27oldsman Posted June 13, 2006 Share Posted June 13, 2006 I have been searching for years for a flexible fabric cords rubberized disk (whatever you want to call it) universal joint. It is for on my 1927 Oldsmobile. I have no idea what other years this style was used or if other makes shared it.What I have now is deteriorated and the plies are separating. This is actually two disks stacked together. I want to keep it original. If I cannot find this item then I will have to make some myself. The problem with that is finding an appropriate material.Does anyone know what other makes may have used this? Or if anyone is reproducing it?Dave NeuhausRapid CNC Link to comment Share on other sites More sharing options...
Mike Cullen Posted June 13, 2006 Share Posted June 13, 2006 How about using one of those "Help" parts, available at most auto parts chains. "Universal Flexible Steering Shaft Coupler" (rag-joint repair kit) If that won't work for you, try cutting two circles out of a heavy-duty truck tire sidewall with a hole saw, glue together rubber to rubber, drill as needed to bolt up to your flanges. Link to comment Share on other sites More sharing options...
27oldsman Posted June 13, 2006 Author Share Posted June 13, 2006 I forgot to mention that it is 6" in diameter. Link to comment Share on other sites More sharing options...
Jay Wolf Posted June 13, 2006 Share Posted June 13, 2006 I used 2 layers of heavy duty corded mud flap for a truck I got a Rural King. Link to comment Share on other sites More sharing options...
Tom M Posted June 13, 2006 Share Posted June 13, 2006 This was posted in a thread that I have on the Packard Forum. Would this work?<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">The reinforced rubber sheet (the reinforcement is called scrim) is made today for industrial belting - conveyors and such. </div></div> Link to comment Share on other sites More sharing options...
Layden B Posted June 13, 2006 Share Posted June 13, 2006 During the depression they were usually cut from the sidewall of a tire! Conveyor belting as suggested would be more regular in thickness. Link to comment Share on other sites More sharing options...
27oldsman Posted June 14, 2006 Author Share Posted June 14, 2006 Thanks for all the replies. I thought about conveyor belts, but I think they are usually too thin. For this application it needs more cords than rubber. The downside to using a tire sidewall is getting it to look nice/original when it is done. I don't think it would be too easy to cut a perfect circle in a truck tire. But then again maybe it's not as difficult as I imagine.The whole spacing is critical. That's not a problem for me since I have my own CNC mill to do it on, so I guess I should quit my whining and do it. If I do make some I would like to make a bunch extra to sell, but not if I have to trace and cut with a razor knife. That would suck.David NeuhausRapid CNC Link to comment Share on other sites More sharing options...
Terry29-26 Posted June 14, 2006 Share Posted June 14, 2006 Use a hole saw to cut it out. tractor tires make good replacement couplers.Terry 29-26 Link to comment Share on other sites More sharing options...
ply33 Posted June 14, 2006 Share Posted June 14, 2006 I have heard that the fabric joint replacements for 1928-30 Plymouths are still available from John Deere. Part number L373T (apparently for a 1940 John Deere LA tractor). However I have also heard that it is quite expensive. Link to comment Share on other sites More sharing options...
8BALL_olson Posted June 18, 2006 Share Posted June 18, 2006 check with eqipment rental places , there are rag joints in trenchers , tillers , etc . even on ebay you can find these joints for vintage tractors , implements . ABD IT'S NOT WHINING . it's expressing your innermost needs and wants . WHINING ? NOPE . Link to comment Share on other sites More sharing options...
Guest imported_Jaybird29 Posted June 19, 2006 Share Posted June 19, 2006 Try Collectors Auto !!1 -888-772-7848 They also have a web site !! <img src="http://forums.aaca.org/images/graemlins/wink.gif" alt="" /> Link to comment Share on other sites More sharing options...
SamB Posted June 20, 2006 Share Posted June 20, 2006 The 1925-1927 Studebaker Standard Six model's used this type of drive shaft coupling. It was probley used for other Studebaker model years. I bought a complet set for my 1927 Studebaker off of ebay. I have also seen an add in Hemming's Motor News selling these disk. You may try calling Steven Munts as he may have these disk. His phone # is 509-892-9258. I got some small disk that drives the accessary package on the standard six motor from him. I hope that this will help.Regards:SamB Link to comment Share on other sites More sharing options...
27oldsman Posted February 11, 2010 Author Share Posted February 11, 2010 Update.I found a source for new professionally made discs. They are now available here Universal Joint Flex DiscThank you for the tip on John Deere tractors using them. It's still available from them also but at 4X price, $190 each!!! I think I will pass on JD's.Dave Link to comment Share on other sites More sharing options...
Rich Janouskovec Posted February 12, 2010 Share Posted February 12, 2010 There is a gentleman in Cleveland Ohio that will make those fore you I have his phone no. if you e-mail me. put fabric u-joint in the sublect so I know who it is. e-mail capricorn48@windstream.net Link to comment Share on other sites More sharing options...
Larry Schramm Posted February 12, 2010 Share Posted February 12, 2010 How about getting the conveyer belt material and using a band saw to cut it out along with the drill and hole saw? Link to comment Share on other sites More sharing options...
mribbich@wi.rr.com Posted February 12, 2010 Share Posted February 12, 2010 I have U-joint discs for all types of cars and trucks. Thanks!!! mribbich@wi.rr.com 1-262-392-2989Marv. Link to comment Share on other sites More sharing options...
Ronabi Posted February 12, 2010 Share Posted February 12, 2010 How about using one of those "Help" parts, available at most auto parts chains. "Universal Flexible Steering Shaft Coupler" (rag-joint repair kit) If that won't work for you, try cutting two circles out of a heavy-duty truck tire sidewall with a hole saw, glue together rubber to rubber, drill as needed to bolt up to your flanges.Wouldn't truck mud flaps work better? In cutting rubber freeze it first; then it's like cutting a piece of wood. Link to comment Share on other sites More sharing options...
27oldsman Posted February 12, 2010 Author Share Posted February 12, 2010 I revived this old post because I have found a source for them here Universal Joint Flex Disc. I have what I need now. They are show quality with crisp edges and holes exactly positioned where they belong. In my research on these discs I have discovered just how very prevalent these were in the late 20s. I am pretty sure this exact disc was used on the following vehicles:1925-27 Oldsmobile1925-27 Studebaker1924-27 Chrysler four cylinder model 50 & 521924-27 Maxwell four cylinder1928-30 Plymouth Q U 30-U up to 1561283 U.S built and all Canadian built1926 Nash1922 Reo1940 John Deere LA tractorCan anyone add to this list or expand the years used?The discs are 6 inch od and have 6 holes at 4-5/8 inch diameter. Link to comment Share on other sites More sharing options...
1922bigsix Posted February 13, 2010 Share Posted February 13, 2010 Look on ebay or the studebaker forum for flexible discs. There are some for sale. Link to comment Share on other sites More sharing options...
Rich Janouskovec Posted February 13, 2010 Share Posted February 13, 2010 1929-1931 Oldsmobile Link to comment Share on other sites More sharing options...
Guest broker-bob Posted February 13, 2010 Share Posted February 13, 2010 E mail me------------- bobnroman@yahoo.com --I know some one who makes them-----------------------BR Link to comment Share on other sites More sharing options...
Guest LARS A Posted March 7, 2010 Share Posted March 7, 2010 Check out the following web site. I just found this web site hope it help.Universal Joint Flex DiscLarry Link to comment Share on other sites More sharing options...
JFranklin Posted March 7, 2010 Share Posted March 7, 2010 This fellow has different size fabric disks for sale maybe some for your car. mribbich@wi.rr.com Link to comment Share on other sites More sharing options...
1922bigsix Posted March 9, 2010 Share Posted March 9, 2010 There are some for sale on ebay under studebaker parts Link to comment Share on other sites More sharing options...
Guest bosky Posted February 19, 2011 Share Posted February 19, 2011 Just spent most of today getting off the rear fabric universal on our 1925 Willys Knight tourer - they are a tad fraid and causing a lot of vibration. Did the front ones back in the '80s and fortunately made spares, so hopefully tomorrow I will be able to re-install things with the new pieces that were sitting under the seat. The reason for my input is to say that back then when I got the material to make the fabric rings I was told you must use power transmission belting, never conveyor belting or anything else. The front ones have done about 20,000 miles now and look as good as the day I put them in.Making them was fairly easy, just took a bit of time. Drew up inner and outer circles on the belting with pencil, marked very carefully the diagonals passing through the stud holes and drew a square box on each one at the correct PCD to match the arms of the tailshaft and the gearbox/rear axle arms. A piece of exhaust tubing of the right diameter for the centre hole was sharpened on one end and a press used to punch out the centre of each ring. A small cutter was then used in the same way for the 6 outer holes using the square boxes as a guide to ensure they were in the right place. Can't remember what I used to cut the outside circle now.Hopefully my back will still be in one piece tomorrow night once I get the job finished! Link to comment Share on other sites More sharing options...
Ronabi Posted February 26, 2011 Share Posted February 26, 2011 Try this place, they may be able to help you.http://www.maritimedragracing.com/HTMLobj-18132/U-jointDiscAD-B.pdf Link to comment Share on other sites More sharing options...
Guest koa Posted October 6, 2011 Share Posted October 6, 2011 My friend took some burlap fabric, and cut out multiple circles to match his pattern until he reached the proper thickness. He then cut out the bolt holes and lightly coated each piece with tar. He placed a washer over the holes on every other sheet. Once the right thickness was reached again he placed it on a piece of plywood, put another piece on top and parked his truck on it overnight. It’s been five years and it still is holding together, although I might be changing it out next year. It took some time but, it looks original. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now