Apple Valley Stainless Fasteners - Bloomington, IN

[Bill - 29 Buick]

Anyone have contact information for Apple Valley Stainless Fasteners - Bloomington, IN ?

 

They used to come to Hershey but haven't been there the past couple of years.

 

Thanks.

 

Bill McLaughlin

1929 McLaughlin Buick Roadster

[Bill - 29 Buick]

... or anyone who can supply small fillister head stainless steel bolts.

 

Thanks.

 

Bill McLaughlin

[EmTee]

Can you post a picture of what you are looking for?

[Fred Rawling]

I find a lot of stuff at Ace Hardware.  There is an Ace industrial Hardware in Torrance, Ca. that has a huge selection of bolts and screws. The other places are McMcaster Carr and McFadden Dale on line.

[Ben Bruce aka First Born]

3 hours ago, EmTee said:

Can you post a picture of what you are looking for?

 

I had to look that on up!

  The head, whether bolt or screw, is thicker, top to bottom, than "regular".

 

  Ben

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

[Bill - 29 Buick]

3 hours ago, EmTee said:

 

Can you post a picture of what you are looking for?

 

Here is a Fillister head bolt. 
 

Bill McLaughlin 

[Brian_Heil]

Posting a loose screw on this site could be a problem.  

[27donb]

6 hours ago, Brian_Heil said:

Posting a loose screw on this site could be a problem.  

 

It's my selfie! 😂

 

McMaster carr:

 

[Frank DuVal]

There are also Cheese Head screws!

 

These have a flatter head than Fillister, usually. Some pictures look the same.

 

https://www.mcmaster.com/products/cheese-head-screws/?s=screws

[EmTee]

18 hours ago, Bill - 29 Buick said:

Here is a Fillister head bolt. 

OK, thanks for the picture.  When you said 'bolt' I wasn't sure whether you meant a hex-head or just a slotted head screw.  I know the original hex-head bolts on my '38 Buick have a thicker head than modern bolts.  I haven't seen any new replacements that have a similar thick hex head.  Fillister head screws should be available from several sources.

 

Example: https://restorationstuff.com/