John348 Posted January 18, 2019 Share Posted January 18, 2019 My sons found me a old South Bend and I found if you contact them and give them the number from the table the will send you the information of who purchased it new and when. Mine was purchased in 1928 by someone in Brooklyn NY Link to comment Share on other sites More sharing options...
zipdang Posted April 1, 2019 Author Share Posted April 1, 2019 As I've been cleaning this lathe up, I found this "tool" in the drawer of parts. Any idea what it's supposed to hold or do? Is it homemade for something? It's been a great project to bring this lathe back to life - besides being a great indoor project. All the gears, screws, surfaces are in wonderful condition. All the oil and dirt protected them. I will soon post pictures of it done and then decide how to go about selling it. I'm sure there's someone who will get more use out of this than I would ever have. Link to comment Share on other sites More sharing options...
Restorer32 Posted April 1, 2019 Share Posted April 1, 2019 Almost every day we use a South Bend 9" only a couple years newer than yours. Some parts are still available from South Bend, or they were a few years ago. Link to comment Share on other sites More sharing options...
zipdang Posted April 1, 2019 Author Share Posted April 1, 2019 The only part I needed was one of the gibs. Hope I'm getting that term right. Found one with the screws on eBay and noticed that many of the parts for this lathe are available there also. The two descriptive/advertising booklets and the complete parts book that were in the drawer have been quite valuable to this novice. I was also able to download the 1935 edition of how to run a lathe from the South Bend company. Earlier, John348 suggested contacting the company for information based on my serial number. They responded that they do have that information back to 1929 although it may only be a line or two. They also wanted $25 for that line or two. Link to comment Share on other sites More sharing options...
zepher Posted April 2, 2019 Share Posted April 2, 2019 What a great find. And the price was right, too! A lathe is one of the tools I want to add to my garage at some point along with a plasma cutter. Please keep us updated on your progress as you clean it up. Link to comment Share on other sites More sharing options...
Bush Mechanic Posted April 2, 2019 Share Posted April 2, 2019 As to that home-made tool, my best guess is a 'spanner' to fit on the jaws of a chuck to unscrew it from the head-stock. I use a 1" square length of hardwood between the jaws, then spin the lathe rapidly by hand. When the wood strikes the bed, it unscrews the chuck. There is probably a 'correct' method, but that one works for me. And I can recommend a board to sit across the ways, under the chuck, for that occasion when the pesky thing slips out of your hands. I'd rather damage a board than the ways. 1 Link to comment Share on other sites More sharing options...
zipdang Posted April 2, 2019 Author Share Posted April 2, 2019 The belt I ordered came in today so I'm hoping to have it running in the next couple of days followed by some pictures. I think it looks so good it should be displayed on the dining room buffet, but my wife thinks otherwise.😉 1 Link to comment Share on other sites More sharing options...
Bhigdog Posted April 3, 2019 Share Posted April 3, 2019 (edited) I cant imagine anyone getting through life without a lathe. Well, for that matter without a Bridgeport and a DoAll and a drill press too.....bob Edited April 3, 2019 by Bhigdog (see edit history) Link to comment Share on other sites More sharing options...
Bush Mechanic Posted April 3, 2019 Share Posted April 3, 2019 Hey, Bob, what's a DoAll? And how have I got through life without one? Sorry Zipdang, we're wandering again. 1 Link to comment Share on other sites More sharing options...
Bhigdog Posted April 3, 2019 Share Posted April 3, 2019 DoAll is actually the name of a machine tool company. They,re best known for their line of band saws. Variable speed with an almost infinate variety of blades lets it cut almost any material from sponge rubber to steel as hard as a file. Hence the DoAll moniker.....bob 1 Link to comment Share on other sites More sharing options...
Mark Shaw Posted April 3, 2019 Share Posted April 3, 2019 (edited) My 13" SB lathe was built in 1921. Since this photo was taken, I have replaced the tailstock and installed a quick change tool holder. Edited April 3, 2019 by Mark Shaw (see edit history) Link to comment Share on other sites More sharing options...
Bhigdog Posted April 3, 2019 Share Posted April 3, 2019 (edited) And a 1950's era drill press from Sears...............Bob Edited April 3, 2019 by Bhigdog (see edit history) Link to comment Share on other sites More sharing options...
BuicksBuicks Posted April 3, 2019 Share Posted April 3, 2019 Lets not forget the low end Sears models, the Atlas lathes. I've been using this 1936 model for over forty years, even under the clutter Link to comment Share on other sites More sharing options...
Mark Shaw Posted April 3, 2019 Share Posted April 3, 2019 6 hours ago, Bhigdog said: And a 1950's era drill press from Sears...............Bob Yes, but we're talking South Bend lathes here... Link to comment Share on other sites More sharing options...
Bhigdog Posted April 3, 2019 Share Posted April 3, 2019 32 minutes ago, Mark Shaw said: Yes, but we're talking South Bend lathes here... Seems to me a widening discussion of vintage tooling and machines in our vintage AUTO shops, even though started by SB lathes, is a normal progression of subject that would be of interest to many if not most folks here and would certainly not detract from the subject of lathes in general or SB's in particular. .........Bob Link to comment Share on other sites More sharing options...
zipdang Posted April 4, 2019 Author Share Posted April 4, 2019 As long as the tangents that arise deal with the same subject, I'm all for it. As the one who started this thread, I've enjoyed learning about other aspects as well as picking up the tips on where to get more information. Thanks to all for contributing. My next task will be to get some idea of what this might be worth. Letting ebay bidders decide seems to be the easiest method since I'm not looking to get rich. Installed the belt today and with some fiddling to get everything lined up and tensioned, I was off to the races. Runs as good as it looks (in my biased opinion). Pictures soon - I promise. Link to comment Share on other sites More sharing options...
zipdang Posted April 4, 2019 Author Share Posted April 4, 2019 And some pictures (with my high class screen hiding mess in my shop). 1 Link to comment Share on other sites More sharing options...
Bush Mechanic Posted April 4, 2019 Share Posted April 4, 2019 Wow! that came up nicely. Well done, Sir. Link to comment Share on other sites More sharing options...
Laughing Coyote Posted April 4, 2019 Share Posted April 4, 2019 2 hours ago, Bush Mechanic said: Wow! that came up nicely. That's one nice looking lathe. You did a great job. I hope you're planning on keeping it. Link to comment Share on other sites More sharing options...
Ben Bruce aka First Born Posted April 4, 2019 Share Posted April 4, 2019 18 hours ago, BuicksBuicks said: Lets not forget the low end Sears models, the Atlas lathes. I've been using this 1936 model for over forty years, even under the clutter Makes me feel so good! Ben Link to comment Share on other sites More sharing options...
zipdang Posted April 4, 2019 Author Share Posted April 4, 2019 Thanks for all the replies! It was the perfect project to get me closer to warm weather and garage time. Realistically I don't see myself learning to use it, so I'm hoping when I'm done admiring it and have received some information from South Bend Lathe Co. I will find it a new home. Link to comment Share on other sites More sharing options...
zipdang Posted April 5, 2019 Author Share Posted April 5, 2019 I received the information from the South Bend Lathe Co. Here it is: Link to comment Share on other sites More sharing options...
John348 Posted April 5, 2019 Share Posted April 5, 2019 (edited) On 4/3/2019 at 6:43 PM, Mark Shaw said: Yes, but we're talking South Bend lathes here... Mark, I remember reading that South Bend made the Atlas Lathes that sears sold, sort of how the Kenmore Washers and Dryers were made by Whirlpool. Edited April 5, 2019 by John348 (see edit history) Link to comment Share on other sites More sharing options...
Mark Shaw Posted April 5, 2019 Share Posted April 5, 2019 9 hours ago, John348 said: Mark, I remember reading that South Bend made the Atlas Lathes that sears sold Nope. Atlas lathes were first manufactured by the Atlas Press Company in Kalamazoo, Michigan in 1932. In 1934, Atlas Press began selling its 10-inch lathes. For over 50 years, the company produced lathes of different sizes, as well as the Utility and Unit Plan model products. The Atlas Press Company was notable for using new materials in manufacturing; these included the trademarked ZAMAK alloy, which was composed of zinc, aluminum, magnesium and copper. The first lathes produced by the Atlas Press Company were 9-inch models branded as Craftsman "Metalmasters" or "Metalcraft." These were manufactured from 1932 to 1936, when they began competing with the company's simple 10-inch "Utility" lathes. Instead of a backgear, the first Atlas lathes utilized a V-belt system and a Hyatt roller-bearing countershaft unit. The patent for these lathes was granted in 1933. In 1936, the company began producing its Series 10D and 10F lathes, which were stronger and more effective than earlier models. The company designed these lathes with a modern backgear, which was a departure from the V-belt design. The 6-inch lathes also came into production in 1936 and were manufactured until 1974. This popular lathe sold well in the United States due to its affordability and all-purpose design. Atlas Press primarily offered these lathes through the Sears, Roebuck catalog. 1 Link to comment Share on other sites More sharing options...
John348 Posted April 5, 2019 Share Posted April 5, 2019 (edited) Hey Mark, Thanks a lot for the info and clearing that up for me . Great learning and reading, Edited April 5, 2019 by John348 (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now