JD-Auburn Fan - Alabama Posted February 28 Share Posted February 28 (edited) Greetings from lower Alabama. New guy and hoping you can point me in the right direction for finding a part and give some insight on the package. I'm trying to help a buddy out over in Europe that has a 1929 Dodge. He's been restoring it for quite some time now over the years and has reached out to me for some help in acquiring a part. Where in the world would I go about finding one? He passed along a 12 page manual that I'm including a few pictures of. Steward Vacuum Gasoline System - Model 116-H Greatly appreciate it. JD Edited February 28 by JD-Auburn Fan - Alabama (see edit history) Link to comment Share on other sites More sharing options...
stakeside Posted February 28 Share Posted February 28 41 minutes ago, JD-Auburn Fan - Alabama said: Greetings from lower Alabama. New guy and hoping you can point me in the right direction for finding a part and give some insight on the package. I'm trying to help a buddy out over in Europe that has a 1929 Dodge. He's been restoring it for quite some time now over the years and has reached out to me for some help in acquiring a part. Where in the world would I go about finding one? He passed along a 12 page manual that I'm including a few pictures of. Steward Vacuum Gasoline System - Model 116-H Greatly appreciate it. JD These appear on this forum. Run an ad in the parts wanted section of this forum. I found mine on eBay. Mine is a 216AF. Link to comment Share on other sites More sharing options...
stakeside Posted February 28 Share Posted February 28 Just now, stakeside said: These appear on this forum. Run an ad in the parts wanted section of this forum. I found mine on eBay. Mine is a 216AF. Link to comment Share on other sites More sharing options...
stakeside Posted February 28 Share Posted February 28 Check with Meyers dodge parts for rebuild kit. 1 Link to comment Share on other sites More sharing options...
John Bloom Posted February 28 Share Posted February 28 I bought a rebuild kit from Dennis @dl456on this forum, check with him, friendly and helpful. 2 Link to comment Share on other sites More sharing options...
pkhammer Posted February 28 Share Posted February 28 Check with @old car fan on this forum. 3 Link to comment Share on other sites More sharing options...
dodge28 Posted February 29 Share Posted February 29 What part are you looking for ? Vintage Restoration and Reproduction in Australia ha s gone out of business, (retired) they are selling out whatever stock they have. I just bought a DOD 73 for my distributor, a plate for modern points and a DOD 71. The Australian dollar is a good bargain at present They have covers and gaskets for vacuum tanks. Link to comment Share on other sites More sharing options...
old car fan Posted February 29 Share Posted February 29 We can supply rebuild kits and any parts you may need. Let us know. 2 Link to comment Share on other sites More sharing options...
JD-Auburn Fan - Alabama Posted February 29 Author Share Posted February 29 Good morning, my buddy is needing the complete assembly. Not a rebuild kit. Really appreciate the feedback. JD Link to comment Share on other sites More sharing options...
old car fan Posted February 29 Share Posted February 29 Let me get to the shop,to look up what tank he is needing. Link to comment Share on other sites More sharing options...
old car fan Posted February 29 Share Posted February 29 (edited) All of our information from Stewart Warner tanks,list nothing for 1929. Then found this. Sorry, can't seem to upright photo.We can fix you up with any Stewart tank .Just need to know what you need. Edited February 29 by old car fan (see edit history) Link to comment Share on other sites More sharing options...
30DodgePanel Posted February 29 Share Posted February 29 1 hour ago, old car fan said: Sorry, can't seem to upright photo. Guys, this is so easy to fix if you just try it a few times. Simply right click on your upside down image and copy. Then go to Paint (on every computer) and paste. Then rotate 90 degrees right twice. Then using the snippet tool (again, on every modern PC) select new and highlight the photo and copy. Then return to your post on AACA forums and paste. It literally takes about 5 seconds once you do it a few times. Link to comment Share on other sites More sharing options...
30DodgePanel Posted February 29 Share Posted February 29 (edited) 7 hours ago, JD-Auburn Fan - Alabama said: Good morning, my buddy is needing the complete assembly. Not a rebuild kit. Really appreciate the feedback. JD Check eBay frequently as recommended above or post a ad in the "Parts Wanted" section of the forums. Click on the link below. Good luck Parts Wanted - Antique Automobile Club of America - Discussion Forums (aaca.org) Also check the "Parts For Sale" section of the forums daily, never know when someone might have one. Edited February 29 by 30DodgePanel (see edit history) Link to comment Share on other sites More sharing options...
old car fan Posted February 29 Share Posted February 29 Thanks 30DodgePanel for the help. Was on my phone, tried everything, 1 Link to comment Share on other sites More sharing options...
kramaton Posted March 1 Share Posted March 1 On 2/28/2024 at 1:29 PM, JD-Auburn Fan - Alabama said: Greetings from lower Alabama. New guy and hoping you can point me in the right direction for finding a part and give some insight on the package. I'm trying to help a buddy out over in Europe that has a 1929 Dodge. He's been restoring it for quite some time now over the years and has reached out to me for some help in acquiring a part. Where in the world would I go about finding one? He passed along a 12 page manual that I'm including a few pictures of. Steward Vacuum Gasoline System - Model 116-H Greatly appreciate it. JD I have this one. Looks in decent shape. If you think you could use it call or text 412 818 1320. Dave Link to comment Share on other sites More sharing options...
old car fan Posted March 1 Share Posted March 1 How much? Link to comment Share on other sites More sharing options...
kramaton Posted March 1 Share Posted March 1 18 minutes ago, old car fan said: How much? PM me please. Link to comment Share on other sites More sharing options...
stakeside Posted March 2 Share Posted March 2 My tank is specifically for my truck. Be sure and match tank size required for the vehicle. Some engines have higher gas flow volume requirements. My DA6 truck needs longer 12 1/2 tank for more volume. 1 Link to comment Share on other sites More sharing options...
30DodgePanel Posted March 2 Share Posted March 2 (edited) On 2/29/2024 at 5:18 AM, JD-Auburn Fan - Alabama said: Good morning, my buddy is needing the complete assembly. Not a rebuild kit. Really appreciate the feedback. JD Call kramaton before someone else tries to buy it first. Edited March 2 by 30DodgePanel (see edit history) Link to comment Share on other sites More sharing options...
ron hausmann Posted March 3 Share Posted March 3 All, I have several Stewart tank models complete and/or in parts. And different Stewart mounting brackets. I also have several new rebuild kits. If anybody wants any of my parts, please PM me, with type of Stewart (dimensions of outside) and if you arent buying a complete one, which parts. l am selling off a lifelong collection of 1915-1929 exotic car parts that I’ve canabalized to get 12 complete cars out of. I likely have anything you guys want. Ron Hausmann P.E. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now