rhurst Posted February 15, 2021 Share Posted February 15, 2021 Looking to buy new front wheel bearings for my Hudson. I do have the old numbers but can't find them . Did talk to Timken and they don't have any cross reference for them....too old. Do have the inside bore of the old ones. Does anyone have a source? The 415 inside bore 37.32 mm or 1.469in. The 315 has an inside bore of 25.12 or .989 in. The large one has a maximum width of 75.73mm or 2.983 in. The smaller one maximum is 62.65mm or 2.466 of an inch Link to comment Share on other sites More sharing options...
jan arnett (2) Posted February 15, 2021 Share Posted February 15, 2021 I found bearing for my 23 Moon on ebay. Link to comment Share on other sites More sharing options...
TerryB Posted February 15, 2021 Share Posted February 15, 2021 Might try your local Fastenal store. They carry lots of bearings or even McMaster Carr. Link to comment Share on other sites More sharing options...
JV Puleo Posted February 16, 2021 Share Posted February 16, 2021 (edited) I've no idea who you spoke to but both the 415 and the 315 are still listed in the Timken catalog. I can't copy the link because something is wrong with my computer but just do a google search on Timken 415... If it's still in the catalog chances are there are interchange numbers as well. They should be easy to find. Like these from ebay... https://www.ebay.com/itm/Timken-415-Tapered-Roller-Bearing-Cone-1-5-ID-Lot-of-2/124566768153?hash=item1d00c20a19:g:XfQAAOSw79JgIvhZ Edited February 16, 2021 by JV Puleo (see edit history) Link to comment Share on other sites More sharing options...
DFeeney Posted February 16, 2021 Share Posted February 16, 2021 Hello, If you go to E-Bay motors, type in Timken bearing 415, one comes up for $65. Life is good, Stay Safe, Don Link to comment Share on other sites More sharing options...
edinmass Posted February 16, 2021 Share Posted February 16, 2021 I just ordered a Timken rear wheel bearing for my 1917 White. Prices ranged from 875 dollars to 40 dollars for good used on line. Bearings usually are not very expensive. Link to comment Share on other sites More sharing options...
hwellens Posted February 16, 2021 Share Posted February 16, 2021 Here is some more info on your bearings: 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now