alsancle Posted July 6, 2019 Share Posted July 6, 2019 So I just found out that a guy I know is an all around Sleeve Valve guru. I've always thought the Stearns was cool, but he was talking up the Willys Knight. Does anybody on here own one of the big sixes that are considered Classics by the CCCA? Would love some first hand experiences. Also, I need some to explain the differences between the 66, 66A and 66B. They seem to have come with some pretty attractive bodies. Link to comment Share on other sites More sharing options...
alsancle Posted July 6, 2019 Author Share Posted July 6, 2019 More. Link to comment Share on other sites More sharing options...
Steve_Mack_CT Posted July 6, 2019 Share Posted July 6, 2019 Really like the 3 window coupe! Link to comment Share on other sites More sharing options...
alsancle Posted July 6, 2019 Author Share Posted July 6, 2019 12 minutes ago, Steve_Mack_CT said: Really like the 3 window coupe! Agreed Steve. I remember when it was in Hemmings for 40k and I thought what a deal that was for an interesting, attractive full Classic. https://bringatrailer.com/2016/07/05/sleeve-valve-six-1930-willys-knight-66b-rumble-seat-coupe/ Link to comment Share on other sites More sharing options...
John_Mereness Posted July 9, 2019 Share Posted July 9, 2019 Cool you started this post - neat cars !!! Link to comment Share on other sites More sharing options...
alsancle Posted July 10, 2019 Author Share Posted July 10, 2019 7 hours ago, John_Mereness said: Cool you started this post - neat cars !!! we need to attract someone that has actually owned a car to comment. Link to comment Share on other sites More sharing options...
John_Mereness Posted July 10, 2019 Share Posted July 10, 2019 Never owned one or driven/ridden in one, but saw quite a few of them at at WOKR meets and always attracted to the few I see out at Concours events. Link to comment Share on other sites More sharing options...
58L-Y8 Posted July 10, 2019 Share Posted July 10, 2019 A.J. Prior to 1925, W-K were four cylinder, lower-middle-priced cars.. In an effort to capitalize on the rising apparent prosperity, they added the six cylinder 236.4 ci Model 66 126" wb priced around $2K. This held through the 1927 66A even as the prices rose. For 1928-'29, it was designated Great Six 66A, the bore increased for 255 ci. and a 135" wb model added. These were competition for Studebaker President FA/FB, Auburn 88/115, Graham-Paige 629/827, Kissel 8-80, Hupmobile E-3/Century 125, Gardner 8-90/8-90, basically all those heretofore medium-priced makes taking a run at the entry-level 'luxury' segment. For 1930-'31, it became Model 66B, reduced only to a five body style 120" wb line, priced uniformly at $1,895. Best of all, it received that elegant styling by Amos Northup of Murray Corporation, which didn't last long. W-O was experiencing the affects of the Depression, restyled it into the 66D during '31, carried through '32 and petered out as a 66E sedan only for 1933. Like all small producers, W-O was generating new model lines during 1931'32 like mad to try and capture more sales. Even went so far as to offer the Continental-engine Willys 8-80 as a bid for eight cylinder buyers. W-O had acquired Stearns-Knight in late 1925 as its prestige line. Turned out Stearns-Knight was an archaic, terribly inefficient operation, a money pit for W-O to keep alive. In addition to their six, the Model G-8 sleeve-valve straight eight was added for 1928, becoming the Model H 137" wb and Model J 145" wb in the $5,500 range. But, among the most obscure of the obscure are the 1929 M-6-80, 126" wb and N-6-80, 134" wb, 255 ci six, sound familiar? At $2,500-$2,900, these were not much more than badge-engineered, restyled 66A, maybe with nicer appointment. It was all for naught, Stearns-Knight shut down at the end of 1929. This is my analysis from reading the spec's and Standard Catalog of American Cars 180-1942, edited by Kimes and Clark. A great Stearns-Knight article by Dr. Robert Ebert in the Automotive History Review by the Society of Automotive Historians informs this synopsis. Steve 2 Link to comment Share on other sites More sharing options...
edinmass Posted July 11, 2019 Share Posted July 11, 2019 The W-K build quality on the large cars was way above average. The eight was very very well done. Rare is an understatement, and it’s one of the weird CCCA platforms I have never driven or serviced. I have a friend who has one of the famous W-K eights, and he has a very diverse collection of great cars. He said it’s under powered. Link to comment Share on other sites More sharing options...
alsancle Posted July 11, 2019 Author Share Posted July 11, 2019 2 hours ago, edinmass said: I have a friend who has one of the famous W-K eights, and he has a very diverse collection of great cars. He said it’s under powered. It is a Continental, right? WK didn't make an eight as far as I can tell. The only sleeve valve eight was the Stearns and Minerva. Maybe Voisin too? And how come the later didn't have to be called Minerva-Knight? I thought that was part of the patent license deal. Link to comment Share on other sites More sharing options...
edinmass Posted July 11, 2019 Share Posted July 11, 2019 (edited) AJ, not sure about the eight, as I have never seen one in person that I am aware of. I have seen a Sterns eight, but just in a museum, behind the rope. They basically don’t exist out side of museums. PS- After forty years I was able to check off one of the final legendary platforms that I had never driven or played with. A Alfa supercharged with a one off body, very cool. Fast and nimble, but as far as SOME of the workmanship was so-so. Edited July 11, 2019 by edinmass (see edit history) Link to comment Share on other sites More sharing options...
58L-Y8 Posted July 11, 2019 Share Posted July 11, 2019 The sleeve-valve straight eight Stearns-Knight was their own manufacture. The Willys 8-80 engine was a Continental Model 14W 245,4 ci. L-head, poppet-valve straight eight powering the Willys 1931-'32 8-80, 8-80D, & 1932-'33 8-88, 8-88A. One appeared on the Hershey show field during that rain-off year, iirc 2005. The short-lived '29 Stearns-Knight M-6-80 & N-6-80 were simply W-K 66A wearing a S-K radiator and trim for a premium price. Love the most obscure of the obscure! Steve 1 Link to comment Share on other sites More sharing options...
alsancle Posted August 18, 2019 Author Share Posted August 18, 2019 2 Link to comment Share on other sites More sharing options...
58L-Y8 Posted August 18, 2019 Share Posted August 18, 2019 Thanks AJ for the look at one of the most interesting Willys-Knights, the 66B plaid-side roadster. Medium-priced car though it was, it offered buyers style well beyond its price class. Amos Northup, you done good! We'll never forget you. 1 Link to comment Share on other sites More sharing options...
alsancle Posted October 10, 2019 Author Share Posted October 10, 2019 At Hershey in the Dragone tent. 1 Link to comment Share on other sites More sharing options...
8E45E Posted October 10, 2019 Share Posted October 10, 2019 (edited) On 7/6/2019 at 4:11 PM, alsancle said: Agreed Steve. I remember when it was in Hemmings for 40k and I thought what a deal that was for an interesting, attractive full Classic. https://bringatrailer.com/2016/07/05/sleeve-valve-six-1930-willys-knight-66b-rumble-seat-coupe/ Nice dash! Replacing that square opening in the middle holding all the instruments with a touchscreen will instantly make it 21st Century modern and give Tesla's dashboard design a run for their money!! Craig Edited October 10, 2019 by 8E45E (see edit history) Link to comment Share on other sites More sharing options...
John_Mereness Posted October 11, 2019 Share Posted October 11, 2019 19 hours ago, alsancle said: At Hershey in the Dragone tent. Cool car - it is going to need some wood, metal, and welding though. I thought they sold that a year or so ago - thanks for taking the pictures. Link to comment Share on other sites More sharing options...
alsancle Posted October 11, 2019 Author Share Posted October 11, 2019 4 hours ago, John_Mereness said: Cool car - it is going to need some wood, metal, and welding though. I thought they sold that a year or so ago - thanks for taking the pictures. Yeah. But it needs a lot! Link to comment Share on other sites More sharing options...
edinmass Posted October 12, 2019 Share Posted October 12, 2019 (edited) I was poking around in the engine of one of these in California a few weeks ago. Neat and interesting cars.............the original car in this post will probably never find a collector willing to throw down and restore it..........there are a handful of restored ones available for purchase at less than twenty five percent of the cost to restore one. When you talk about a small market, this car defines the term. Mechanically interesting, open car, rare, decent lines.......it has almost everything.....except large size and displacement thus it’s relegated to the corner of most collections. Edited October 12, 2019 by edinmass (see edit history) 1 Link to comment Share on other sites More sharing options...
John_Mereness Posted October 12, 2019 Share Posted October 12, 2019 (edited) 5 hours ago, edinmass said: I was poking around in the engine of one of these in California a few weeks ago. Neat and interesting cars.............the original car in this post will probably never find a collector willing to throw down and restore it..........there are a handful of good ones available for purchase at less than twenty five percent of the cost to restore one. When you talk about a small market, this car defines the term. Mechanically interesting, open car, rare, decent lines.......it has almost everything.....except large size and displacement thus it’s relegated to the corner of most collections. I slightly disagree given I went on a few quest for rare Willys-Overland Knight products as a kid - depending on price it will find someone to restore as incredibly rare and cool car, but that person best be in the position to find a 66B parts car (which is hard in itself as also rare and I see more ragged out ones than anything immediately presentable/drivable) and then if they are just a backyard hobbyist the question comes up of if they can finish the car in their lifetime. As you know, I have taken on some rough cars in short time periods and it takes a village of people, incredible time, incredible resourcefulness, and unfortunately very deep pockets (I also like to refer to is as the "hard come easy go accounting method"). When I say incredible resourfullness, as you know it takes near miracle working to attack a problem and address it in a way that keeps everyone else in chain gang moving on their projects (ie a roadblock often quickly compounds a timeline, enthusiasm, and ...). Sidenote: Most of those people I went on WOKR quests with are now in their late 70's to early 80's and a large number of them are now deceased. Last time I hung out in the WOKR tent at Heshey was in the early 1980's - as a kid. Edited October 12, 2019 by John_Mereness (see edit history) Link to comment Share on other sites More sharing options...
alsancle Posted October 12, 2019 Author Share Posted October 12, 2019 1 hour ago, John_Mereness said: Last time I hung out in the WOKR tent at Heshey was in the early 1980's - as a kid. It is still sitting in the Red field over by the stadium. Link to comment Share on other sites More sharing options...
John_Mereness Posted October 12, 2019 Share Posted October 12, 2019 12 minutes ago, alsancle said: It is still sitting in the Red field over by the stadium. Use to have a great time visiting WOKR tent - nice group of people Link to comment Share on other sites More sharing options...
John_Mereness Posted October 12, 2019 Share Posted October 12, 2019 As to if the car is still sitting, that would be because in many ways it is pretty solid for an unrestored 30's car, but in other ways it needs a ton of sheetmetal and woodwork in all the wrong ways. Link to comment Share on other sites More sharing options...
edinmass Posted October 12, 2019 Share Posted October 12, 2019 I like the car......it’s more interesting than the usual run of the mill thing we regularly see. W-K cars are like Cunningham, Marmon, and such brands. Not much help, a possible few gurus, and just about zero parts supply used or reproduction. It’s not a car to take on as your first restoration......or second or third. There are no easy restorations, and this one will challenge anyone. It would be worth the effort............. 1 Link to comment Share on other sites More sharing options...
DLynskey Posted October 13, 2019 Share Posted October 13, 2019 (edited) This 1929 Willys Knight was for sale locally a while back. What model would it be? Is it a "classic" model? The engine was disassembled, obviously had problems. There's a good chance it has a small block Chevy in it by now. Don Don Edited October 13, 2019 by DLynskey (see edit history) Link to comment Share on other sites More sharing options...
K8096 Posted October 14, 2019 Share Posted October 14, 2019 Here's an interior shot of that roadster. 1 Link to comment Share on other sites More sharing options...
edinmass Posted October 14, 2019 Share Posted October 14, 2019 (edited) Just got to love those easy restorations...........its gonna take someone a long time and very deep pockets to park that one on the 18th green at Pebble! Edited October 14, 2019 by edinmass (see edit history) Link to comment Share on other sites More sharing options...
alsancle Posted October 14, 2019 Author Share Posted October 14, 2019 1 hour ago, edinmass said: Just got to love those easy restorations...........its gonna take someone very time and deep pockets to park that one on the 18th green at Pebble! 40 years ago that car might have been restored. The original leather was red, but I couldn't get a bead on the outside although it may have been black. Link to comment Share on other sites More sharing options...
edinmass Posted October 14, 2019 Share Posted October 14, 2019 I walked past the car and didn’t stop to look as it was drawing too many flies.............it’s too interesting of a car to leave it the way it is, maybe just a canvas interior and quick fluff to drive and use as is? Time will tell....... Link to comment Share on other sites More sharing options...
John_Mereness Posted October 16, 2019 Share Posted October 16, 2019 On 10/14/2019 at 12:58 PM, edinmass said: I walked past the car and didn’t stop to look as it was drawing too many flies.............it’s too interesting of a car to leave it the way it is, maybe just a canvas interior and quick fluff to drive and use as is? Time will tell....... Doubt given rust if there is enough wood structure to support any use focused on just mechanical. I had a discussion with a friend on weekend (actually he is in a photo looking at the car) and he mentioned that parts are near unobtainium (also said in his opinion a quality running/drivable/presentable parts car was likely needed to manage costs) matched to engines being delicate as to connecting ears on the sleeves and anyone not knowing what they are doing busting them with the slightest bit of "sticking" - exact words were carbon on sleeves tend to swell with any moisture and a novice will quickly do damage. Link to comment Share on other sites More sharing options...
alsancle Posted October 16, 2019 Author Share Posted October 16, 2019 36 minutes ago, John_Mereness said: Doubt given rust if there is enough wood structure to support any use focused on just mechanical. Agreed. Sadly I think the car is barn art. 1 Link to comment Share on other sites More sharing options...
alsancle Posted November 6, 2019 Author Share Posted November 6, 2019 Dragone's have it up on their website. Asking 36,500. https://dragoneclassic.com/currentofferings/1930-willys-knight-model-66b/ Link to comment Share on other sites More sharing options...
mercer09 Posted November 8, 2019 Share Posted November 8, 2019 agreed that is in tough shape. lots of lower metal work just to keep it alive and imagine needs all new wood that's for starters................ anyone will be upside down right off the bat. 1 Link to comment Share on other sites More sharing options...
alsancle Posted November 20, 2019 Author Share Posted November 20, 2019 There is an excellent article on the Willys Knight in the CCCA Magazine by Karl Zahm. It is from the Classic Car 1999 #2 and is available in digital form to Club members on the CCCA website. Link to comment Share on other sites More sharing options...
alsancle Posted November 20, 2019 Author Share Posted November 20, 2019 Link to comment Share on other sites More sharing options...
edinmass Posted November 20, 2019 Share Posted November 20, 2019 Just needs a tune up! That will buff out. 1 Link to comment Share on other sites More sharing options...
alsancle Posted February 23, 2020 Author Share Posted February 23, 2020 So many cool cars to go buy, so little time. For 23k this feels like quite the bargain. 1 Link to comment Share on other sites More sharing options...
edinmass Posted February 23, 2020 Share Posted February 23, 2020 I agree......a very cool car. 1 Link to comment Share on other sites More sharing options...
8E45E Posted February 24, 2020 Share Posted February 24, 2020 On 10/14/2019 at 10:58 AM, edinmass said: I walked past the car and didn’t stop to look as it was drawing too many flies.............it’s too interesting of a car to leave it the way it is, maybe just a canvas interior and quick fluff to drive and use as is? Time will tell....... A roll of vinyl wrap for the outside, and a snap-on canvas cover for the interior, ala 1960's British sports cars won't solve!! Craig Link to comment Share on other sites More sharing options...
alsancle Posted March 11, 2020 Author Share Posted March 11, 2020 Here is a picture of a 66B engine being rebuilt, courtesy of Al Giddings. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now