Steve Braverman Posted February 21, 2010 Share Posted February 21, 2010 I've never owned a Packard, but I guess I'll ask the man who owns one if fifteen grand is a good price for a new carburetor.1930 PACKARD SPEEDSTER MODEL 734 OPERATIONAL CARBURETOR : eBay Motors (item 260554644407 end time Feb-26-10 19:43:43 PST) Link to comment Share on other sites More sharing options...
R Walling Posted February 21, 2010 Share Posted February 21, 2010 "Stand not included" There goes my bid, I thought it would make a nice paper weight on my desk. Link to comment Share on other sites More sharing options...
rocketraider Posted February 21, 2010 Share Posted February 21, 2010 It's like fishing, Steve. You dangle the right bait, you'll eventually get a bite.In some circles, $15,000 is like $150 would be to normal people. Link to comment Share on other sites More sharing options...
Restorer32 Posted February 21, 2010 Share Posted February 21, 2010 I suggest before laughing at the price you might think about the hours that went into its creation. Let's say you could get this work done at $50/hour. That allows 300 hours labor for all the set up, machining, finishing and assembly and testing. Don't forget all the jigs and fixtures that had to be built. How about the special cutters etc that had to be ground? Yea, it seems like a lot of money but the builder is certainly not getting rich off this thing. A CNC machine is not some magical device where you toss in an original part and a finished replacement tumbles out the other end. Maybe, and just maybe if the builder sells a couple of these he might make a profit. Unlikely there is ANY profit in this, I assume, first example produced. I applaud the effort. Appears to be beautiful craftsmanship. Link to comment Share on other sites More sharing options...
Larry Schramm Posted February 21, 2010 Share Posted February 21, 2010 I would say that it is more of a work of art than a part to be used on a vehicle. Link to comment Share on other sites More sharing options...
West Peterson Posted February 21, 2010 Share Posted February 21, 2010 (edited) It takes a unique manifold to go along with it, too. Exhaust and intake are two separate units. It's one of the main features of the speedster series, and I'd say about half of the existing speedsters do not have it (them). However, the number of existing speedsters is less than 20, in all body styles. I remember the cost of getting this original one rebuilt (major MAJOR rebuild) some 20-25 years ago. It seems like a bargain now, but back then it was absurd. Edited February 21, 2010 by West Peterson (see edit history) Link to comment Share on other sites More sharing options...
Seldenguy Posted February 22, 2010 Share Posted February 22, 2010 Aren't we looking at a $500,000 plus car, that might need it to make it as delivered from the factory.(AACA) I really doubt that all 20 cars known are complete as delivered. ---Bob Link to comment Share on other sites More sharing options...
alsancle Posted February 22, 2010 Share Posted February 22, 2010 When I saw the ad I assumed that the speedsters had special carbs that are made of unobtainium. It's worth the 15k if your speedster is missing the original for sure. Link to comment Share on other sites More sharing options...
TexRiv_63 Posted February 22, 2010 Share Posted February 22, 2010 Was the Packard Speedster the only car that used the Detroit Lubricator 2-barrel? Link to comment Share on other sites More sharing options...
Curti Posted February 22, 2010 Share Posted February 22, 2010 I suggest before laughing at the price you might think about the hours that went into its creation. Let's say you could get this work done at $50/hour. That allows 300 hours labor for all the set up, machining, finishing and assembly and testing. Don't forget all the jigs and fixtures that had to be built. How about the special cutters etc that had to be ground? Yea, it seems like a lot of money but the builder is certainly not getting rich off this thing. A CNC machine is not some magical device where you toss in an original part and a finished replacement tumbles out the other end. Maybe, and just maybe if the builder sells a couple of these he might make a profit. Unlikely there is ANY profit in this, I assume, first example produced. I applaud the effort. Appears to be beautiful craftsmanship.Very well said! If you own Packard speedster and you need the carburetor Step up to the plate and pay the price. When you play with big dogs, you get big fleas. Link to comment Share on other sites More sharing options...
Barry Wolk Posted February 22, 2010 Share Posted February 22, 2010 I would say that it is more of a work of art than a part to be used on a vehicle.I concur. It is striking. Link to comment Share on other sites More sharing options...
West Peterson Posted February 22, 2010 Share Posted February 22, 2010 Was the Packard Speedster the only car that used the Detroit Lubricator 2-barrel?The Detroit Lubricator Model 51 i believe was only used on the 1930 Packard speedster. I think that the original version of the Model 51 was made of pot metal. They soon realized it needed to be made of brass. This car has been owned by only two people in the last 60 years, and during that time a spare original carburetor has never been located. The original carburetor for this car was in very, very sad shape, but there was enough to rebuild it back in the late 1970s. Link to comment Share on other sites More sharing options...
alsancle Posted February 22, 2010 Share Posted February 22, 2010 It's the same issue with the carbs that went on the blower Stutz. It's unique & unobtainable since they were originally pot metal and just disintegrated. Link to comment Share on other sites More sharing options...
Barry Wolk Posted February 24, 2010 Share Posted February 24, 2010 I just got my T-pot back from Pony. Thought they did a beautiful job. While not as drop-dead gorgeous as the Oiler, it is pretty neat. It's almost too pretty to use. Link to comment Share on other sites More sharing options...
West Peterson Posted February 24, 2010 Share Posted February 24, 2010 Obviously knows what he's doing. Beautiful work. Link to comment Share on other sites More sharing options...
Earl B. Posted February 26, 2010 Share Posted February 26, 2010 West, the model 51 was used on the 1932 900,901,902 also..alas, still with much potmetal used in its construction.... B Link to comment Share on other sites More sharing options...
West Peterson Posted February 27, 2010 Share Posted February 27, 2010 West, the model 51 was used on the 1932 900,901,902 also..alas, still with much potmetal used in its construction.... BEither I'm wrong about calling the speedster carb a Model 51 or it's an entirely different carb. I really don't think they're the same, or speedster owners wouldn't have a problem finding the correct carburetor. Link to comment Share on other sites More sharing options...
Restorer32 Posted February 27, 2010 Share Posted February 27, 2010 There are 19 or so different versions of the Model 51 Detroit Lubricator. Used on almost all Packards fro 1930 or so thru 1932. Some Cadillacs also used a Model 51 as did Graham Paige. Link to comment Share on other sites More sharing options...
Restorer32 Posted February 27, 2010 Share Posted February 27, 2010 All the same but different. Link to comment Share on other sites More sharing options...
West Peterson Posted February 27, 2010 Share Posted February 27, 2010 Are they all dual throat? Link to comment Share on other sites More sharing options...
Restorer32 Posted February 27, 2010 Share Posted February 27, 2010 No. I have never seen a dual throat Detroit Lubricator before. I suspect specific to the Speedster, thus the rarity? Link to comment Share on other sites More sharing options...
West Peterson Posted February 27, 2010 Share Posted February 27, 2010 Thus the rarity. Link to comment Share on other sites More sharing options...
Marty Roth Posted February 27, 2010 Share Posted February 27, 2010 (edited) West,The 1930, and several newer years do use the Detroit Lubricator Model 51, as does my 1930 Model 733, but they are for the most part a Single throat version. I was fortunate enough to contact a gentleman in Sparks, Nevada who created a proper needle, seat, and float for my rebuilding effort. The prior aluminum replacement float seam had started leaking and the needle had developed a "Sticking" problem. His viton-tipped needle and its seat, together with his newly-crafted jewel-like brass float assembly solved my problem. I works like a charm and drove beautifully on the AACA Vintage Tour. It should be in Louisville, entered in DPC.He explained to me about the rarity and complexity of the SPEEDSTER 2-Barrel (Dual Throat) carburetor, and how his project was advancing. Apparently the dual throat version of the Detroit Lubricator was quite advanced for its era, and as discussed already, it is extremely rare, and suffered the same fate as its more-commonplace version due to the potmetal construction, of which you are already aware. Edited February 27, 2010 by Marty Roth tried, couldn't include new photo (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now