58L-Y8 Posted August 11, 2023 Share Posted August 11, 2023 For Sale: 1965 AMC Rambler American 440H 2dr Hardtop, 83K miles - $7,500 - Westbrook, ME 1965 Rambler American - cars & trucks - by owner - vehicle... (craigslist.org) Seller's Description: 1965 AMC Rambler American 440H 2 door hardtop. 6 cyl automatic transmission. Runs excellent, tires are almost new. Clean interior, no rust, ready to enjoy. Contact: Please call Mark for more info. (207) 2-3-two-2-3-twelve Sorry no text messages or emails please. I have no personal interest or stake in the eventual sale of this 1965 AMC Rambler American 440H 2dr hardtop. The Standard Catalog of American Cars, 1946-1975, Edited by John Gunnell states 8,164 1965 AMC Rambler American 440H 2 door hardtops built. 3 Link to comment Share on other sites More sharing options...
Gearheadengineer Posted August 12, 2023 Share Posted August 12, 2023 (edited) I love white cars with red interiors. And I have a soft spot for AMC products. So this is cool. The torq-thrusts make it even better. A twin stick shifter would be the icing on the cake, but alas it is not to be. I assume this is not a native Maine car. It looks like one could enjoy it as is, and reupholster the seats as a winter project. Edited August 12, 2023 by Gearheadengineer Typo (see edit history) 2 Link to comment Share on other sites More sharing options...
Twisted Shifter Posted August 12, 2023 Share Posted August 12, 2023 I've heard of and often seen Rambler American 440's (and even owned a convertible briefly many many years ago), but have never noticed the 440"H" designation. Were they all 440H's or was that a special order option. If an option, what did it consist of? Link to comment Share on other sites More sharing options...
Dave Wells Posted August 12, 2023 Share Posted August 12, 2023 28 minutes ago, Twisted Shifter said: I've heard of and often seen Rambler American 440's (and even owned a convertible briefly many many years ago), but have never noticed the 440"H" designation. Were they all 440H's or was that a special order option. If an option, what did it consist of? An engine option for 1965 was the overhead-valve 155-hp Torque Command 232-cu.in. straight-six. It featured a more modern over-square design with a large 3.75-inch bore and a short 3.50-inch stroke, whereas the venerable undersquare 195.6 had a small 3.125-inch bore and a long 4.250-inch stroke. The 232 featured a seven-main bearing block and a cast reciprocating assembly with aluminum alloy pistons. A quiet hydraulic-lifter camshaft, 1.5:1 ratio rocker arms, 1.787/1.406-inch valves in the cylinder head, a two-barrel carburetor, and a breaker-point ignition system were also employed. Though the 440, 330, and 220 models offered various body styles, the 440-H was only available as a two-door hardtop. 1 3 Link to comment Share on other sites More sharing options...
Fossil Posted August 12, 2023 Share Posted August 12, 2023 This would be the perfect start to a sleeper. It would be really hard for me to pull the reliable 232 to install a V-8 though. 1 Link to comment Share on other sites More sharing options...
Gearheadengineer Posted August 12, 2023 Share Posted August 12, 2023 23 minutes ago, Fossil said: This would be the perfect start to a sleeper. It would be really hard for me to pull the reliable 232 to install a V-8 though. https://www.motortrend.com/how-to/horsepower-turbo-4-0-amc-jeep/amp/ 1 Link to comment Share on other sites More sharing options...
Zimm63 Posted August 12, 2023 Share Posted August 12, 2023 My Dad had a 65 6 cyl, 2 door, with 3 speed on the column. Pretty sure it was a 220 model. It left him on the side of the road a couple of times. Both my brother's wrecked it, but not so much it couldn't be fixed. Dad hated that car and ended up trading it in on a 70 Dodge Challenger. 318 with a 3 speed stick shift. No idea what he was thinking with teenage drivers in the house. 1 1 Link to comment Share on other sites More sharing options...
Jim Skelly Posted August 13, 2023 Share Posted August 13, 2023 (edited) I had thought the 440H indicated that it came with bucket seats and a better engine, but apparently it didn't come standard with bucket seats. Edited August 13, 2023 by Jim Skelly update (see edit history) Link to comment Share on other sites More sharing options...
Bloo Posted August 13, 2023 Share Posted August 13, 2023 I have never been able to figure that out. I have seen so many variations on interior in these 64s and 65s I can't make any sense out of it. Link to comment Share on other sites More sharing options...
Jim Skelly Posted August 13, 2023 Share Posted August 13, 2023 I just pulled my handout from the 1965 Detroit Auto Show. It doesn't give much information, but the hardtops were designated as H models: Ambassador 990-H "bucket seats, folding armrest and center cushion standard, console and floor shift optional" Classic 770-H bucket seats were available, but it doesn't mention if they were standard or optional American 440-H "reclining bucket seats, console and Twin-Stick Floor Shift, optional" 1 Link to comment Share on other sites More sharing options...
Bloo Posted August 13, 2023 Share Posted August 13, 2023 Anybody got one with an E-Stick? Link to comment Share on other sites More sharing options...
Dave Wells Posted August 17, 2023 Share Posted August 17, 2023 (edited) IKA Torino 380W 23 of 40 Photos in Gallery Back in the mid-1950s, the now-defunct Kaiser produced cars in Argentina under the Ika nameplate. A decade later, Ika was approached by AMC. The American manufacturer provided Ika with the Rambler American platform, and the Ika Torino was born. The base Torino debuted in 1966 and was rather advanced compared with its competitors available in Argentina at the time. Three years after the debut, Ika unveiled the Torino 380W, which was the ultimate trim level of the car at the time. The IKA Torino 380W was powered by a 176-horsepower 3.8L motor under the hood. In the upcoming years, IKA released more powerful variants of the Torino based on the 380WIKA Torino 380W Back in the mid-1950s, the now-defunct Kaiser produced cars in Argentina under the Ika nameplate. A decade later, Ika was approached by AMC. The American manufacturer provided Ika with the Rambler American platform, and the Ika Torino was born. The base Torino debuted in 1966 and was rather advanced compared with its competitors available in Argentina at the time. Three years after the debut, Ika unveiled the Torino 380W, which was the ultimate trim level of the car at the time. The IKA Torino 380W was powered by a 176-horsepower 3.8L motor under the hood. In the upcoming years, IKA released more powerful variants of the Torino based on the 380W. Edited August 17, 2023 by Vinny... (see edit history) 4 1 Link to comment Share on other sites More sharing options...
58L-Y8 Posted August 17, 2023 Author Share Posted August 17, 2023 Wonder how difficult and expensive it would be to get the necessary parts from Argentina to convert a Rambler American hardtop to the IKA Torino 380W styling? 1 Link to comment Share on other sites More sharing options...
Fossil Posted August 17, 2023 Share Posted August 17, 2023 Looks like mid 70's European styling. I like it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now