alsancle Posted September 12, 2015 Share Posted September 12, 2015 We have three that we were planning on bringing to Hershey See pictures below. Any ideas as to what they go on? 1. UUR-2 All Brass 2. OO-2 updraft 3. Downdraft EE-22 Link to comment Share on other sites More sharing options...
vintagerodshop Posted September 12, 2015 Share Posted September 12, 2015 The ee-22 carb would be found on a KA series Lincoln. I would like to buy it. Please Link to comment Share on other sites More sharing options...
Friartuck Posted September 12, 2015 Share Posted September 12, 2015 I believe the EE-22 is used on 32-33 Lincoln KB. Link to comment Share on other sites More sharing options...
carbking Posted September 12, 2015 Share Posted September 12, 2015 Pictures don't show sufficient information to be positive. The Lincoln is a possibility, as is Packard and Studebaker for the EE-22. Possibly Nash on the UUR-2. Jon. Link to comment Share on other sites More sharing options...
36 D2 Coupe Posted September 13, 2015 Share Posted September 13, 2015 '34 Chrysler Airflows used EE-22 carbs as well Link to comment Share on other sites More sharing options...
Grimy Posted September 13, 2015 Share Posted September 13, 2015 1931-32 Pierce 8s used UUR-2. Link to comment Share on other sites More sharing options...
carbking Posted September 13, 2015 Share Posted September 13, 2015 Stromberg made lots of different models of each of these carbs. We have 58 listings for the EE-22 and 109 listings for the UUR-2. The pictures clearly show the venturi size of the EE-22 (1 3/16). This size was used by Lincoln, Studebaker, and Packard on some of their applications. There were several different venturi sizes used. There are other differences (not always identifiable by picture) which determine the exact application. The UUR-2 did have interchangable venturii (the ones in the EE-22 are fixed), but have many other differences, including 3 different main bodies, and two different airhorns. The UUR-2 pictured has the small airhorn, thus eliminating several applications (ie Bugatti, Duesenberg, and Pierce). Often, these carbs when offered for sale, are offered as fitting the most expensive vehicles, in the hope of selling them at the maximum price. Caveat emptor is often the case on ebay. Jon. 1 Link to comment Share on other sites More sharing options...
alsancle Posted September 13, 2015 Author Share Posted September 13, 2015 Thanks for all the feedback. I'll take some better pictures and post them. You make a good point subtle differences between carbs. I know that the small 1 3/8 stamp on the side of a EX22 is the difference between a 1k carb and a 3k carb. Whoever buys these at Hershey will have them in their hands so hopefully no mistakes. Btw, any idea what a OO-22 goes on? Link to comment Share on other sites More sharing options...
36 D2 Coupe Posted September 13, 2015 Share Posted September 13, 2015 Stromberg made lots of different models of each of these carbs. We have 58 listings for the EE-22 and 109 listings for the UUR-2. The pictures clearly show the venturi size of the EE-22 (1 3/16). This size was used by Lincoln, Studebaker, and Packard on some of their applications. There were several different venturi sizes used. There are other differences (not always identifiable by picture) which determine the exact application. The UUR-2 did have interchangable venturii (the ones in the EE-22 are fixed), but have many other differences, including 3 different main bodies, and two different airhorns. The UUR-2 pictured has the small airhorn, thus eliminating several applications (ie Bugatti, Duesenberg, and Pierce). Often, these carbs when offered for sale, are offered as fitting the most expensive vehicles, in the hope of selling them at the maximum price. Caveat emptor is often the case on ebay. Jon.Thanks for the clarification. The EE-22 shown didn't look quite like the ones I'm familiar with that fit the Chrysler Airflows. Link to comment Share on other sites More sharing options...
alsancle Posted September 13, 2015 Author Share Posted September 13, 2015 I have been told that solid brass usually means marine so perhaps that is what the OO-2 is for. Here are a couple of more of the UUR-2. It has a 3 inch throat and Ed Minnie is saying it is not Pierce. Link to comment Share on other sites More sharing options...
1937hd45 Posted September 13, 2015 Share Posted September 13, 2015 I always felt bad for the WHITE truck owners that needed a Stromberg UUR-2 and found them on the Bugatti Type 57 parts piles at Hershey. On the other hand buying a White truck carb off the truck parts pile and selling to the Bugatti guy was always cause for a happy dance. Bob Link to comment Share on other sites More sharing options...
1937hd45 Posted September 13, 2015 Share Posted September 13, 2015 Photos, everyone loves photos. How is your Stutz project doing these days? Bob Link to comment Share on other sites More sharing options...
alsancle Posted September 13, 2015 Author Share Posted September 13, 2015 Stutz project is going slow Bob. Engine got pulled back out into the shop I understand and doesn't need much to finish so hopefully soon. Once it is running things will move along again. I have gotten side tracked on some other cars like an idiot. Link to comment Share on other sites More sharing options...
1937hd45 Posted September 13, 2015 Share Posted September 13, 2015 I guess a 540K would have that effect. Bob Link to comment Share on other sites More sharing options...
alsancle Posted September 13, 2015 Author Share Posted September 13, 2015 That would be a good excuse but actually a graham and a reo royale . Link to comment Share on other sites More sharing options...
vintagerodshop Posted September 14, 2015 Share Posted September 14, 2015 Not just any Reo Royale! Link to comment Share on other sites More sharing options...
Joe in Canada Posted September 15, 2015 Share Posted September 15, 2015 Stromberg made lots of different models of each of these carbs. We have 58 listings for the EE-22 and 109 listings for the UUR-2. The pictures clearly show the venturi size of the EE-22 (1 3/16). This size was used by Lincoln, Studebaker, and Packard on some of their applications. There were several different venturi sizes used. There are other differences (not always identifiable by picture) which determine the exact application. The UUR-2 did have interchangable venturii (the ones in the EE-22 are fixed), but have many other differences, including 3 different main bodies, and two different airhorns. The UUR-2 pictured has the small airhorn, thus eliminating several applications (ie Bugatti, Duesenberg, and Pierce). Often, these carbs when offered for sale, are offered as fitting the most expensive vehicles, in the hope of selling them at the maximum price. Caveat emptor is often the case on ebay. Jon.I know what you are saying about expensive cars. I spotted a light switch I needed at Hershey years ago so I asked the vender for the price of it. Rather than the price I was told you realise it is for a Dusey. My response was you realise it also fits Cadillac. I was then given an absorbent price and I moved on. Link to comment Share on other sites More sharing options...
8E45E Posted September 15, 2015 Share Posted September 15, 2015 I know what you are saying about expensive cars. I spotted a light switch I needed at Hershey years ago so I asked the vender for the price of it. Rather than the price I was told you realise it is for a Dusey. My response was you realise it also fits Cadillac. I was then given an absorbent price and I moved on. Kind of like a Blaupunkt 3-band radio I saw at a swap meet about 20 years ago, where the vendor was asking $275.00 for it stating it was for a Porsche 356 or early 911. In reality, that radio was a DIN mount and would fit anything German (and most other cars, with little modification), and I bought an identical one at a wrecking yard for $5.00! Craig 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now