BadGoat Posted September 16 Share Posted September 16 (edited) So, I am officially convinced my wife is correct when she says that I cannot control my automotive urges and "just say no". I went to go look at a John Deere tractor listed on CL at an estate pre-sale last weekend, and they also had cars. mostly fords and an old jeep, however there was this 1937 Hudson Terraplane (business??) coupe that needs some assembly required. Needless to say, that is looked beautiful just sitting on jack stands as it was. however, I was not interested in the asking price. When the gentleman said "make an offer" I did..... and he held out his hand and said done. I did not get the tractor... I will be looking for some parts that were not there in multiple areas of the garage where it has sat for nearly 12 years just as it was when I saw it.... So, the assembly to start and then disassembly to clean up suspension and frame, unfortunately the motor and transmission are long gone as they had placed a 302 with automatic in its place. found the suspension on the side of the shop covered by a trap and 10" of leaves and dirt... taking inventory of parts. 5 hours later....... Edited Monday at 05:59 PM by BadGoat update (see edit history) 18 Link to comment Share on other sites More sharing options...
TerryB Posted September 16 Share Posted September 16 Looks like fun! 2 Link to comment Share on other sites More sharing options...
Tate Posted September 17 Share Posted September 17 Nice car! Also did you get a photo of the old jeep? Link to comment Share on other sites More sharing options...
BadGoat Posted September 17 Author Share Posted September 17 (edited) I did not, however I will be back up there to get the rest of the items that I could not fit on the trailer. it is in very rough shape. it is a 56 CJ with rusted floors. update, here is the CL posting.... https://portland.craigslist.org/wsc/pts/d/banks-automotive-estate-sale/7778264678.html Edited September 17 by BadGoat (see edit history) Link to comment Share on other sites More sharing options...
Tate Posted September 17 Share Posted September 17 Thanks for the response, sadly the jeep isn't old enough for me haha. Link to comment Share on other sites More sharing options...
Luv2Wrench Posted September 19 Share Posted September 19 The only problem I see with this, and it is a glaring problem in IMHO.... you didn't get the tractor. 1 1 Link to comment Share on other sites More sharing options...
BadGoat Posted September 23 Author Share Posted September 23 Inventory completed..... Surprisingly I have after great many hours searching the dark corners of the shop have found the majority of the parts. As I am not familiar with the 1937 Hudson Terraplane until now, I am not sure how much luck I will have finding the remaining items. So, if anyone has and leads or parts I would appreciate any help. I am also wondering if it will near be impossible to return the car to completely stock as the original engine, transmission and rear end have been replaced with small block ford using the original motor mounts (that came with the car). There have been very little modifications to the frame that can be fixed back to original 'Ish. Also, I am not sure of the actual model of this vehicle as it has a large package tray, so would that be a "utility" or a Victoria coupe as it has the fender badges and lots of chrome with all 3 front & rear bumperettes? serial #735604 pieces missing: heater core cover (vents) clock on dash (or cover for hole) headlamp inners or rings (not sure how they go together) hood ornament jewel (have base however wing has been broken off. maybe 3D print one?) fuel tank as the two that came with it are rusted badly. leaf spring shackles front and rear. door rocker trim moldings. gas cap and filler gasket & mounting ring. RT front bumper bracket (might just make one) I have all the interior wood rails and side frames with all the old interior panels to use as patterns for new trim as well as the seat frame and springs. I added some photos of the RT/LT tail lamps to see if these are original or from another vehicle? all the glass with gasket, can these gaskets be rejuvenated with anything or is there anyone that reproduces them? The wife has fallen in "LIKE" with this one and wants me to move it in front of the other projects so we can drive it. I appreciate thoughts and advise on this car as I am wanting to bring it back to what it was as the modifications did not harm the car, however a part of me likes the hot rod looks of it. 6 Link to comment Share on other sites More sharing options...
Luv2Wrench Posted September 23 Share Posted September 23 I'd be real tempted to do minimal work other than mechanical needed for the car to be safe and enjoyable. I think once in that state you'll "just know" what is right for the car. Obviously it needs to be safe and dependable. Cosmetically it looks really cool as is. 4 Link to comment Share on other sites More sharing options...
BadGoat Posted September 23 Author Share Posted September 23 thank you, Sir That is kind of what I am thinking after putting parts together this weekend. It has modern power brakes added with 4-wheel disks, 9" rear end and the 302 with automatic looks like it was rebuilt (or craigslist rebuild with new gaskets). and done right with quiet exhaust I don't think anyone would notice unless they opened the hood. Link to comment Share on other sites More sharing options...
zipdang Posted September 24 Share Posted September 24 Don't hotrod it. There I said it. No preaching.😐 5 Link to comment Share on other sites More sharing options...
wayne sheldon Posted September 24 Share Posted September 24 7 hours ago, zipdang said: Don't hotrod it. There I said it. No preaching.😐 I agree! I really hope you can return it to the once great car it was and should be again. That said. you have to do what is best for you. Most of the pieces you mention needing fall into the category of "do the best as you can" fabrication. So few Terraplanes exist in a nicely restored state, that this could be a really special car if done right. Quite a few really rough Terraplanes have been shared lately in the not mine for sale section. Most of them have practically no chance of being restored. But this one looks really doable. 3 Link to comment Share on other sites More sharing options...
BadGoat Posted September 24 Author Share Posted September 24 I am in agreement with your thoughts as I have appreciated the originality of my vehicles. So, on goes the hunt for a viable power train that will not break the bank. I am going to utilize the existing set up to drive it and enjoy it until I can find a suitable engine and transmission. (One rule of the garage.... cars must move on their own power.) also, I have a task of the interior and digging out my sewing machine to make the panels, seat cover and headliner. I found a roll of fabric that was with the interior parts that appears to be close to what was original, and it was tagged "37 Hudson". any assistance in locating items is greatly appreciated. 4 Link to comment Share on other sites More sharing options...
Mike "Hubbie" Stearns Posted September 24 Share Posted September 24 I like it no matter what power train you use. Looks to be a fun project. Mike 4 Link to comment Share on other sites More sharing options...
BadGoat Posted Monday at 06:10 PM Author Share Posted Monday at 06:10 PM Assistance needed: I have been trying to figure out the headlamp buckets and how the lamps are mounted in them? I have what appear to be original glass lenses, however only aftermarket reflector inserts and small outer rings that do not fit. does anyone know what is missing? also looking for a fuel tank or if there is anyone that restores existing tanks? 5 Link to comment Share on other sites More sharing options...
TexRiv_63 Posted Monday at 06:20 PM Share Posted Monday at 06:20 PM Very cool project, I'm subscribed. Link to comment Share on other sites More sharing options...
BadGoat Posted Thursday at 05:22 PM Author Share Posted Thursday at 05:22 PM Question for those with much more knowledge than I.... on the Hudson they have a "horseshoe" leaf spring shackle that I have not been able to locate in my search of the old Interweb. I have someone at Rareparts.com looking, however even he is having difficulty finding them as he is saying they are designed for front RT/LT and rear RT/LT parts. my question, would it be plausible to just utilize a more modern flat bracket shackle for these in place of? I had to make temporary shackles to hold the suspension to move the car out of the shop as there were only 2 of the 6 needed and I spent the better part of a Saturday rummaging through the shop to find the originals with no luck. Thoughts?? 1 Link to comment Share on other sites More sharing options...
BlueDevil Posted Thursday at 05:38 PM Share Posted Thursday at 05:38 PM You might be able to use something like this. These are off trailers. 2 Link to comment Share on other sites More sharing options...
BlueDevil Posted Thursday at 08:52 PM Share Posted Thursday at 08:52 PM May be available at Tractor Supply or Northern Tool 1 Link to comment Share on other sites More sharing options...
BadGoat Posted Friday at 05:39 PM Author Share Posted Friday at 05:39 PM I stopped in at Oregon Auto Springs (only 5 miles from me) and they will recondition the springs with new hardware & cushions with the shackles for $100 per spring. and if I wanted flat stock shackles it is $75 per. win-win as I don't have to blast and paint the springs or the brackets. I will add photos after they are completed. 6 Link to comment Share on other sites More sharing options...
36 D2 Coupe Posted Friday at 08:15 PM Share Posted Friday at 08:15 PM (edited) Hi Bad Goat Here's a look at a headlight pot from my '36 Dodge. I think it is very much like yours. Diameter of the opening is 7 9/16 " What you appear to be missing is the stainless trim ring and the mounting tabs that support the reflector. Looking at your reflector, it has the same springs on the back as mine and they anchor in the square holes in the two tabs you see in the first photo. The two short tabs keep the lens in place. The lens is held in by the pressure exerted by the springs on the reflector and the reflector is anchored by a bracket and screw that goes through the hole seen on the top (which is actually the bottom of the pot - it is sitting upside down) The headlight lens is tilted and popped into place. Someone had converted mine to a sealed beam unit and cut out one of the tabs on one headlight pot. If your lens is a RITEWAY lens measuring 7 9/16 wide x 7 3/4" tall (so that they will slip into the headlight pot) then we have very similar headlights. I do have extra reflectors if you need them and maybe a source of the tabs. Good luck. Jim Edited Friday at 08:18 PM by 36 D2 Coupe added info (see edit history) 1 Link to comment Share on other sites More sharing options...
BadGoat Posted Friday at 08:59 PM Author Share Posted Friday at 08:59 PM thank you, Jim it does look the same or very similar. I am not sure why they would have removed the bucket tabs and then paint them??? I would have to figure a way to add the tabs back in without effecting the paint on the outside. I might experiment with some modern panel bonding or just use the old faithful JB weld. I will take you up on the source for the tabs. Link to comment Share on other sites More sharing options...
36 D2 Coupe Posted Friday at 09:00 PM Share Posted Friday at 09:00 PM Taking a second look at your box of headlight parts, you may indeed have the original trim rings - they are just very difficult to put back on once removed. And the reflector looks original too. Happy to help you if I can. I know of a wrecking yard in Canada that might have an original power train in the yard but it would need a LOT of work and the shipping would be pricey. Contact French Lake Auto Parts in Annandale MN (sales@frenchlakeautoparts.com) to see what they may have. JIm 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now