-morten- Posted October 31, 2017 Share Posted October 31, 2017 Hi everybody, just bought my first Buick. It is a runner, but it will be given some love during this winter. I will fill you in with all the ups and downs. 2 Link to comment Share on other sites More sharing options...
-morten- Posted October 31, 2017 Author Share Posted October 31, 2017 2 Link to comment Share on other sites More sharing options...
Taylormade Posted November 1, 2017 Share Posted November 1, 2017 Very nice. Link to comment Share on other sites More sharing options...
-morten- Posted November 1, 2017 Author Share Posted November 1, 2017 Link to comment Share on other sites More sharing options...
neil morse Posted November 1, 2017 Share Posted November 1, 2017 (edited) Your car looks great! I can see why you would think it was a Special because of the nameplate on the dash where the radio would be, and the name on the hood latches. That's odd. Must be something to do with cars that Buick made for import. Edited November 1, 2017 by neil morse (see edit history) Link to comment Share on other sites More sharing options...
dracenroc Posted November 1, 2017 Share Posted November 1, 2017 Pretty cool! Congrats! Enjoy and take good care of her! Link to comment Share on other sites More sharing options...
-morten- Posted November 1, 2017 Author Share Posted November 1, 2017 5 hours ago, neil morse said: Your car looks great! I can see why you would think it was a Special because of the nameplate on the dash where the radio would be, and the name on the hood latches. That's odd. Must be something to do with cars that Buick made for import. yes, and the registrations papers also say special coupe series 40. was only imported 2 years ago, so probably a "take what you find" restauration. Link to comment Share on other sites More sharing options...
-morten- Posted November 1, 2017 Author Share Posted November 1, 2017 Link to comment Share on other sites More sharing options...
Buicknutty Posted November 2, 2017 Share Posted November 2, 2017 Nice car! Lots of times there's a typo on the registration, which gets transposed time after time. I have had that happen as well by our motor vehicle dept. Thanks for sharing it. Keith Link to comment Share on other sites More sharing options...
neil morse Posted November 2, 2017 Share Posted November 2, 2017 (edited) But what do people make of the fact that the car says "Special" both on the radio delete and the hood latches? I was theorizing that it might have been some unique "rebadged" Super that Buick made for export, but Morten (if I'm understanding him correctly) says that the car was only imported to Norway two years ago. Seems like a mystery to me. Edited November 2, 2017 by neil morse (see edit history) Link to comment Share on other sites More sharing options...
-morten- Posted November 2, 2017 Author Share Posted November 2, 2017 (edited) i think that we all now agree that it is a super sport coupe 56s, but what about the engine? papers says its a 248cid, but google says 320 cui? Edited November 2, 2017 by -morten- (see edit history) Link to comment Share on other sites More sharing options...
-morten- Posted November 2, 2017 Author Share Posted November 2, 2017 1 hour ago, neil morse said: but Morten (if I'm understanding him correctly) you understand him correctly. Link to comment Share on other sites More sharing options...
neil morse Posted November 2, 2017 Share Posted November 2, 2017 9 minutes ago, -morten- said: i think that we all now agree that it is a super sport coupe 56s, but what about the engine? papers says its a 248cid, but google says 320 cui? 248 is correct for the Super. The Century and the Roadmaster had the 320. (And I was pretty sure that I understood you correctly, but thanks for the follow up.) Link to comment Share on other sites More sharing options...
-morten- Posted November 2, 2017 Author Share Posted November 2, 2017 6 minutes ago, neil morse said: 248 is correct for the Super. i am sure you are right, but this says 320 cid: http://classiccardatabase.com/specs.php?series=386&year=1940&model=2576 Link to comment Share on other sites More sharing options...
neil morse Posted November 2, 2017 Share Posted November 2, 2017 1 hour ago, -morten- said: i am sure you are right, but this says 320 cid: http://classiccardatabase.com/specs.php?series=386&year=1940&model=2576 Don't believe everything you read on the internet. They are wrong. Here's a link to someone who has the correct information: http://www.carnut.com/specs/gen/buick40.html Link to comment Share on other sites More sharing options...
Ben Bruce aka First Born Posted November 2, 2017 Share Posted November 2, 2017 (edited) neil is correct. There is the probability your beautiful coupe has had incorrect parts installed at some dim distance past time. A 320 is about 6 0r 7 inches longer than the 248. How about a picture or two of the engine, driver [ manifold] side down low. Ben Edited November 2, 2017 by Ben Bruce aka First Born (see edit history) Link to comment Share on other sites More sharing options...
-morten- Posted November 3, 2017 Author Share Posted November 3, 2017 (edited) A gentle start by tideing up the booth. Edited November 3, 2017 by -morten- (see edit history) Link to comment Share on other sites More sharing options...
-morten- Posted November 3, 2017 Author Share Posted November 3, 2017 The number on intake manifold is 1330905-2. Link to comment Share on other sites More sharing options...
Ben Bruce aka First Born Posted November 3, 2017 Share Posted November 3, 2017 Looks like a 248. Ben Link to comment Share on other sites More sharing options...
Thriller Posted November 3, 2017 Share Posted November 3, 2017 I don't remember for certainty the paint code, but your car has a similar (if not the same) paint scheme as my 1941 Special. If I recall, the paint code on mine is a 1940 code, not a 1941 code. You have a nice nice looking car. Enjoy! Link to comment Share on other sites More sharing options...
Guest Posted November 3, 2017 Share Posted November 3, 2017 Congrats on finding a very fine looking sport cpe.(frs) Buick for full rear seat, as opposed to a business cpe(no rear seat). Those 1941 rocker panel mouldings actually look very nice as well. I'm prejudice, I have one also. Please feel fee to inquire if I can answer 1940 Super ?s. Makes me feel a little better just looking at the photos of that beauty! Link to comment Share on other sites More sharing options...
BuickBob49 Posted November 4, 2017 Share Posted November 4, 2017 Great car! One of my favorite models. Are we sure that the data plate is original to this car? The photo shows it attached with screws instead of rivets. Also, could someone remind us about the significance of the "K" stamped on the top right of the plate? Am I correct in recalling that it meant the car was equipped with side mounts? What is the frame number? What is the engine number? Link to comment Share on other sites More sharing options...
-morten- Posted November 4, 2017 Author Share Posted November 4, 2017 11 hours ago, Thriller said: I don't remember for certainty the paint code, but your car has a similar (if not the same) paint scheme as my 1941 Special. If I recall, the paint code on mine is a 1940 code, not a 1941 code. hi, thanks for feedback, if you could find the paintcode, or tell me where i can find it on my car i would be grateful. take care. -morten- Link to comment Share on other sites More sharing options...
-morten- Posted November 4, 2017 Author Share Posted November 4, 2017 10 hours ago, 2carb40 said: Those 1941 rocker panel mouldings actually look very nice as well. I'm prejudice, I have one also. Please feel fee to inquire if I can answer 1940 Super ?s. hi, thanks for your feedback. didn't know moldings where '41, good to know. i will take you up on the info part. can start with an engine bay related. From the air intake on the firewall there is a big air-hose, where does it end? should there be a bracket of some sort in the front end? Link to comment Share on other sites More sharing options...
-morten- Posted November 4, 2017 Author Share Posted November 4, 2017 8 hours ago, BuickBob49 said: Are we sure that the data plate is original to this car? The photo shows it attached with screws instead of rivets. Also, could someone remind us about the significance of the "K" stamped on the top right of the plate? Am I correct in recalling that it meant the car was equipped with side mounts? What is the frame number? What is the engine number? Thanks for feedback. The plate is the only one i have :-) so i'll hold on to that as the original. would also like to know more about the "K". Engine number is blank (exchange engine?). Frame number is 13795947. Link to comment Share on other sites More sharing options...
Thriller Posted November 4, 2017 Share Posted November 4, 2017 (edited) On 2017-11-01 at 3:21 PM, -morten- said: The paint code is 552 (lower right corner). According to http://www.autocolorlibrary.com/aclchip.aspx?image=1940-Buick-pg01.jpg it should be a two tone green. Paint code 551 is the grey upper and blue lower. If that link doesn't work properly search autocolorlibrary.com and you can choose year and make to get the paint charts. It's s a very nice car. Edited November 4, 2017 by Thriller Corrected typo (see edit history) Link to comment Share on other sites More sharing options...
Guest Posted November 4, 2017 Share Posted November 4, 2017 (edited) On 11/4/2017 at 4:29 AM, -morten- said: Thanks for feedback. The plate is the only one i have :-) so i'll hold on to that as the original. would also like to know more about the "K". Engine number is blank (exchange engine?). Frame number is 13795947. I think I read in another posting that the big K stands for optional heat/defroster package? The large hose in the engine compartment is outside air supply attached to core support, next to radiator. Tags originally riveted on untill about '48 or '49? then with screws. Your chassis vin # should be on an aluminum strip attached with what looks like rivets on the top of the frame rail pass side next to body cowl to frame brace, but can be tapped out like a nail from underneath as they have spiral flutes on the shaft that create a light press fit when tapped in at assembly time. Engine # not matching with chassis vin this vintage, however some states used eng #stamped on pad as legal registration #. So if your concerned about how numbers corolate with paper registration, that aspect can cause confusion. When changed in that scenario, the numbers were supposed to be transferred if new Buick eng with blank stamp pad. Used replacement eng, already stamped, how many stampings got transferred? Eng number should end with 5? (Dang memory),which stands for Super which is a 50 Series Buick(56s), 2dr cpe. Confused yet? Your tag on the cowl should have yet another number after Mod 56, this is the number in the Buick factory parts books to look up parts for your car exactly, as other styles, 4dr (51) etc. Supers are also 50 series, but not 56s, 2 Dr cnvrts 56c. 51c= 4dr Cnvrt. The quiz is Fri. But not this Fri. Lol! Edited November 5, 2017 by Guest (see edit history) Link to comment Share on other sites More sharing options...
-morten- Posted November 5, 2017 Author Share Posted November 5, 2017 Hi, how do i adjust this? The edge of door touches the edge of fender about 4/5 of the way inn. I thought i could just loosen the upper hinge and put some spacers behind, but it did not do the trick. Link to comment Share on other sites More sharing options...
-morten- Posted November 5, 2017 Author Share Posted November 5, 2017 Found out a way to fix it, most likely the way they did it back in the day. I put a small piece of wood between door and fender and carefully closed the door. Something moved, and now a have big enought gap so paint wont chip of. Link to comment Share on other sites More sharing options...
-morten- Posted November 5, 2017 Author Share Posted November 5, 2017 Beerbreak, view from chair. 1 Link to comment Share on other sites More sharing options...
-morten- Posted November 11, 2017 Author Share Posted November 11, 2017 On 4.11.2017 at 1:55 AM, BuickBob49 said: Are we sure that the data plate is original to this car? The photo shows it attached with screws instead of rivets. Riveted :-) Link to comment Share on other sites More sharing options...
Buicknutty Posted November 13, 2017 Share Posted November 13, 2017 On 11/5/2017 at 9:39 AM, -morten- said: Found out a way to fix it, most likely the way they did it back in the day. I put a small piece of wood between door and fender and carefully closed the door. Something moved, and now a have big enought gap so paint wont chip of. I have a body manual for my '41 Buick and some of the techniques they describe are similar to this. Seems quite brutal by today's standards. Keith Link to comment Share on other sites More sharing options...
Morgan Wright Posted November 17, 2017 Share Posted November 17, 2017 The speedometer in your pic is the one for the 1941-1947 model years, it goes up to 120 MPH. The 1940 speedometer looks exactly the same and fits, but it only goes to 110 and says BRIGHT LIGHTS on it. Yours has been replaced it seems. Link to comment Share on other sites More sharing options...
-morten- Posted November 18, 2017 Author Share Posted November 18, 2017 (edited) On 04.11.2017 at 10:50 PM, 2carb40 said: I think I read in another posting that the big K stands for optional heat/defroster package? The large hose in the engine compartment is outside air supply attached to core support, next to radiator. Tags originally riveted on untill about '48 or '49? then with screws. Your chassis vin # should be on an aluminum strip attached with what looks like rivets on the top of the frame rail pass side next to body cowl to frame brace, but can be tapped out like a nail from underneath as they have spiral flutes on the shaft that create a light press fit when tapped in at assembly time. Your tag on the cowl should have yet another number after Mod 56. Thanks, that all ads ups. i have a defroster and a heater under front seat. Edited November 18, 2017 by -morten- (see edit history) Link to comment Share on other sites More sharing options...
-morten- Posted November 18, 2017 Author Share Posted November 18, 2017 On 13.11.2017 at 4:42 AM, Buicknutty said: I have a body manual for my '41 Buick and some of the techniques they describe are similar to this. Seems quite brutal by today's standards. Keith we have all become a lot of pussies, bring back the cavemen :-) smal problem smal hammer, big problem big hammer. 3 1 Link to comment Share on other sites More sharing options...
-morten- Posted November 18, 2017 Author Share Posted November 18, 2017 (edited) On 17.11.2017 at 3:31 AM, Morgan Wright said: The speedometer in your pic is the one for the 1941-1947 model years, it goes up to 120 MPH. The 1940 speedometer looks exactly the same and fits, but it only goes to 110 and says BRIGHT LIGHTS on it. Yours has been replaced it seems. thanks for the info. i have found some 39 and 41 parts, was not aware of speedo thow. Some parts will be exhanged and some i can live with. if i cant find the correct speedo i'll just fiddle with the engine a bit so i need the extra 10 MPH :-) Edited November 18, 2017 by -morten- typo (see edit history) 1 Link to comment Share on other sites More sharing options...
-morten- Posted November 18, 2017 Author Share Posted November 18, 2017 New repro lenses as the old ones where quite white, and some new and re-possisioned mirrors so that i actually can use them. 2 Link to comment Share on other sites More sharing options...
-morten- Posted November 24, 2017 Author Share Posted November 24, 2017 Converted the dash clock to battery driven. And yes, the original clock was rusty beond repair. Link to comment Share on other sites More sharing options...
-morten- Posted December 1, 2017 Author Share Posted December 1, 2017 A little bit of tidying up, removed broken fuel pump, relocated electric pump, removed some pipelines, fasterner for battery, k@n airfilter. 1 Link to comment Share on other sites More sharing options...
-morten- Posted December 2, 2017 Author Share Posted December 2, 2017 Super. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now