Guest imported_MrEarl Posted October 1, 2008 Share Posted October 1, 2008 I have a couple of photographs from Buick Motor Division Research Photo Section of the 1952 Buick Skylark prototype.I have never heard or seen much about this car. I found the following by Googleing but it doesn't go into very much detail. 1952-54 Skylark Does anyone know any more about this car? I'm sure it was probably done away with. Boy wouldn't this be a barn find. Link to comment Share on other sites More sharing options...
buick840 Posted October 1, 2008 Share Posted October 1, 2008 Now that's a nice looking Buick.........I'll be placing my order tomorrow........just need to decide what color Link to comment Share on other sites More sharing options...
JohnD1956 Posted October 1, 2008 Share Posted October 1, 2008 As a barn find this would be priceless. Which causes me to wonder if it wouldn't be just a bit more fun to reconstruct one today? One that had say, a 401 with fuel injection and a 4 speed and open driveline? Maybe a set of bucket seats, and a modern electrical system that could support an A/C and decent sound system? Hmmnn, Now where can one lay their hands on a 52 Super convertible that's ruined enough to convert and solid enough to stay converted? (I sense a membership in the Modified Division coming along.) Link to comment Share on other sites More sharing options...
Aaron65 Posted October 2, 2008 Share Posted October 2, 2008 What a neat looking car! I think I like that as much as the '53 model, and I own a '53! (Not a Skylark) Link to comment Share on other sites More sharing options...
Guest imported_MrEarl Posted October 2, 2008 Share Posted October 2, 2008 Notice that apparently Mr Nickles decided early on that he didn't want ventiports on Skylarks. Link to comment Share on other sites More sharing options...
Guest DaveCorbin Posted October 2, 2008 Share Posted October 2, 2008 Dear John: Tough part first.The car Nickles started with was a 1952 Roadmater 76C. Try finding one in any condition!! Easy part next: The actual car has been crushed, so a barn find isn't going to happen. Fun part next: A BCA member that I know bought all the custom made parts (which were stripped from the car before it was crushed) and the sideview drawings about 30 years ago with the intention of re-creating the car. i won't for privacy reasons name him/her, but I HAVE seen the actual parts themselves. Regards, Dave Corbin Link to comment Share on other sites More sharing options...
JohnD1956 Posted October 3, 2008 Share Posted October 3, 2008 Dave: What's this fellow waiting for? What a great car that would be!However, in my version I would look for a Super on purpose. If I understand correctly, the difference in the two models is in the front end, with the Roadmaster being a bit longer. Since I currently only have enough resources to pursue this project in my dreams, I think the car would look better with the shorter front end. Link to comment Share on other sites More sharing options...
Guest imported_MrEarl Posted October 3, 2008 Share Posted October 3, 2008 BTW I've decided to let someone else enjoy these photos for awhile. The last one I saw sell, sold for double what my reserve is. In this case, I consider the value of the piece not to be what someone is willing to pay but rather what it will take to buy it from me. sorta the same as winebottle, half full or half empty...... '52 Skylark photos on ebay Link to comment Share on other sites More sharing options...
Guest imported_MrEarl Posted October 3, 2008 Share Posted October 3, 2008 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JohnD1956</div><div class="ubbcode-body">Dave: What's this fellow waiting for? What a great car that would be! </div></div>Boy ain't that the truth. So if the gentleman/lady has had the parts for 30 years and hasn't started building it yet, I'd say rather sadly, there's a pretty good chance he won't be around to see it finished. But hey, I can appreciate "dreams". I have a backyard full of them. Dave, what did the custom made parts consist of or what I'm wondering is what were the differences between this and a factory job. The grille looks to be the same. Link to comment Share on other sites More sharing options...
Guest David_Temple Posted October 4, 2008 Share Posted October 4, 2008 This is an interesting thread. How can anyone be certain the 1952 Skylark prototype was destroyed? I have no information on the fate of the car at all. Since there was a 1952 Eldorado prototype as well as the 1952 Skylark prototype I am left wondering if GM built a 1952 Fiesta prototype, too. If so it seems to have been forgotten. Does anyone know if one was built? Link to comment Share on other sites More sharing options...
retirednow Posted November 17, 2010 Share Posted November 17, 2010 I recently picked up a '52 super convertible which needs total restoration. Would never modify it as my late beloved uncle had one just like it. Great childhood memories of him driving us to the beach in it!! in.QUOTE=imported_JohnD1956;590698]As a barn find this would be priceless. Which causes me to wonder if it wouldn't be just a bit more fun to reconstruct one today? One that had say, a 401 with fuel injection and a 4 speed and open driveline? Maybe a set of bucket seats, and a modern electrical system that could support an A/C and decent sound system? Hmmnn, Now where can one lay their hands on a 52 Super convertible that's ruined enough to convert and solid enough to stay converted? (I sense a membership in the Modified Division coming along.) Link to comment Share on other sites More sharing options...
JohnD1956 Posted November 18, 2010 Share Posted November 18, 2010 retirednow! Oh man! how about some pictures of that Super. You're a lucky guy to have found such a car! Link to comment Share on other sites More sharing options...
retirednow Posted November 18, 2010 Share Posted November 18, 2010 (edited) Thanks!! Here'a a small picture of it. Unfortunately, I'm not very good at posting photos. One thing I'm happy about is that I only have a few parts to look around for Edited November 18, 2010 by retirednow (see edit history) Link to comment Share on other sites More sharing options...
JohnD1956 Posted November 19, 2010 Share Posted November 19, 2010 Can't see too much in that picture but I can see it's Buickful! Nice find. Link to comment Share on other sites More sharing options...
retirednow Posted November 20, 2010 Share Posted November 20, 2010 The big issue is the floor is shot. Frame is really solid though Link to comment Share on other sites More sharing options...
JohnD1956 Posted November 20, 2010 Share Posted November 20, 2010 Ok, it's a project. But it's a 52 , a Super, and a ragtop! How sweet it is! Link to comment Share on other sites More sharing options...
retirednow Posted November 20, 2010 Share Posted November 20, 2010 :D:DOk, it's a project. But it's a 52 , a Super, and a ragtop! How sweet it is! Link to comment Share on other sites More sharing options...
MrEarl Posted November 20, 2010 Share Posted November 20, 2010 Floors are easy fixes. Easy to hide the welding. Come on let us see some full size pics of that baby. Link to comment Share on other sites More sharing options...
JohnD1956 Posted November 21, 2010 Share Posted November 21, 2010 Retirednow. You're in Putnam Valley? Where? I grew up in Westchester. Also I agree w/ Mr. Earl. That car is too unique to hide. Link to comment Share on other sites More sharing options...
retirednow Posted November 21, 2010 Share Posted November 21, 2010 Oscawana Lake Rd. Where in Westchester? Link to comment Share on other sites More sharing options...
JohnD1956 Posted November 22, 2010 Share Posted November 22, 2010 Woodcrest Ave in White Plains. Then I moved to Hillside lake in Wappingers falls. Small world, isn't it? Link to comment Share on other sites More sharing options...
retirednow Posted November 23, 2010 Share Posted November 23, 2010 Small world lol. Grew up on Long Island and lived on the Island and Queens in my younger adult yrs. Only moved here about 12 yrs. ago Link to comment Share on other sites More sharing options...
Guest DaveCorbin Posted November 23, 2010 Share Posted November 23, 2010 At least two Buicks that expressed similiar ideas to the 1952 Skylark do exist today. The oldest is, of course, the Y-Job from 1938. It's probably the most famous individual Buick of them all.The other is the Blackhawk, which was built in about 1999, and is also well-known. One of our members on this thread shared the idea of a modernized drivetrain. The Blackhawk is equipped with a 455 Buick crate motor, set up with the then latest engine technology at about 580 HP. I can tell you from a ride in it in 2000 that it WILL pin you in the seat!I noted in a previous post that I had seen the body drawings many years ago. The basic change that is obvious, but doesn't show, was an about 3 inch section job to the entire car. The wheel openings were also redone, but they're pretty obvious. The starting point was a 1952 76C. It was a Ned Nickles private job, but it captured eveybody's attention, especially Harley Earls.Regards, Dave Corbin Link to comment Share on other sites More sharing options...
Guest jackmccord Posted May 20, 2011 Share Posted May 20, 2011 This car is a prototype. It is going to be for sale at the Mecum auto auction next Saturday (21st) in Indianapolis. This is televised on HD channel.Jack Link to comment Share on other sites More sharing options...
MrEarl Posted May 20, 2011 Share Posted May 20, 2011 (edited) Jack, you may be confusing the Skylarks here. There are three Skylarks on the auction block at Mecum this Saturday. 2 53 true Skylarks and this custom '54 job. 1954 Buick Skylark Custom Automatic for sale by Mecum AuctionInteresting but not my cup of tea:)THANKS for bringing this old thread up though. Since this thread, I think I recall reading that the 52 SL was involved in an accident and was totaled just a few years after it came out. Edited May 20, 2011 by MrEarl (see edit history) Link to comment Share on other sites More sharing options...
Guest jackmccord Posted May 20, 2011 Share Posted May 20, 2011 My mistake- I just checked Mecum and you're right - its a 53 blue skylark convertible. Link to comment Share on other sites More sharing options...
Guest jackmccord Posted May 20, 2011 Share Posted May 20, 2011 You're right - I checked the Mecum website and there is a 53 Skylark that was shown as a preview for the Sat program.Jack Link to comment Share on other sites More sharing options...
Anthony C Posted May 14, 2022 Share Posted May 14, 2022 It has been 11 years since anyone replied to this topic. I grew up in a family that mainly had Buicks. These are personal photographs from when I was a little boy, to the two tone Grey 2Dr Sedanette Buick model 76SI had for 39 years. The last photograph I took last April of my Brothers 1948 Buick model 71 he bought in 1960 in Marlboro, NY out of a junkyard for $40.00. I replaced seals at the rear of the Dynaflow transmission. My. Brother owns this Buick for 62 years. I drove the heck out of it before I left Florida last April. There was even a 1953 Buick Skylark in the family until a nephew rolled it over several times and crushed it with a bulldozer! I was sick! 2 1 Link to comment Share on other sites More sharing options...
Anthony C Posted May 14, 2022 Share Posted May 14, 2022 This is also the.Brother‘s Buick when him and I over hauled the engine in 2018. My Brother put rod and main bearings in that engine in 1971, and they are still there doing their job! At an idle at operating temperature the oil pressure is 17 psi going down the road it’s never less than 30 psi 3 Link to comment Share on other sites More sharing options...
NailheadBob Posted May 14, 2022 Share Posted May 14, 2022 I love this post being back into light, some really cool stuff on this forum. Thanks @Anthony C Bob 3 Link to comment Share on other sites More sharing options...
Anthony C Posted May 14, 2022 Share Posted May 14, 2022 You are very welcome Bob. I’m glad and very surprised anyone even replied to my post. That 52 Buick Skylark would have been a real sought after Buick, being the last year for the 320 Straight Eight with 170 HP. Maybe it would have had the 322 V8 in it. I actually drove the 53 Skylark we had once, the guy my Brother bought it from put a 3 speed transmission in it. But my heart belonged to the Dynaflow in a Skylark. 1 Link to comment Share on other sites More sharing options...
Anthony C Posted May 14, 2022 Share Posted May 14, 2022 It would have been nice to see retirednow’s 52, 56C. I wonder if it’s still around? Another Brother had a 51 model 46R Riviera Dynaflow, it was a powder blue with a white roof. I was with him when he bought it. He paid $50.00 for it in 1958 or 59. I was very young 5 or 6 years old. We made many trips in that Buick Special to Upstate NY from the Bronx 150 miles each way. Too bad I don’t have a physical photograph of that Buick, but I have a vivid photograph of it in my head. 1 Link to comment Share on other sites More sharing options...
retirednow Posted May 15, 2022 Share Posted May 15, 2022 2 hours ago, Anthony C said: It would have been nice to see retirednow’s 52, 56C. I wonder if it’s still around? Another Brother had a 51 model 46R Riviera Dynaflow, it was a powder blue with a white roof. I was with him when he bought it. He paid $50.00 for it in 1958 or 59. I was very young 5 or 6 years old. We made many trips in that Buick Special to Upstate NY from the Bronx 150 miles each way. Too bad I don’t have a physical photograph of that Buick, but I have a vivid photograph of it in my head. I sold the ‘56C 6 years ago. The floors and trunk pan were completely gone. The guy I sold it to had a ‘52 Super 2 dr Hdtp with a ‘52 Caddy rear clip. He wanted to make it a convertible and needed the top hardware and possibly the frame. He was also looking to put a roadmaster nose on it 1 Link to comment Share on other sites More sharing options...
Anthony C Posted May 15, 2022 Share Posted May 15, 2022 Very nice hearing from you. Back in 1975, I met a gentleman that just bought a 1952 Buick Roadmaster sedan from the original owner. That Buick had 48,000 miles on it. He took me for a ride, and even let me drive it! It rode very different than the 48. The suspension was a little stiffer, the shocks were exactly the same. The springs were stiffer but had a very good smooth ride at the same time. Whatever Buick changed in the suspension, was in the right direction. 2 Link to comment Share on other sites More sharing options...
Y-JobFan Posted May 15, 2022 Share Posted May 15, 2022 Old thread, but the 52 Skylark prototype was not stripped and crushed when they were done using it, it did meet a crushing death though 2 Link to comment Share on other sites More sharing options...
JohnD1956 Posted May 15, 2022 Share Posted May 15, 2022 38 minutes ago, Y-JobFan said: Old thread, but the 52 Skylark prototype was not stripped and crushed when they were done using it, it did meet a crushing death though Oh man! Now this is depressing! Link to comment Share on other sites More sharing options...
Y-JobFan Posted May 15, 2022 Share Posted May 15, 2022 It is, but it lays the story and rumors to rest Link to comment Share on other sites More sharing options...
g-g-g0 Posted May 16, 2022 Share Posted May 16, 2022 On 5/14/2022 at 8:30 PM, retirednow said: I sold the ‘56C 6 years ago. The floors and trunk pan were completely gone. The guy I sold it to had a ‘52 Super 2 dr Hdtp with a ‘52 Caddy rear clip. He wanted to make it a convertible and needed the top hardware and possibly the frame. He was also looking to put a roadmaster nose on it Not to sidetrack from the original post but oddly enough, I sold a complete 52 Roadmaster front end to a guy in NY. Just confirmed with @retirednow that it was the same guy that bought his car! Crazy but small world! 1 Link to comment Share on other sites More sharing options...
Anthony C Posted May 16, 2022 Share Posted May 16, 2022 (edited) Nice 53 rag top GG. The 53 Super in my post was a freak! It would smoke the rear tire so bad that he had to let off because there was too much smoke we couldn't see, and did it in Drive, not Low. It was fast for a 53 Buick with a Dynaflow transmission. Can you post any photographs of your 53? Edited May 16, 2022 by Anthony C corrections (see edit history) Link to comment Share on other sites More sharing options...
B Jake Moran Posted May 19, 2022 Share Posted May 19, 2022 But Dave Corbin said it was crushed as in junkyard crushed. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now