Source for 1 gauge ground straps and battery cables

[LewisMend]

finding the correct 1-gauge ground straps for my 54 Hornet.  I need both the

  I have had no luck finding the correct 1-gauge ground straps for my 54 Hudson Hornet.  I need both a battery to battery tray bracket (12 inch) as well as the batter tray to  motor mount (6-7 inch)

 

I also could use, although not as dire a need, the correct size, cloth covered battery to solenoid as well as the solenoid to starter insulated cables. 

 

Does anyone have a source?  

to battery tray bracket (12 inch) as well as the batter tray to  motor mount (6-7 inch)

Do you have any? Or a source?  

I also could use, although not as dire a need, the correct size, cloth covered battery to solenoid as well as the solenoid to starter insulated cables. 

[c49er]

Try brillman.com

[3macboys]

Or here  https://www.riwire.com/Catalogs/sup/pages/plasticCbl.htm  Rhode Island Wiring

[nat]

     Truck, industrial and marine shops usually have the cable and terminals to make custom cables.  Starter/generator repair shops are likely to as well. 

     Wrap them with friction tape if the shiny plastic insulation looks out of place.

[dl456]

Brillman is your best bet here.   
Custom made to size with proper terminals. 
Cloth covered 1ga., no problem. 
Dennis

[ron hausmann]

Lewis - google “welding cables” and you will get dozens of suggested vendors who do heavy-duty cables made to order. All heavy gauges available.

Ron Hausmann P.E.

[PONTIAC1953]

for 6 volt systems, I always recommend either #2 gauge or #0 gauge wire for battery cables and the original braided wire ground cable. I've heard that welding cables make excellent battery cables.