wcbcdi Posted December 24, 2018 Share Posted December 24, 2018 Hi All I am a new member and apologize if I'm posting in the wrong spot. A few days ago I purchased some Model A Ford and vintage Dodge items that were in an old wood box. When I got home I discovered these items in the bottom of the box and have no idea what they are, what they are used for or even if they have anything to do with automobiles. Each measures approximately 9 x 6 inches and do not have a makers stamp. Any help identifying them would be much appreciated. Link to comment Share on other sites More sharing options...
Joe Block Posted December 24, 2018 Share Posted December 24, 2018 tire spreader perhaps? just a wild guess. Link to comment Share on other sites More sharing options...
Xander Wildeisen Posted December 24, 2018 Share Posted December 24, 2018 Early 1900's tooth extraction dental equipment. Link to comment Share on other sites More sharing options...
MikeC5 Posted December 24, 2018 Share Posted December 24, 2018 Adult toy? 1 Link to comment Share on other sites More sharing options...
joe_padavano Posted December 24, 2018 Share Posted December 24, 2018 36 minutes ago, Joe Block said: tire spreader perhaps? just a wild guess. That was my guess. Link to comment Share on other sites More sharing options...
Joe Block Posted December 24, 2018 Share Posted December 24, 2018 (edited) Joe_P nice collection of Wagons. My son looking for Wagon that like the mid 1950's greyhound bus Vista Cruiser, I think that one will the extra set of windows set in the roof line. Not sure of the year or post a picture. Found some Muscle vista cruiser link below. . https://autowise.com/strange-but-true-two-of-the-hottest-muscle-cars-were-station-wagons/ Edited December 24, 2018 by Joe Block (see edit history) Link to comment Share on other sites More sharing options...
Gunsmoke Posted December 24, 2018 Share Posted December 24, 2018 They are obvious;y a pair of adjustable clamps of some sort, perhaps part of a horse harness, not likely automotive. Appears some sort of part clipped onto the round nubs on end of each clamp. Link to comment Share on other sites More sharing options...
Spinneyhill Posted December 25, 2018 Share Posted December 25, 2018 What is stamped into them? Show us all the leathers laid out. How does that clamping bit work? is it captive inside the left hand leg as shown? And is that a spring behind it? Link to comment Share on other sites More sharing options...
wcbcdi Posted December 25, 2018 Author Share Posted December 25, 2018 Spinneyhill The short arm with teeth is imprinted with the number 6, is captive as shown and rests on a spring that puts pressure on the arm. One long arm is imprinted 5L and a D inside a box. The other arm is imprinted14R-L. The other clamp (?) has the same markings except instead of 5L it is imprinted 5R. Hope this helps. Link to comment Share on other sites More sharing options...
Xander Wildeisen Posted December 25, 2018 Share Posted December 25, 2018 If you put the tabs on the clamps/spreaders into to the holes on your belt after you eat to much food over the next few days. You can stretch your belt and still hold up your pants. 2 1 Link to comment Share on other sites More sharing options...
Bush Mechanic Posted December 25, 2018 Share Posted December 25, 2018 (edited) The clamps look similar to the set my father used when he was filing the teeth of horses. The idea was to keep the animal's mouth from closing. His had a metal bar across between them, from memory, but these may have used a pair of short leather straps with holes which clip onto the pegs at the ends of the 'jaws'. Of course, they could be something entirely different. It's a lot of years since I watched the old man work on a horse's mouth. So, Xander, you may have been closer to the mark than you realised, with 1900 dentistry. Edited December 25, 2018 by Bush Mechanic clarification (see edit history) Link to comment Share on other sites More sharing options...
mike6024 Posted December 25, 2018 Share Posted December 25, 2018 I had a dentist put a ratcheting device in my mouth to hold it open. To do a filling in a wisdom tooth, hard to get at unless the mouth was held very wide open. I heard it ratcheting when she installed it, tighter and tighter as it opened my mouth more. She broke a different tooth while using it, so there was an additional repair needed. So yes to hold a horses mouth open, I could see that being the case. Link to comment Share on other sites More sharing options...
wcbcdi Posted December 25, 2018 Author Share Posted December 25, 2018 BINGO! Went to eBay search and entered Horse Dental Equipment and there it was. It's a Mouth Gag. Thank You All for taking the time to respond to my question. Joe Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now