Steve Braverman Posted September 7, 2008 Share Posted September 7, 2008 I need to make a new float for the gas tank sender on my dad's 1923 Franklin. Any ideas for local sources of cork? How about a synthetic replacement? Link to comment Share on other sites More sharing options...
oldiron Posted September 7, 2008 Share Posted September 7, 2008 Steve; google for "cork" or cork suppliers. There you will find a couple of mailorder suppliers with cork stock ranging in thickness from 1/8 inch, up to three or four inches in thickness. Some of the cork material listed by these suppliers is also in block form such as 2x3x5. Good luck; regards; jerry janson Link to comment Share on other sites More sharing options...
nearchoclatetown Posted September 7, 2008 Share Posted September 7, 2008 McMaster-Carr, your one stop shopping center for old car restoration. Link to comment Share on other sites More sharing options...
HarryJ Posted September 8, 2008 Share Posted September 8, 2008 Steve , What size do you need? I have plenty of cork left over from my recent purchase. I will be glad to cut you off some. Link to comment Share on other sites More sharing options...
Chuck Richardson Posted September 9, 2008 Share Posted September 9, 2008 Steve,Harold Sharon suggested using wine corks glued together with superglue. Cheap and fun to make. Link to comment Share on other sites More sharing options...
Earl B. Posted September 9, 2008 Share Posted September 9, 2008 And fun getting the corks too...haha...B Link to comment Share on other sites More sharing options...
Steve Braverman Posted September 9, 2008 Author Share Posted September 9, 2008 I'll post some photos later, but the float slides up and down on a sort of a track, so the shape is important. There is a brass do-hickey wrapped around the float. It's too hard to describe without a photo.Wine corks are very easy to find, I have an actual winery as my next-door neighbor Link to comment Share on other sites More sharing options...
Mark Shaw Posted September 9, 2008 Share Posted September 9, 2008 Actually it was Crazy Glue (cyanoacrylate glue) that Harold recommended. And, it works with modern gasolines. Just use a belt sander or grinding wheel to make flats on wine corks and glue tem together until you have enough cork to make what you need. The mechanism you described will require a metal slot at each end of the float and one or two guide rods so the helical twist in the flat metal spindle will cause it to rotate the indicator. Link to comment Share on other sites More sharing options...
Grandpa Posted September 9, 2008 Share Posted September 9, 2008 Steve,For cork materials, check the web site for McMaster-Carr.Grandpa Link to comment Share on other sites More sharing options...
Steve Braverman Posted September 9, 2008 Author Share Posted September 9, 2008 Ok, here are some pictures. McMaster-Carr has tapered stoppers, which I guess I can cut to shape. This float is 1.5" in diameter and 1" tall. Link to comment Share on other sites More sharing options...
Grandpa Posted September 9, 2008 Share Posted September 9, 2008 Steve,I think that the cork stoppers offered by McMaster-Carr will solve your cork material problem. McMaster-Carr does not have a minimum order size.You can also purchase 4"x8"x3" cork blocks (for floats) from the Restoration Supply Company (RSC) in Escondido, CA. Visit: http://www.restorationstuff.com/The floats that I have replaced were coated with (as I recall) vanish to seal them.Grandpa Link to comment Share on other sites More sharing options...
Steve Braverman Posted September 9, 2008 Author Share Posted September 9, 2008 Thanks Grandpa,I didn't think of Restoration Supply. I've dealt with them in the recent past, and they are great. They have all sorts of neat stuff. Link to comment Share on other sites More sharing options...
Mark Shaw Posted September 9, 2008 Share Posted September 9, 2008 Steve, Here are some photos to encourage you to drink some wine and make up the cork you need. Link to comment Share on other sites More sharing options...
HarryJ Posted September 12, 2008 Share Posted September 12, 2008 The cork aside.....That is an interesting design to the Franklin sending unit. How does it work??? Link to comment Share on other sites More sharing options...
Steve Braverman Posted September 12, 2008 Author Share Posted September 12, 2008 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HarryJ</div><div class="ubbcode-body">The cork aside.....That is an interesting design to the Franklin sending unit. How does it work??? </div></div>It's a mechanical thing with the gauge right on the tank. Very simple. There is also a reserve device built in. Harry, your series 11 should have had the same thing.I'll post another photo tomorrow. Link to comment Share on other sites More sharing options...
Marty Roth Posted September 13, 2008 Share Posted September 13, 2008 Steve:I've been told that the varnish was not necessary, but used it anyway on both our '17 Franklin 9A Touring, and our '34 Buick when re-doing the gas tanks.I found all kinds of cork at a local FISHING / Sporting goods shop, but had just bought some from our local ACE HARDWARE - even less expensive.Does VFMA and Al Braverman make a connection?Marty RothAura Vincit Link to comment Share on other sites More sharing options...
Steve Braverman Posted September 15, 2008 Author Share Posted September 15, 2008 Thanks to Harry J, I got my cork. He saw this post and agreed to send me a block of cork free of charge. This is the greatest club!Hopefully the '23 will be back on the road soon. Link to comment Share on other sites More sharing options...
oldcar Posted October 23, 2008 Share Posted October 23, 2008 Hi SteveIf you buy a bottle of good Australian "Sparkling" wine. remove cork and having enjoyed the wine put the cork in your microwave oven for 15-30 seconds and you will find that its diameter expands remarkably. Watch and hit the stop button when it has reached the required size. Believe me it works!oldcar Link to comment Share on other sites More sharing options...
Dave_B Posted October 23, 2008 Share Posted October 23, 2008 They sell all sizes of corks in my local hardware store. Check there. It may be that simple. Might be able to find them in Home Depot or Lowes, who knows. A hobby shop or a craft store like Michels may have them too.Dave Link to comment Share on other sites More sharing options...
keiser31 Posted October 23, 2008 Share Posted October 23, 2008 There are some craft stores or places like Pier One that sell a wide mouth potpourri jar with a big fat cork in it that can be trimmed down and shellacked. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now