 Awesome find! Link to comment Share on other sites More sharing options...
Buicknutty Posted June 6, 2013 Share Posted June 6, 2013 Great looking find, Matt. I used to own a '56 Special 4 door in early 70's, so it brings back some memories. It will be a nice cruiser when you get her going.Keith Link to comment Share on other sites More sharing options...
jackofalltrades70 Posted June 6, 2013 Author Share Posted June 6, 2013 Well, today started off as a rat race. When I got to work, I shot some more penetrating oil into the spark plug holes. At lunch time, while I ate my sandwich, I cranked the motor over to remove the penetrating oil and replaced the spark plugs and wires. I connected another fuel line to the fuel pump and put it into a gas can with fresh gas. Hit the carb with a small shot of ether AND...........................she fired right up! This afternoon, after work day was done, I replaced the flat tire with the spare and drove the little girl off the trailer, drover her around the plant and parked her back where the trailer had been before. Tranny was a little jerky, but JohnD1956 warned me of that, so it is either normal, or a little jumpy from sitting. The brakes worked fine, so my list of problems to check are diminishing. I will probably take my shopvac to work tomorrow to vacuum up the carpets cause it's bothering me seeing it dirty.The car will stay at my work until it is titled and licensed. Then and only then will it go home to suprise the wifey!Heres a couple more pics on the ground. Link to comment Share on other sites More sharing options...
Guest shadetree77 Posted June 6, 2013 Share Posted June 6, 2013 Then and only then will it go home to suprise the wifey!Whoa, whoa, whoa there. Wait a minute....she doesn't know yet!? You are a braver man than I sir! Anybody up there in PA have a couch Matt can sleep on for a few days? Lol. Just kidding buddy. The wives of car guys are generally an understanding bunch. They have to be if they want to keep their sanity. Nice find by the way! Good luck with her(and the wifey). Link to comment Share on other sites More sharing options...
Ben Bruce aka First Born Posted June 6, 2013 Share Posted June 6, 2013 NICE trunk latch!!!. Beautiful car. Ben Link to comment Share on other sites More sharing options...
avgwarhawk Posted June 6, 2013 Share Posted June 6, 2013 She has cleaned up nicely! Link to comment Share on other sites More sharing options...
jackofalltrades70 Posted June 6, 2013 Author Share Posted June 6, 2013 NICE trunk latch!!!. Beautiful car. BenTrunk latch had been "screwdrivered" by PO. So I took it out to get the spare to put on the car. New lock cylinder and key ordered. Didn't bring shop vac to work. Looks like rain this afternoon and evening. No work on this one today, but the 47' will get a lot of attention. Matt Link to comment Share on other sites More sharing options...
Nahuelsan Posted June 7, 2013 Share Posted June 7, 2013 Congratulations for that run up Matt!It's amazing... just a few things done on the engine and... voilà! Link to comment Share on other sites More sharing options...
jackofalltrades70 Posted June 8, 2013 Author Share Posted June 8, 2013 Well, after work today, I started her up again and really let her idle and warm up. The longer she run, the better she started to sound! The lifter noise and stumbles it had slowly worked their way out and it idles nicely. I need to give the transmission levels another look, and finish checking the lights, etc out on the car so I'll be able to get it inspected when I'm ready.I also was able to go and get the epoxy sealer, base coat and clear for the 47'. But, that's another thread! Matt Link to comment Share on other sites More sharing options...
smithbrother Posted June 8, 2013 Share Posted June 8, 2013 How does the bride like it?I know if I were to bring another one home, I would be in the world of HURT.Wishing you well,Dale in Indy Link to comment Share on other sites More sharing options...
MrEarl Posted June 8, 2013 Share Posted June 8, 2013 Well, after work today, I started her up again and really let her idle and warm up. The longer she run, the better she started to sound! The lifter noise and stumbles it had slowly worked their way out and it idles nicely. I need to give the transmission levels another look, and finish checking the lights, etc out on the car so I'll be able to get it inspected when I'm ready.I also was able to go and get the epoxy sealer, base coat and clear for the 47'. But, that's another thread! MattWow, I'm glad to see somebody can multi-task. Hope you keep it up Matt. That's the best prevention for BADD. Link to comment Share on other sites More sharing options...
Guest Higgs56 Posted June 13, 2013 Share Posted June 13, 2013 Great find Matt. Can't wait to see the continued progress on her! Link to comment Share on other sites More sharing options...
jackofalltrades70 Posted June 14, 2013 Author Share Posted June 14, 2013 I moved the car a little more today and noticed that the brakes weren't just right. I pulled the master cylinder because the rod was hard to push and carpet was hung up on it inside the body. The rubber bellows is no longer and the bushing plate in the end is shot. Cleaned it up and the rod moves well, just need a source for a rebuild kit. Anybody??? Link to comment Share on other sites More sharing options...
NC-car-guy Posted June 14, 2013 Share Posted June 14, 2013 Kanter.com rockauto.com and in my area even NAPA its only $18 Link to comment Share on other sites More sharing options...
jackofalltrades70 Posted June 15, 2013 Author Share Posted June 15, 2013 Wifey now knows about the car. Everything A. O. K. Link to comment Share on other sites More sharing options...
JohnD1956 Posted June 15, 2013 Share Posted June 15, 2013 Whew! You are one lucky guy! Link to comment Share on other sites More sharing options...
smithbrother Posted June 15, 2013 Share Posted June 15, 2013 Well, what a nice FATHER'S day gift, LOLHappy for YOU, bride TOOOOOOO,Dale in Indy Link to comment Share on other sites More sharing options...
jackofalltrades70 Posted June 16, 2013 Author Share Posted June 16, 2013 New master cylinder ordered from Kanter. Be here Tuesday or Wednesday??? Meanwhile, Monday I will pump out the gas tank and clean it and seal it. I think the pickup might be bad or I may have a hole in the line somewhere. The tank has to have about 1/2 tank of old stuff, but the electric pump won't pull anything. Needs to be dropped and cleaned anyways to be safe. Runs nice on a gas can though. I have a small drip when it rains inside the car. I think its the windshield seal, thus the cloudy windshield. I'll have to pull the stainless and check the seal condition, possibly seal it with some chewing gum or something! hehe. Fathers day car show tomorrow, so I won't be working on anything tomorrow. Just driving one of my friends babies. Happy Fathers Day to all my good friends on here! Matt Link to comment Share on other sites More sharing options...
JohnD1956 Posted June 16, 2013 Share Posted June 16, 2013 Thank you, and Happy Fathers Day to you too Matt. Link to comment Share on other sites More sharing options...
buick5563 Posted June 16, 2013 Share Posted June 16, 2013 Hey Matt,First have the tank boiled out at a radiator shop and have it checked for leaks. They may solder any holes for you so you don't need to seal it. I haven't had luck with the DIY sealers. Link to comment Share on other sites More sharing options...
Buicknutty Posted June 16, 2013 Share Posted June 16, 2013 Happy Father's Day to you too!Keith Link to comment Share on other sites More sharing options...
Nahuelsan Posted June 16, 2013 Share Posted June 16, 2013 Happy Father´s day, Matt. I hope you spend it GREAT!!! Link to comment Share on other sites More sharing options...
jackofalltrades70 Posted June 18, 2013 Author Share Posted June 18, 2013 Ok, not what I wanted to hear today, but Kanter doesn't have any master cylinders to sell, they only can rebuild my unit, which means I lose 2-3 weeks sending it and then them rebuilding it, etc. In the meanwhile, I pumped out the tank today and will try to pull it out tomorrow. I also managed to work on the "horrible" chrome on the front of the car. It is/was and forever will be in horrible shape. I just want to keep it from getting any worse. Here are some pictures of the procedure for cleaning rust off of the bumper today without killing myself. I used clr and a copper brillo pad. I then rinsed off the clr and polished it with Mother's polish. Enjoy the crappy pictures. Matt Link to comment Share on other sites More sharing options...
NC-car-guy Posted June 18, 2013 Share Posted June 18, 2013 why don't you rebuild it yourself? Link to comment Share on other sites More sharing options...
1956century Posted June 18, 2013 Share Posted June 18, 2013 why don't you rebuild it yourself?No one sells a kit. It's a one year only master. Link to comment Share on other sites More sharing options...
jackofalltrades70 Posted June 18, 2013 Author Share Posted June 18, 2013 Noone, including napa list a brake kit. My car is a manual brake car. I saw a 56 convertible over the weekend that had power brakes. But, mine doesn't. Matt Link to comment Share on other sites More sharing options...
NC-car-guy Posted June 18, 2013 Share Posted June 18, 2013 AH! Thanks 1956century. Both my specials are 55's..... sorry for your delay man! Link to comment Share on other sites More sharing options...
jackofalltrades70 Posted June 19, 2013 Author Share Posted June 19, 2013 I pulled the gas tank this afternoon and will take it to the radiator shop tomorrow. It's leaking at the seam. I also found out why the fuel gage wasn't working. Ground wire pulled loose. Hopefully they can fix the tank. I don't wanna buy a new one. I took the master cylinder apart, bench tested it and don't see much, if anything wrong with it. I put it back on the car and will try to bleed the brakes out over the week to see if it gets better pedal and consistent pedal. Matt Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now