Curti Posted November 26, 2015 Share Posted November 26, 2015 This accident is a result of the V12 Auburn vibrating so violently that it caused the owner to loose control and veer into oncoming traffic and have a 18 wheeler drive over the the left rear. Fortunately, the driver was alone and he made it with only minor scrapes. Link to comment Share on other sites More sharing options...
capngrog Posted November 26, 2015 Share Posted November 26, 2015 While it's sad to see what had apparently been a beautiful car destroyed in a traffic crash, it's always good to find out that there were no serious injuries involved. Did this crash occur in Wisconsin? What was vibrating, and did it occur suddenly or had it been getting worse over time? Cheers,Grog Link to comment Share on other sites More sharing options...
padgett Posted November 26, 2015 Share Posted November 26, 2015 Cars are a lot like cats. If you listen they will warn you before they bite. Unless they don't. 1 Link to comment Share on other sites More sharing options...
46 woodie Posted November 26, 2015 Share Posted November 26, 2015 What was the cause of vibration. The car had to be driven before this accident. Did something break to cause the vibration issue? What a shame, looks like a beautiful car. Hope it was insured by a company that knows antique cars. Happy Thanksgiving to the driver with only minor scrapes, could have been much worse. Link to comment Share on other sites More sharing options...
Curti Posted November 26, 2015 Author Share Posted November 26, 2015 The accident occurred in Colorado. The driver did not have any physical problem, such as a seizure that would have caused the accident. All I know is the vehicle suddenly went into a violent wobble / shimmy , which we all know can be caused from any one or a number of front end problems. When accurate knowledge is gained, I will post it. I can't imagine there wouldn't be a post-mortum on the car to determine the malfunction. I would be very surprised if this car wasn't rebuilt. Link to comment Share on other sites More sharing options...
Guest AlCapone Posted November 26, 2015 Share Posted November 26, 2015 (edited) Is the cause ( vibration ) supposition or proven fact? Wayne Edited December 1, 2015 by AlCapone (see edit history) Link to comment Share on other sites More sharing options...
Curti Posted November 26, 2015 Author Share Posted November 26, 2015 Is the cause supposition or proven fact? Wayne The fact that the the driver had no medical impairment and the steering violently wobbled came from the mouth of the driver. Not from a court of law. Link to comment Share on other sites More sharing options...
padgett Posted November 26, 2015 Share Posted November 26, 2015 I've had speed wobble on a mororcycle before and is both sudden and violent. Only fast reactions to slow without braking can save. Many cars have steering dampers to avoid but if missing or failed... It usually occurs over 60 mph. *Think* vehicles with kingpins are more succeptible. Link to comment Share on other sites More sharing options...
keiser31 Posted November 26, 2015 Share Posted November 26, 2015 I've had speed wobble on a mororcycle before and is both sudden and violent. Only fast reactions to slow without braking can save. Many cars have steering dampers to avoid but if missing or failed... It usually occurs over 60 mph.*Think* vehicles with kingpins are more succeptible.With my 1931 DB coupe, the death wobble was caused by the angle of the front axle. There were too many shims on it and created the wrong angle to steer correctly. Link to comment Share on other sites More sharing options...
JACK M Posted November 27, 2015 Share Posted November 27, 2015 I had some wire wheels made that were recommended tubeless.The problem was that they used silicone to seal the spokes, a thick bead at that.I was running along at about 80 when a big chunk of the silicon broke from the rim and went up against the back of the tread side of the tire throwing the balance WAY out.It was a violent ride for a few seconds,It happened twice before the manufacturer agreed to do something about it. I shipped them the wheels and they didn't do a thing. The liars sent them back saying that they had redone the silicone system and all should be good. They lied and they know good and well that I am very effective advertising for them, just not the right kind.I put tubes in the tires and no problems since. Link to comment Share on other sites More sharing options...
Robert G. Smits Posted November 27, 2015 Share Posted November 27, 2015 Anyone who has driven a Dodge 4wd pick up through the "Death Wobble" experience can relate to this. The vehicle is uncontrollable for many seconds. Bob Smits Link to comment Share on other sites More sharing options...
Curti Posted November 27, 2015 Author Share Posted November 27, 2015 Currently, the prevailing thought is, one of the front knockoff hubs came loose. The hubs are LH thread on the right and vice-versa. This is unsubstantiated and purely conjecture. Jack, and the wheel manufacturer is ? PM please. Link to comment Share on other sites More sharing options...
keiser31 Posted November 27, 2015 Share Posted November 27, 2015 Currently, the prevailing thought is, one of the front knockoff hubs came loose. The hubs are LH thread on the right and vice-versa. This is unsubstantiated and purely conjecture. Jack, and the wheel manufacturer is ? PM please.Left hand knockoff will unscrew itself when mounted on the right. Ask me how I know.... 1 Link to comment Share on other sites More sharing options...
Guest Posted November 27, 2015 Share Posted November 27, 2015 I would rebuild that car. Link to comment Share on other sites More sharing options...
trimacar Posted November 27, 2015 Share Posted November 27, 2015 I would agree that it's worth rebuilding, but it would be a long and expensive road. It appears the frame was bent, and that skews everything, not even considering the new wood and metal needed. Hopefully the owner had good insurance, and having that, would just turn it over to a restoration shop and say "send the insurance company the bill"...and it will be in the six figures.... Link to comment Share on other sites More sharing options...
Restorer32 Posted November 28, 2015 Share Posted November 28, 2015 Close to 6 figures at least. Link to comment Share on other sites More sharing options...
JACK M Posted November 28, 2015 Share Posted November 28, 2015 Currently, the prevailing thought is, one of the front knockoff hubs came loose. The hubs are LH thread on the right and vice-versa. This is unsubstantiated and purely conjecture. Jack, and the wheel manufacturer is ? PM please. PM sent.Tru story Link to comment Share on other sites More sharing options...
auburnseeker Posted November 29, 2015 Share Posted November 29, 2015 Considering what these sell for I can't imagine it not being rebuilt by someone. Very sad pictures to see. Let us know what they find as the culprit. Especially since this is the same exact type of Auburn (although probably an 8) that I'm hoping to end up with. Link to comment Share on other sites More sharing options...
Curti Posted November 29, 2015 Author Share Posted November 29, 2015 Randy, you may want to consider this car if it becomes available. If you are, let me know. Link to comment Share on other sites More sharing options...
auburnseeker Posted November 30, 2015 Share Posted November 30, 2015 The timing is probably not right but keep me posted. Life changes and you never know what state you will be in when opportunities become available. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now