billbuickgs
Members-
Posts
1,505 -
Joined
-
Last visited
-
Days Won
1
Content Type
Forums
Gallery
Events
Everything posted by billbuickgs
-
2016 Buick Club of America 50th Anniversary Event
billbuickgs replied to 38Buick 80C's topic in Buick - Meets & Tours
Thanks Brian , That sounds great for the outside venders ! Bill -
2016 Buick Club of America 50th Anniversary Event
billbuickgs replied to 38Buick 80C's topic in Buick - Meets & Tours
Are the outdoor vender spaces on grass or macadam ?? I would like to put up a small canopy. Thanks Bill -
THANK, Found a sealed quart of dextron ATF in the garage . Bill
-
Type A is called for but can I add dextron II or III to the existing fluid ?? Bill
-
Very nice Buick. Had one just like it ( Black ) and second gear pulled past 60 with no problem !!!!!!!!!!!!! Bill
-
Larry, Fred called me this morning about his accident . It was a hit and run ! Sad that he doesn't want to take the wagon to Allentown because of the mishap . I told him everyone has a fender bender and that his wagon is still very sharp !!!! He said he would buy a NOS unit if one is out there. Bill
-
15 x 6 steel wheel 1955 or earlier wanted
billbuickgs replied to billbuickgs's topic in Buick - Buy/Sell
ttt 1 or 2 wheels as stated above. PM me with Pics and price Bill -
Larry, The car sat in the New Mexico sun all its life and the seats exploded . I have the original seats, basically. The springs are like new but everything else is toast. I bought the front and rear seats in very nice shape , front bolted in and the rear needs a little work to fit. I will never restore this Buick to be original, It would be $30000 + to do this car and the finished value would be mid 20's at best. I'm going to enjoy it for what it is , a very solid old car to have fun with ! Bill
-
Mark I hope to be at the tech session Sunday, Will talk then Bill
-
That is the standard wheel on a 55 Special , optional had the horn ring . This car has p steering , dynaflow but no radio ,no back up lights , std steering wheel , clear glass all around and dog dish hub caps. A New Mexico car with no rust holes and original chrome !!!!! Bill
-
Up date on my 55 century 2 dr sedan clone. I have 2 of the 15 x6 wheels mounted on the wider tires , a used front seat out of a 53 2 dr sedan in very good shape , emblems and portholes mounted and nos dog dish caps. Had a dent in the left front fender . Need to buy a water pump and install the new hoses ( all the trans cooling lines, heater and defrost ). I have the 3 duce manifold and carbs, air cleaners etc, but not installed. I'm not liking the red wheels but leaving the patina look with a satin clear , it may grow on me. I hope the cars I park next to at Allentown understand that their Buick can't catch anything from my Buick !!!! My granddaughter said "that looks like TOWMATHER mother " So this is 'BERTHA BUICK" , TOWMATERS MOM ! PS Still looking for 2 15 x6 wheels 1948 to 55 Bill
-
tempting just for the wheels !!! Bill
-
15 x 6 steel wheel 1955 or earlier wanted
billbuickgs replied to billbuickgs's topic in Buick - Buy/Sell
Still looking for 1 or 2 wheels PM with pics & price Thanks Bill -
My 55 buick sat for some years and has heavy rust build up in the cooling system. I had to change a freeze plug in the block and notice the very heavy rust . Any ideas on removing the rust without boiling the block ????? I have the water pump and water manifold ( thermo housing ) off. Bill
-
1955 Century dashboard applique, used, for sale
billbuickgs replied to Pete Phillips's topic in Buick - Buy/Sell
Well I started the bidding , see how long it will hold up . Bill -
1953 Roadmaster and Skylark used the same style air cleaner as the 54 thru 56 Buick with the 4 barrel carb . Bill
-
15 x 6 steel wheel 1955 or earlier wanted
billbuickgs replied to billbuickgs's topic in Buick - Buy/Sell
Ed, The wheels will go on a 1955 Special Clone to a Century ( model 68 ). The centers are the same from 46 (maybe 42 big series) to 1955 ( some 56's) with the guide pin hole, 5 slots and a small round hole next to the slots. The big difference is 5 1/2 " width and 6" width. Thanks Bill -
15 x 6 steel wheel 1955 or earlier wanted
billbuickgs replied to billbuickgs's topic in Buick - Buy/Sell
Thanks, Looking for just rims Bill -
Looking for 15" x 6" Buick steel wheels. I think 48 to 55 are the same ,that is , 5 slots for dog dish caps with a small round hole next to the slot . I will pick them up if you are 300 to 350 from Baltimoe Md. Thanks Bill Lagna Bca 3030
-
Look on the firewall at the body plate, either 41(special) or 61( Century) Everything else can be added or changed . bill
-
looking for 15" x 6" Buick steel (painted) wheels , 1955 or earlier ( back to 48 or 47 ). not looking for rusty wheels , but something nice condition that I could repaint. mid-Atlantic would be great! Thanks Bill
-
Looking for a specific Buick rallye wheel center cap.
billbuickgs replied to bradhohio's topic in Buick - Buy/Sell
The spinner and trishield emblem are after market, not original Buick. You might check Jegs , Summit or ebay for an item like it . -
1956 model 48 (Modified)
billbuickgs replied to Red Dawn's topic in Buick - Performance and Modified
I had some knee problems starting in Sept that kept me from rolling around on the garage floor. After my third operation in Feb , things are starting to look up !!!!!!!!!!!!! Bill -
1956 model 48 (Modified)
billbuickgs replied to Red Dawn's topic in Buick - Performance and Modified
Hi Mark, WOW!!! They did a great job installing the 66 engine in your 56 BUICK. The outside looks as good as it did at the BOOM picnic last summer. The under hood is " OUT OF BOUNDS " , just a great job !!! Bill