AURktman Posted January 24, 2021 Share Posted January 24, 2021 I ran across this drive system while looking at a billion other things and I have become quite intrigued. I know its not really practical and not really the best way of designing a drive system, but that's why it grabs my attention (I must have been Rube Goldberg in my previous life). Anyone have direct knowledge (owner / driver / saw once at a car show) of this system? I found a book on Amazon about it, but it won't be here until Feb 3-8 and I love hearing first person information. https://poeschloncars.blogspot.com/2017/01/chain-drive-frazer-nash-not-your.html Link to comment Share on other sites More sharing options...
edinmass Posted January 24, 2021 Share Posted January 24, 2021 Leno has one, and he did several videos of it.........check it out. 1 Link to comment Share on other sites More sharing options...
AURktman Posted January 24, 2021 Author Share Posted January 24, 2021 I keep forgetting about Leno, he has probably had one of every type. Ha! Thanks for the heads up! Link to comment Share on other sites More sharing options...
AURktman Posted January 24, 2021 Author Share Posted January 24, 2021 I just realized I’ve seen part of that video when looking for Jay Leno doing additive manufacturing to make parts, I didn’t realize then it was for the Frazier Nash. Maybe that’s why I was drawn to it subconsciously as I had already seen it working. Just imagine, if my memory is that bad now at 47, I’m going to be able to plan my own surprise birthday parties when I hit 60 because I will forget all about the planning. Link to comment Share on other sites More sharing options...
Rusty_OToole Posted January 24, 2021 Share Posted January 24, 2021 Frazer Nash started out building cyclecars, small cars with a motorcycle engine like an early Morgan. The chain drive lashup was a cheap light duty way to make a transmission. Later they made larger (but still small) sports cars with 4 cylinder and a few six cylinder engines but kept the chain drive lashup probably because it was cheap and they had it. Don't know any advantage other than cost, and that you could change gear ratios by swapping sprockets. One disadvantage was no rear differential which meant skidding the tires around corners. Not much of a problem on the first very light low powered cyclecars but something you had to be wary of in the later models. 1 Link to comment Share on other sites More sharing options...
ojh Posted January 24, 2021 Share Posted January 24, 2021 I know of a Frazer-Nash, a tight little sports car, looks like its from the 70's? One of them? Link to comment Share on other sites More sharing options...
Rusty_OToole Posted January 24, 2021 Share Posted January 24, 2021 Last Frazer Nash built 1957. They began assembling BMW sports cars in 1934 and selling them as Frazer Nash BMWs. Last chain drive Frazer Nash 1947. From 1948 to 1957 they made only the FNBMW. And they only made 85 of them in 10 years. They were using BMW engines built under license by Bristol, when they stopped making the engines FN stopped making cars and became the English distributor and importer of Porsche cars. Link to comment Share on other sites More sharing options...
AURktman Posted February 7, 2021 Author Share Posted February 7, 2021 I received the book from the UK and it’s really good! Quite informative and has interesting diagrams. Link to comment Share on other sites More sharing options...
broker-len Posted February 21, 2021 Share Posted February 21, 2021 I think Jay Leno has one of these he did a piece on it several years ago maybe you can find on his sight Link to comment Share on other sites More sharing options...
AURktman Posted February 22, 2021 Author Share Posted February 22, 2021 Yep, it’s a good video! https://youtu.be/CySWcjlxO4Y Link to comment Share on other sites More sharing options...
nickelroadster Posted February 22, 2021 Share Posted February 22, 2021 Frazer Nashes did pretty well racing. Link to comment Share on other sites More sharing options...
nzcarnerd Posted February 22, 2021 Share Posted February 22, 2021 The chain drive set up dates back to the GN era - N being for Archie Frazer-Nash - GN (car) - Wikipedia 1 Link to comment Share on other sites More sharing options...
Ulster Posted December 6, 2022 Share Posted December 6, 2022 (edited) I see that this an older post but I thought I should chime in. While the original GN used the chain drive system, likely because it was low cost and lightweight, therefore befitting a cycle car, the Frazer Nash continued with it because of the advantages it offered. First off, Frazer Nash cars were not inexpensive as were the GN's built by Frazer-Nash and Godfrey. A conventional g/b and differential rob power from the engine. As much as 25% or more depending on the efficiency of the systems employed. Secondly, the system used dog clutches to change speeds(gears). This is a robust system that eliminates trying to mesh gears, either by using synchronizers, or double clutching. Modern racing cars sometimes use a similar system. Gear changes are simple...unload the drive and quickly shift to the next gear. No use of the clutch is necessary. Thirdly, the system is very lightweight. The rear axle is hollow, as is the driven cross shaft. The bevel box is very small and light. Fourth, the system allows for easy changes of ratios to suit the requirements of a particular track or hillclimb. The sprockets are split and changing is accomplished by removing the sprocket, installing one with a couple more, or couple less teeth, and the ratio is changed. Chains can be adjusted then by using cranked links or removing a link or two. Main adjustment of all chains is by sliding the rear axle either forward or backward, much like a motorcycle. Finally, the system acts much like a locked differential. Cornering hard means you don't want to slow down on the corners, but maintain speed and let the rear of the car slide a bit. The system saw prewar 'Nashes competing well with more modern cars through the forties and fifties. I'll also note to Rusty_Otoole above that the last chain drive Frazer Nash was built pre war in 1939. Post war, Frazer Nash produced, not FN badged BMWs. What "Aldy" HR Aldington did was to gain the rights to the BMW six cylinder 2 liter engine as part of war reparations. In a good business maneuver, he sold the rights to this engine to Bristol who had the facilities to build this engine. He then required that he could acquire these engines at cost to power the post war cars. There were, post war several models, but the most noted was the Frazer Nash Le Mans Replicas which came in Mark I and Mark 2 forms. They were successfully raced through the forties and fifties by such drivers as Stirling Moss. Lest I sound like an armchair commenter, I am the owner of PH7962, a 1928 Frazer Nash Boulogne. The car has a well documented history including the 1929 Double Twelve at Brooklands, various trials and hillclimbs and track events. Edited December 7, 2022 by Ulster typo (see edit history) 2 Link to comment Share on other sites More sharing options...
1937hd45 Posted December 6, 2022 Share Posted December 6, 2022 Ken Purdy had one with a Blackburn engine. Last I knew someone Ohio was the caretaker of it, neat car, I remember him sliding it into the shop with the brakes locked up. Link to comment Share on other sites More sharing options...
Ulster Posted December 7, 2022 Share Posted December 7, 2022 All, you might be interested in this video of a match race between an Austin Healey and a Frazer Nash. Obviously no long straights, but it gives an idea of how well they perform. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now