Dan Marx Posted March 27, 2015 Share Posted March 27, 2015 So, about a year ago I was asked for a locking gas cap for a Model T, well didn't have one in the 8000 caps I have so, guess what, I made one. I have some locking gas caps that are made by FAAB, these are a screw on cap that fit Fiats, Dino spiders, Lancia, and other older European cars with the screw on gas caps. Hey even fit a Testarosa. Well would you believe it, the thread pattern from an aftermarket Model T cap will just fit inside the cap. Any one want to see it? Dan Link to comment Share on other sites More sharing options...
Guest Bill Wright Posted March 28, 2015 Share Posted March 28, 2015 Yes. Link to comment Share on other sites More sharing options...
60FlatTop Posted March 28, 2015 Share Posted March 28, 2015 How about a full security system? Bernie Link to comment Share on other sites More sharing options...
CarlLaFong Posted March 28, 2015 Share Posted March 28, 2015 One person, out of 10,000, knows where a Model T gas filler is located. How many would want to syphon your gas?? Link to comment Share on other sites More sharing options...
Layden B Posted March 28, 2015 Share Posted March 28, 2015 All the Model T guys know that there is a drain cock on the bottom of the sediment bowl, just open it up and the gas runs out! No siphon needed. Link to comment Share on other sites More sharing options...
Dandy Dave Posted March 28, 2015 Share Posted March 28, 2015 All the Model T guys know that there is a drain cock on the bottom of the sediment bowl, just open it up and the gas runs out! No siphon needed.Yup! Never mind taking the front seat bottom off. Dandy Dave! Link to comment Share on other sites More sharing options...
Bhigdog Posted March 28, 2015 Share Posted March 28, 2015 All the Model T guys know that there is a drain cock on the bottom of the sediment bowl, just open it up and the gas runs out! No siphon needed.That fact saved my butt at a show. My fuel pump gave it up. It would run ok but would not get gas to the carb to start. I asked pretty near everyone if they had a few ounces of gas I could use to prime the carb. A guy with a T opened the bowl drain and gave me half a soda can full.............Bob Link to comment Share on other sites More sharing options...
Dave Mellor NJ Posted March 29, 2015 Share Posted March 29, 2015 careful you don't coke up the carburetor. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now