oldford

Ring and pinion set to fit Marmon D74, E75, 34C. Slight surface rust, may be unused. Ring: 41 teeth; Pinion: 10 teeth. $1000 set. Ring gear only (no pinion) NEW 49 teeth. $800. Ring gear only (no pinion) used, but decent 48 teeth. $600. Complete differential cluster with gears, real nice. $1200. Can bring to Hershey. Frank Iaccino 518-755-0986

Differential ring and pinion gear set believed to be Packard Twin Six. Ring: 50 teeth; Pinion: 13 teeth. Pinion P/N: 141373-13. Ring: 19-545. Some surface rust, but otherwise appears to be unused. $1000 Can bring to Hershey. Frank Iaccino 518-755-0986

Most likely an aftermarket radiator script for the Model T Ford. Repro vendors have them... Frank

Sorry, I have several Model T axles and this is MUCH heavier. But thanks... Frank

No one??

I got this rear axle shaft about 20 years ago from an old Ford dealership, so I'm guessing it fits a Ford, but I can't find it in my Ford Chassis Parts Manual. Any help? 32" long, 1.625" Dia, 6 spline end, 7/8 x 14 thread. Thanks for the help... Frank

Not sure how rare it is, every Reo T6 had one.😄

Reo: 1923-1926 Model T6 and and Models E & G Frank

Check the tread on a Lester from Universal Tire. I think Lesters offer the softest, smoothest ride of any tire offered today... Frank

I drove a Waverly maybe 20 years ago that was owned by a friend who lived near Boston. Loved that car. It went for sale a few years later, but I didn't have the money. I do now, but the car is somewhere else... Frank

I remember the Henry Ford movie starring Cliff Robertson in 1987. It was just full of inaccuracies. It started with the camera moving silently through a machine shop, with men's voices in the background discussing the new Ford engine for 1908. Supposedly, it was Henry and his engineers and they were discussing the new casting and the internal magneto design. As the camera zoomed in on the engine, there, sitting next to the men was a 1926-27 engine with wide pedals. I knew I was in trouble... Frank

You need to post dimensions. The wood wheel hubcaps had the same disk, but the pins that secure it to the casting are on the sides. Frank

If you want to try my spring, we can deal. If you find out it is wrong, just send it back for full refund less shipping. Frank Since your spring appears to be broken, are the mounting ears on the same side, or opposite? Mine are on the same side.

I may have some, I'll check today and get back to you... Frank I just checked, all dimensions are the same, but mine spring winds clockwise, yours counter clockwise. Sorry.

I found this through a Google search, City of Boston:

Could be, but there may not be enough of the truck to show the differences between the two years. If you say it's a 34, then I guess it's a 34.... Frank

I don't know about where you live, but here, premixed is 50% higher in cost that the straight. I can get 2 gallons of straight for about $20 and one gallon of 50/50 for $18. I can add my own water... By the way, the container actually holds 4 quarts... Frank

Just a note to inform others about the new (at least to me) SuperTech antifreeze containers at Walmart. Now I don't believe Walmart makes its own antifreeze, or even its own containers, but take a look at what I discovered. These are 4 quart containers with markings on the side to delineate quart measures. I highlighted the markings with red to make it easier to see. Notice that the top most mark is 3QT (3 quarts) and the mark just below that is 3L (3 liters). Pay attention to the 1 liter mark. If you think back to your school days, everyone knows that a liter is bigger than a quart, at least it used to be... I'm not picking on the Walmart brand, just informing you if you unwittingly use the marks on the side of the container to help you make a 50/50 mixture. I placed the black marks at 1/4 intervals to show where the quart marks should have been. Frank

I would get a name brand 6 volt coil like Standard/Blue Streak. Avoid the cheapest ones, probably made in China. Once you get it running, you can take the time to either repair the original ones or toss them... Frank

According to Rock Auto, the Autolite 295 is the correct plug for the stock cast iron head. Frank

Nice job!!!

My opinion, the lenses are worth more than the lights. Frank

Truck is definitely a 1932, cat may be a bit older... Frank

Intersections in New Jersey have been forcing drivers to do just that for years. Frank

I have a set of five of these rims. Not sure of the brand, but they are 3 piece rims for 25 inch straight side tires. some surface rust, but otherwise are in very good condition. Can deliver to Stowe next month. $1000 Frank 518-755-0986