-
Posts
1,036 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Everything posted by jan arnett (2)
-
Does anyone have experience sewing plastic windows for side curtains. I am doing a 1923 Dodge Screen Side Pickup.
-
Getting to the end of a 25 year project and I have an interesting challenge for my 1923 Dodge screen side. There were no side curtains with it when I pulled it from the barn. It has various snaps and fastners which I have but there is one I can not identify. On the bottem of the side curtain and in various other locations it has the following fastiner which I am unfamilar with. It is neither lift a dot or murphy, what is it and where would I get the female part.
-
1914 Brass Buick
jan arnett (2) replied to Bruce Hatfield's topic in Our Cars & Restoration Projects
David is absolutely correct. If it does not have sentiment attached and you don't want to do it yourself you are better off buying a restored car and enjoying it right away. -
Pressure washer can be rented quite cheaply. I use green magic.
-
Mark great job and great pictures. Now that it is warm I am going to start o mt 1923 Moon touring g and your photo's will be invaluable. How much material did it take. I have made up my patters and I used Ram Board for patterns. Have a great touring season. Jan
-
Try electrolysis and use a baby swimming pool
-
Wanted - Door Latchs 1923 Dodge Screenside
jan arnett (2) replied to jan arnett (2)'s topic in Dodge & Dodge Brothers
Thanks for finding those but they have levers on the inside but mine has a door handle on the inside. Once again thanks for trying. -
Gabriel Snubbers rebuilding & installation mid 20's Buick
jan arnett (2) replied to Hubert_25-25's topic in Buick - Pre War
I have used seat belt material. -
-
I am need door latches for my n1923 Screenside doors.
-
-
Have you tried leaving it in the sun or heat lamps. I have used hair dryers. Don't use a heat gun as then may get too hot.
-
Someone cut the end of the lower half of the spare tire mount off, I need the bracket, bracket hardware and a spare tire rim for my 1923. The full picture is not mine but has a clear picture of what I need.
-
Dodge Bros. Screen Side parts and information needed
jan arnett (2) replied to alsfarms's topic in Dodge & Dodge Brothers
I am restoring a 23 screen side and can probably help you. -
Looking for a starter for my 1923 Moon 6/40, 6 volt.
-
1923 Dodge Screenside tailight
jan arnett (2) replied to jan arnett (2)'s topic in Dodge & Dodge Brothers
nice -
1923 Dodge Screenside tailight
jan arnett (2) replied to jan arnett (2)'s topic in Dodge & Dodge Brothers
SINCE i am going to put brake lights on it and turn signals I will use what I have, Thanks Jan -
I have been told I have the wrong tailight for a 1923 Screenside, I have the round type B which came with the car. What is correct?
-
First off there probably is a terminology problem. What you are referring to is a top and the metal pieces are irons with the bows being fitting in the sockets at the end of the irons. You look like your windshield frame is homemade and not designed to be used with a roadster top.. I have a screen side pickup so any pictures I would take would be wrong. You would be better off finding a roadster/touring windshield and the correct bows and irons. Rember that the top is tacked to a tack rail which is on top/behind rear seat which creates another problem because you do not have one. You mentioned that you want the top removal which is call a California top which is a different problem for you